Jump to content

Very Slow Verify Speed


Maziar

Recommended Posts

Hi

i use asus 24D5MT drive and some times i have very slow verify speed after burn , Start from 2x and max to 5x  ( not always)

can u tell me why is that ?

 

I 19:46:37 Operation Started!
I 19:46:37 Source File: D:\Series\Breaking Bad - 1080p\Images\2-1.nrg
I 19:46:37 Source File Sectors: 1,951,360 (MODE1/2048)
I 19:46:37 Source File Size: 3,996,385,280 bytes
I 19:46:37 Source File Volume Identifier: Breaking Bad-S2
I 19:46:37 Source File Volume Set Identifier: 50496436AFB69BC9
I 19:46:37 Source File Implementation Identifier: Nero
I 19:46:37 Source File File System(s): UDF (1.02)
I 19:46:37 Destination Device: [1:0:0] ASUS DRW-24D5MT 2.00 (H:) (ATA)
I 19:46:37 Destination Media Type: DVD-R (Disc ID: CMC MAG. AM3)
I 19:46:37 Destination Media Supported Write Speeds: 8x, 16x
I 19:46:37 Destination Media Sectors: 2,298,496
I 19:46:37 Write Mode: DVD
I 19:46:37 Write Type: DAO
I 19:46:37 Write Speed: 8x
I 19:46:37 Link Size: Auto
I 19:46:37 Lock Volume: Yes
I 19:46:37 Test Mode: No
I 19:46:37 OPC: No
I 19:46:37 BURN-Proof: Enabled
I 19:46:37 Write Speed Successfully Set! - Effective: 11,080 KB/s (8x)
I 19:46:37 Filling Buffer... (80 MiB)
I 19:46:38 Writing LeadIn...
I 19:47:07 Writing Session 1 of 1... (1 Track, LBA: 0 - 1951359)
I 19:47:07 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 1951359)
I 19:54:41 Synchronising Cache...
I 19:54:52 Exporting Graph Data...
I 19:54:52 Graph Data File: C:\Users\Maziar\AppData\Roaming\ImgBurn\Graph Data Files\ASUS_DRW-24D5MT_2.00_SUNDAY-FEBRUARY-16-2020_7-46_PM_CMC_MAG._AM3_8x.ibg
I 19:54:52 Export Successfully Completed!
I 19:54:52 Operation Successfully Completed! - Duration: 00:08:15
I 19:54:52 Average Write Rate: 8,615 KiB/s (6.4x) - Maximum Write Rate: 10,991 KiB/s (8.1x)
I 19:54:52 Cycling Tray before Verify...
W 19:55:03 Waiting for device to become ready...
I 19:55:13 Device Ready!
I 19:55:18 Operation Started!
I 19:55:18 Source Device: [1:0:0] ASUS DRW-24D5MT 2.00 (H:) (ATA)
I 19:55:18 Source Media Type: DVD-R (Book Type: DVD-R) (Disc ID: CMC MAG. AM3)
I 19:55:18 Source Media Supported Read Speeds: 1x, 2x, 4x, 6x, 8x, 10x, 12x, 14x, 16x
I 19:55:18 Source Media Supported Write Speeds: 8x, 16x
I 19:55:18 Source Media Sectors: 1,951,360 (Track Path: PTP)
I 19:55:18 Source Media Size: 3,996,385,280 bytes
I 19:55:18 Image File: D:\Series\Breaking Bad - 1080p\Images\2-1.nrg
I 19:55:18 Image File Sectors: 1,951,360 (MODE1/2048)
I 19:55:18 Image File Size: 3,996,385,280 bytes
I 19:55:18 Image File Volume Identifier: Breaking Bad-S2
I 19:55:18 Image File Volume Set Identifier: 50496436AFB69BC9
I 19:55:19 Image File Implementation Identifier: Nero
I 19:55:19 Image File File System(s): UDF (1.02)
I 19:55:19 Read Speed (Data/Audio): MAX / MAX
I 19:55:20 Read Speed - Effective: 6.7x - 16x
I 19:55:20 Verifying Session 1 of 1... (1 Track, LBA: 0 - 1951359)
I 19:55:20 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 1951359)
I 20:07:07 Exporting Graph Data...
I 20:07:07 Graph Data File: C:\Users\Maziar\AppData\Roaming\ImgBurn\Graph Data Files\ASUS_DRW-24D5MT_2.00_SUNDAY-FEBRUARY-16-2020_7-46_PM_CMC_MAG._AM3_8x.ibg
I 20:07:07 Export Successfully Completed!
I 20:07:07 Operation Successfully Completed! - Duration: 00:11:42
I 20:07:07 Average Verify Rate: 5,567 KiB/s (4.1x) - Maximum Verify Rate: 11,828 KiB/s (8.7x)
 

 

Link to comment
Share on other sites

Read speeds are set by the firmware of a drive and the read rate descriptor on the media.  You may have a conflict between these two.  The only fix is to update the firmware or use different discs.  Try seeing if there's a firmware update for your drive.  In Write mode, right click on the Destination drive letter line from the drop down list and choose the last option, Check for firmware update.  Otherwise, you may want to try different discs.  And, honestly, you should be using different discs besides CMC's.  CMC media is the bottom of the barrel worst media out there.  Try Verbatim DataLife Plus (NOT Life Series.) you can only find online.  I can't guarantee you'll resolve your very slow Verify rate, but your discs will generally last much longer.

Link to comment
Share on other sites

7 hours ago, dbminter said:

Read speeds are set by the firmware of a drive and the read rate descriptor on the media.  You may have a conflict between these two.  The only fix is to update the firmware or use different discs.  Try seeing if there's a firmware update for your drive.  In Write mode, right click on the Destination drive letter line from the drop down list and choose the last option, Check for firmware update.  Otherwise, you may want to try different discs.  And, honestly, you should be using different discs besides CMC's.  CMC media is the bottom of the barrel worst media out there.  Try Verbatim DataLife Plus (NOT Life Series.) you can only find online.  I can't guarantee you'll resolve your very slow Verify rate, but your discs will generally last much longer.

Tnq for answer ,

actually my previous Drive (LiteOn) didn have this problem with same discs , i think its about this drive Firmware. ( any way for customize firmware ?  )

unfortunately i live in Iran so cant access to international online market like amazon and have to use worst media in the world ( this media known here as AA grade quality :/ )

i have 2 other newbie question ,

1. is there necessary to wait beetwen burning discs (like 10-15 disc continuous) for cooldown the laser ? 

2. any way to burn file/data directly to discs with queue ?  i found queue burning for img files only so i have to convert(build) my files to img before use that feature


 
Link to comment
Share on other sites

As for #1, I don't really know if it's necessary or not.  Couldn't hurt, though I don't think it's necessary.

 

I don't understand what you're asking with #2.  Are you asking is there a way to burn data to a disc without having to write to an image file first?  If that's what you're asking, yes, there is.  Under Mode, use the EZ Mode Picker.  Then use Write files/folders to disc.  It uses a similar interface to creating an image file from files, but instead of creating an ISO, it burns directly to disc.

 

Link to comment
Share on other sites

1 hour ago, dbminter said:

As for #1, I don't really know if it's necessary or not.  Couldn't hurt, though I don't think it's necessary.

 

I don't understand what you're asking with #2.  Are you asking is there a way to burn data to a disc without having to write to an image file first?  If that's what you're asking, yes, there is.  Under Mode, use the EZ Mode Picker.  Then use Write files/folders to disc.  It uses a similar interface to creating an image file from files, but instead of creating an ISO, it burns directly to disc.

 

yes i want to write files/folders directly to disc with queue , so schadule several discs for burn and just change the disc

only found that option ( queue writing) for image burn right now

Link to comment
Share on other sites

Oh, if that's what you wanted, then I think the only solution is to queue image files and burn the queue.  The EZ Mode Picker option I mentioned, I think, only burns one task at a time.  I don't think you can queue up anything in that.  I've only used that option once I can think of, and that was a troubleshooting test.

Link to comment
Share on other sites

I thought there was an option to queue image files.  As long as you changed the name of the image file each time, it would queue up the entire list and then burn each one one after the other.

 

In Build mode, under Options tab next to Information, make sure Add to write queue when done is checked.  As long as you change the target image file name each time, each time you build a new image, it should queue them all in order or creation.

Link to comment
Share on other sites

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.