Jump to content

I/O error


BONLEV

Recommended Posts

I saw this error on the forum but mine is a bit different I think.

Trying to burn a blu ray disc wih my external samsung SE-506 burner.

I use the verbatim datalife BD-R discs. I used this spindle before without issues.

 

I updated today my burner firmware. Makes no difference.

I also burned a blu ray without an error (2 times) but the disc is not recognized in my blu ray player. I have 2 standalone blu ray players  + in a Playstation 4 it also not worked.

 

The strange is if I burn the files like a data blu ray it worked in my blu ray player. But I want a normal blu ray because I made a menu.

So is my blu ray burner the issue? 

 

 

 

 

error imgburn blu ray.JPG

Link to comment
Share on other sites

The error message is basically saying that the sector on the disc is unreadable.

That problem is unlikely to be the reason for your players not being able to play the disc. I would say they don't like something about the way it's been authored - maybe that comes down to tmpgenc?

Link to comment
Share on other sites

14:25:03 ImgBurn Version 2.5.8.0 started!
I 14:25:03 Microsoft Windows 8 Core x64 Edition (6.2, Build 9200)
I 14:25:03 Total Physical Memory: 12 500 508 KiB  -  Available: 9 462 480 KiB
I 14:25:03 Initialising SPTI...
I 14:25:03 Searching for SCSI / ATAPI devices...
I 14:25:03 -> Drive 1 - Info: MATSHITA DVD-RAM UJ8E0 1.00 (E:) (SATA)
I 14:25:06 -> Drive 2 - Info: TSSTcorp BDDVDW SE-506BB TS00 (F:) (USB 2.0)
I 14:25:06 Found 1 DVD±RW/RAM and 1 BD-RE XL!
I 14:25:38 Operation Started!
I 14:25:38 Source File: C:\disc image blu ray nelekes\tmpgenc disc image blu ray.iso
I 14:25:38 Source File Sectors: 11 826 176 (MODE1/2048)
I 14:25:38 Source File Size: 24 220 008 448 bytes
I 14:25:38 Source File Volume Identifier: 15_06_2019
I 14:25:38 Source File Volume Set Identifier: C6C670BE15_06_2019
I 14:25:38 Source File Application Identifier: Corel Corporation
I 14:25:38 Source File Implementation Identifier: AS_Storage 5.08.14.3
I 14:25:38 Source File File System(s): UDF (2.50)
I 14:25:38 Destination Device: [0:0:0] TSSTcorp BDDVDW SE-506BB TS00 (F:) (USB)
I 14:25:38 Destination Media Type: BD-R (Disc ID: CMCMAG-BA5-000)
I 14:25:38 Destination Media Supported Write Speeds: 2x; 4x; 6x
I 14:25:38 Destination Media Sectors: 12 219 392
I 14:25:38 Write Mode: BD
I 14:25:38 Write Type: DAO
I 14:25:38 Write Speed: 2x
I 14:25:38 Hardware Defect Management Active: No
I 14:25:38 BD-R Verify Not Required: Yes
I 14:25:38 Link Size: Auto
I 14:25:38 Lock Volume: Yes
I 14:25:38 Test Mode: Yes
I 14:25:38 OPC: No
I 14:25:38 BURN-Proof: Enabled
I 14:25:38 Write Speed Successfully Set! - Effective: 8 992 KB/s (2x)
I 14:25:43 Filling Buffer... (80 MiB)
I 14:25:44 Writing LeadIn...
I 14:25:45 Writing Session 1 of 1... (1 Track, LBA: 0 - 11826175)
I 14:25:45 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 11826175)
I 15:06:25 Synchronising Cache...
I 15:06:32 Closing Track...
I 15:06:33 Finalising Disc...
I 15:06:53 Cycling Tray after Test Write...
I 15:06:57 Exporting Graph Data...
I 15:06:57 Graph Data File: C:\Users\tient_000\AppData\Roaming\ImgBurn\Graph Data Files\TSSTcorp_BDDVDW_SE-506BB_TS00_ZATERDAG-15-JUNI-2019_14-25_CMCMAG-BA5-000_2x.ibg
I 15:06:57 Export Successfully Completed!
I 15:06:57 Operation Successfully Completed! - Duration: 00:41:18
I 15:06:57 Average Write Rate: 9 697 KiB/s (2.2x) - Maximum Write Rate: 9 743 KiB/s (2.2x)
I 15:10:25 Operation Started!
I 15:10:25 Source File: C:\disc image blu ray nelekes\tmpgenc disc image blu ray.iso
I 15:10:25 Source File Sectors: 11 826 176 (MODE1/2048)
I 15:10:25 Source File Size: 24 220 008 448 bytes
I 15:10:25 Source File Volume Identifier: 15_06_2019
I 15:10:25 Source File Volume Set Identifier: C6C670BE15_06_2019
I 15:10:25 Source File Application Identifier: Corel Corporation
I 15:10:25 Source File Implementation Identifier: AS_Storage 5.08.14.3
I 15:10:25 Source File File System(s): UDF (2.50)
I 15:10:25 Destination Device: [0:0:0] TSSTcorp BDDVDW SE-506BB TS00 (F:) (USB)
I 15:10:25 Destination Media Type: BD-R (Disc ID: CMCMAG-BA5-000)
I 15:10:25 Destination Media Supported Write Speeds: 2x; 4x; 6x
I 15:10:25 Destination Media Sectors: 12 219 392
I 15:10:25 Write Mode: BD
I 15:10:25 Write Type: DAO
I 15:10:25 Write Speed: 2x
I 15:10:25 Hardware Defect Management Active: No
I 15:10:25 BD-R Verify Not Required: Yes
I 15:10:25 Link Size: Auto
I 15:10:25 Lock Volume: Yes
I 15:10:25 Test Mode: No
I 15:10:25 OPC: No
I 15:10:25 BURN-Proof: Enabled
I 15:10:25 Write Speed Successfully Set! - Effective: 8 992 KB/s (2x)
I 15:11:10 Filling Buffer... (80 MiB)
I 15:11:10 Writing LeadIn...
I 15:11:28 Writing Session 1 of 1... (1 Track, LBA: 0 - 11826175)
I 15:11:28 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 11826175)
I 15:36:30 Synchronising Cache...
I 15:36:35 Closing Track...
I 15:36:36 Finalising Disc...
I 15:37:47 Exporting Graph Data...
I 15:37:47 Graph Data File: C:\Users\tient_000\AppData\Roaming\ImgBurn\Graph Data Files\TSSTcorp_BDDVDW_SE-506BB_TS00_ZATERDAG-15-JUNI-2019_15-10_CMCMAG-BA5-000_2x.ibg
I 15:37:47 Export Successfully Completed!
I 15:37:47 Operation Successfully Completed! - Duration: 00:27:21
I 15:37:47 Average Write Rate: 15 747 KiB/s (3.6x) - Maximum Write Rate: 26 549 KiB/s (6.0x)
I 15:37:47 Cycling Tray before Verify...
W 15:38:18 Waiting for device to become ready...
I 15:38:31 Device Ready!
I 15:38:32 Operation Started!
I 15:38:32 Source Device: [0:0:0] TSSTcorp BDDVDW SE-506BB TS00 (F:) (USB)
I 15:38:32 Source Media Type: BD-R (Disc ID: CMCMAG-BA5-000)
I 15:38:32 Source Media Supported Read Speeds: 2,2x; 4x; 6x
I 15:38:32 Source Media Supported Write Speeds: 2x; 4x; 6x
I 15:38:32 Source Media Sectors: 11 826 176
I 15:38:32 Source Media Size: 24 220 008 448 bytes
I 15:38:32 Image File: C:\disc image blu ray nelekes\tmpgenc disc image blu ray.iso
I 15:38:32 Image File Sectors: 11 826 176 (MODE1/2048)
I 15:38:32 Image File Size: 24 220 008 448 bytes
I 15:38:32 Image File Volume Identifier: 15_06_2019
I 15:38:32 Image File Volume Set Identifier: C6C670BE15_06_2019
I 15:38:32 Image File Application Identifier: Corel Corporation
I 15:38:32 Image File Implementation Identifier: AS_Storage 5.08.14.3
I 15:38:32 Image File File System(s): UDF (2.50)
I 15:38:32 Read Speed (Data/Audio): MAX / MAX
I 15:38:34 Read Speed - Effective: 2,2x - 6x
I 15:38:34 Verifying Session 1 of 1... (1 Track, LBA: 0 - 11826175)
I 15:38:34 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 11826175)
W 15:47:58 Failed to Read Sectors 3998368 - 3998399 - Reason: L-EC Uncorrectable Error
W 15:48:08 Failed to Read Sector 3998368 - Reason: L-EC Uncorrectable Error
W 15:52:49 Retrying (1)...
W 15:52:56 Retry Failed - Reason: L-EC Uncorrectable Error
E 15:55:43 Failed to Read Sector 3998368 - Reason: L-EC Uncorrectable Error
E 15:55:43 Failed to Verify Sectors!
I 15:55:44 Exporting Graph Data...
I 15:55:44 Graph Data File: C:\Users\tient_000\AppData\Roaming\ImgBurn\Graph Data Files\TSSTcorp_BDDVDW_SE-506BB_TS00_ZATERDAG-15-JUNI-2019_15-10_CMCMAG-BA5-000_2x.ibg
I 15:55:44 Export Successfully Completed!
E 15:55:44 Operation Failed! - Duration: 00:17:10
I 15:55:44 Average Verify Rate: 7 771 KiB/s (1.8x) - Maximum Verify Rate: 18 016 KiB/s (4.1x)
I 15:56:28 Close Request Acknowledged
I 15:56:28 Closing Down...
I 15:56:28 Shutting down SPTI...
I 15:56:28 ImgBurn closed!

about the data blu ray: when it failed with imgburn I thought it was maybe imgburn caused the problem. So I tried another free burning program where I could choose blu ray video and data blu ray. The blu ray video was also disc error on my standalone blu ray player (s) but the data blu ray played.

When inserting this There is not automatically a menu to choose which video chapter you want to play (like a normal dvd movie) . There were folders and I had to go the BDMV folder  -> STREAM -> and click the M2TS file to start the video. There a 3x M2TS files. 2 are the menu (page 1 and 2) and the other is the video file. 

Normally when you insert a DVD or a blu ray move it starts the menu chapter.

 

 

 

Link to comment
Share on other sites

Just as I thought.  It's most likely junk media.  Here's your problem:

I 14:25:38 Destination Media Type: BD-R (Disc ID: CMCMAG-BA5-000)

 

You may be using Verbatim BD-R but this is the 2nd time I've seen foreign, e.g. outside of the US, Verbatim BD-R that is so called DataLife Plus that is not DataLife Plus but CMC garbage.  In the US, there is no such thing as DataLife Plus Verbatim BD-R.  It's all just BD-R and none of it is CMC.  It appears outside of the US, Verbatim is trying to screw over their customers.

 

The only solution is try something else, like Panasonic BD-R, if they make it.  TDK may make BD-R and if they do it may be good, but TDK does make BD-RE that is CMC junk.  You could always try importing Verbatim BD-R from the US.  The other person I saw with this problem on the board imported the good stuff from the US to solve their problem.

 

Oh, IC what you're saying about the data Blu-Ray.  It's not a Blu-Ray Video you're playing.  You're playing the folder contents via your player's browser.  This won't present you with a menu like a Blu-Ray Video disc will.  It seems this TMpegEnc software is not generating compliant BD Video content.  This is inferring that TMpegEnc even creates a menu for its BD Video content.  It may just start playing with the first chapter.  I don't create BD Video so I can't say what to do at this point.  Of course, why it doesn't start playing when you have the disc inserted as a BD Video, I couldn't say.

Link to comment
Share on other sites

I had 1 empty blu ray disc from mediarange to test. mediacode PHILIP R04

Imgburn burn it without problems but again my standalone players didn't play it.

In the past I used these mediarange and the verbatim datalife without a problem from the same spindle.

So I think my burner is the problem. I just ordered the verbatim blu ray burner. I hope this will fix the problem. Will update here.

Link to comment
Share on other sites

Such issues are rarely hardware related.  Generally swapping in all new hardware won't fix such a problem.  The problem is most likely software based.  The software that made your content probably isn't making it right.

Link to comment
Share on other sites

On 6/18/2019 at 7:41 PM, dbminter said:

Such issues are rarely hardware related.  Generally swapping in all new hardware won't fix such a problem.  The problem is most likely software based.  The software that made your content probably isn't making it right.

found the problem! It was a software problem. I made a new blu ray image from my film project with authoring works and now it played on my standalone player.

Burnt it with the new and older disc burner and the verbatim datalife discs. Both worked now. Never had this issue before.

Thanks for your help!

 

Link to comment
Share on other sites

So, TMpegEnc was making the ISO itself?  And you were using ImgBurn to burn the ISO?  Instead of using Build mode to import a BDMV or whatever it's called folder?  Then, if that's the case, TMpegEnc wasn't making correct ISO settings for BD Video.

Link to comment
Share on other sites

11 hours ago, dbminter said:

So, TMpegEnc was making the ISO itself?  And you were using ImgBurn to burn the ISO?  Instead of using Build mode to import a BDMV or whatever it's called folder?  Then, if that's the case, TMpegEnc wasn't making correct ISO settings for BD Video.

Yes, tmpgenc can make the iso. In this case it made the BDMV folder. Strange is I made also a dvd iso from that same blu ray project with downconversion. With this method I don't have to make a new menu. Maybe my bitrate voor blu ray was set too high. 

Link to comment
Share on other sites

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.