Jump to content

Burning CCD Image burning error


suuhm

Recommended Posts

HI, i've got an error with burning an ccd image. It looks similar to his one like here:

 

Logfile:

 

; //****************************************\\
;   ImgBurn Version 2.5.8.0 - Log
;   Dienstag, 28 April 2020, 13:52:14
; \\****************************************//
;
;
I 13:49:23 ImgBurn Version 2.5.8.0 started!
I 13:49:23 Microsoft Windows 8 Professional x64 Edition (6.2, Build 9200)
I 13:49:23 Total Physical Memory: 16.712.640 KiB  -  Available: 9.488.056 KiB
I 13:49:23 Initialising SPTI...
I 13:49:23 Searching for SCSI / ATAPI devices...
I 13:49:24 -> Drive 1 - Info: HL-DT-ST DVD-RAM GH40L LA00-02 (M:) (SATA)
I 13:49:24 Found 1 DVD±RW/RAM!
I 13:49:36 Operation Started!
I 13:49:36 Device: [0:0:0] HL-DT-ST DVD-RAM GH40L LA00 (M:) (SATA)
I 13:49:36 Media Type: CD-RW (Disc ID: 97m26s65f, CMC Magnetics Corp.)
I 13:49:36 Media Supported Write Speeds: 10x
I 13:49:36 Quick Erase: Yes
I 13:49:36 Erasing Disc...
I 13:49:59 Operation Successfully Completed! - Duration: 00:00:23
I 13:49:59 Operation Started!
I 13:49:59 Source File: K:\DC\DC-IMAGE.ccd
I 13:49:59 Source File Sectors: 0 (AUDIO/2352)
I 13:49:59 Source File Size: 0 bytes
I 13:49:59 Source File File System(s): None
I 13:49:59 Destination Device: [0:0:0] HL-DT-ST DVD-RAM GH40L LA00 (M:) (SATA)
I 13:49:59 Destination Media Type: CD-RW (Disc ID: 97m26s65f, CMC Magnetics Corp.)
I 13:49:59 Destination Media Supported Write Speeds: 10x
I 13:49:59 Destination Media Sectors: 359.847
I 13:49:59 Write Mode: CD
I 13:49:59 Write Type: SAO
I 13:49:59 Write Speed: 8x
I 13:49:59 Lock Volume: Yes
I 13:49:59 Test Mode: No
I 13:49:59 OPC: No
I 13:49:59 BURN-Proof: Enabled
W 13:50:00 Write Speed Miscompare! - Wanted: 1.411 KB/s (8x), Got: 1.764 KB/s (10x)
W 13:50:00 The drive only supports writing these discs at 10x.
W 13:50:00 Write Type: TAO
I 13:50:01 Filling Buffer... (80 MiB)
I 13:50:01 Writing LeadIn...
I 13:50:01 Synchronising Cache...
I 13:50:02 Closing Track...
I 13:50:03 Synchronising Cache...
I 13:50:04 Closing Track...
W 13:50:04 Close Track Failed! - Reason: Invalid Field in CDB
W 13:50:04 Retrying (1 of 3)...
W 13:50:04 Retry Failed - Reason: Invalid Field in CDB
W 13:50:04 Retrying (2 of 3)...
W 13:50:04 Retry Failed - Reason: Invalid Field in CDB
W 13:50:04 Retrying (3 of 3)...
W 13:50:04 Retry Failed - Reason: Invalid Field in CDB
W 13:50:19 Retrying (4)...
W 13:50:19 Retry Failed - Reason: Invalid Field in CDB
I 13:50:21 Synchronising Cache...
I 13:50:22 Closing Track...
W 13:50:22 Close Track Failed! - Reason: Invalid Field in CDB
W 13:50:22 Retrying (1 of 3)...
W 13:50:22 Retry Failed - Reason: Invalid Field in CDB
W 13:50:22 Retrying (2 of 3)...
W 13:50:22 Retry Failed - Reason: Invalid Field in CDB
W 13:50:22 Retrying (3 of 3)...
W 13:50:22 Retry Failed - Reason: Invalid Field in CDB
E 13:50:44 Close Track Failed! - Reason: Invalid Field in CDB
I 13:50:44 Closing Track (Last Attempt!)...
E 13:50:44 Close Track Failed! - Reason: Invalid Field in CDB
I 13:50:44 Synchronising Cache...
I 13:50:56 Closing Track...
I 13:50:57 Closing Session...
E 13:50:58 Failed to Write Image!
E 13:50:58 Operation Failed! - Duration: 00:00:58
I 13:50:58 Average Write Rate: N/A - Maximum Write Rate: N/A
I 13:52:13 Close Request Acknowledged
I 13:52:13 Closing Down...
I 13:52:14 Shutting down SPTI...
I 13:52:14 ImgBurn closed!

Thanks :)

Edited by suuhm
Link to comment
Share on other sites

Try not using cheap media.  Here's your most likely culprit:

 

I 13:49:59 Destination Media Type: CD-RW (Disc ID: 97m26s65f, CMC Magnetics Corp.)

 

CMC Magnetics makes the worst discs out there.  Try something from Verbatim that is DataLife Plus, not the Life Series you find in stores.  You can only find the DataLife Plus series online.

 

You may also want to check about your CD-RW.  Have you used it before?  If so, how many times?  It may have just reached the end of its life span.

 

Link to comment
Share on other sites

2 minutes ago, dbminter said:

Try not using cheap media.  Here's your most likely culprit:

 


I 13:49:59 Destination Media Type: CD-RW (Disc ID: 97m26s65f, CMC Magnetics Corp.)

 

CMC Magnetics makes the worst discs out there.  Try something from Verbatim that is DataLife Plus, not the Life Series you find in stores.  You can only find the DataLife Plus series online.

Hi, i'm using also CD-R from Memorex, so there are no problems with that "dest, media error"

2 minutes ago, dbminter said:

 

You may also want to check about your CD-RW.  Have you used it before?  If so, how many times?  It may have just reached the end of its life span.

 

I've just write it 2 times yet, so i dont think its end of life.

 

There seems to be a problem with the CCD image scanning.

Like: filesys: unknown / None, Sector / Size: 0 etc.

Link to comment
Share on other sites

CD-R from Memorex is also known to use CMC Magnetics discs but is also known to use the good stuff from MCC.  You'd have to check one of these Memorex discs in ImgBurn to see if you've got "good" Memorex from MCC or the bad stuff from CMC.  (Notice how CMC just rearranges the letters of a known good manufacturer to try and trick people?)

Link to comment
Share on other sites

Ohh okay doesen't know that there is any difference.

Okay, my memorex disks seems to be CMC, but what does it mean? What do you mean with "good stuff" Is it really a problem?

I can burn successfull other images without any problems

Link to comment
Share on other sites

CMC Magnetics is the bad stuff.  Over half the issues we see on this board are caused by using CMC media.  When people switch away from CMC, their problems generally disappear.  Not always, but usually.  MCC is Mitsubishi Chemical Corporation which makes the good stuff for Memorex and Verbatim.  CMC Magnetics/MCC means that CMC/MCC actually made the discs, not the label slapped on the package.  There are very few actual manufacturers of optical media, but many companies sell their products under their brand name.  Verbatim/MCC, Ritek, CMC, Taiyo Yuden are basically the big names in the business.  But only the stuff made MCC (only the good Verbatim) and Taiyo Yuden are quality media.

 

When you say you can burn all other images, what images are you burning and to what media?  Are you using the same CD-RW to burn all CD images to?  There are differences between CD and DVD manufacturing processes and also in how they're burned.  Now, if you've successfully burned other CD images to this same CD-RW without a problem, then you could be more confident in saying it's a problem with the CCD image itself.

 

I'm not too familiar with CCD, which I believe means CloneCD made the image.  I haven't used CloneCD in like 15 or 20 years so I know little about it.

Link to comment
Share on other sites

Ah okay, first thanks for the explanation in this media stuff thing :)

But I don't think this is the problem here.The CCD is the only image type i cannot burn. Other images are functionally in burning on the CD-RW

I think there is a problem with the read-out of the metadata in the CCD file or something else.

LIGHTNING UK! writes about a fix in the above pinned thread. Maybe he can help here?

 

 

Link to comment
Share on other sites

On 4/28/2020 at 6:21 PM, dbminter said:

CMC Magnetics is the bad stuff.  Over half the issues we see on this board are caused by using CMC media.  When people switch away from CMC, their problems generally disappear.  Not always, but usually.  MCC is Mitsubishi Chemical Corporation which makes the good stuff for Memorex and Verbatim.  CMC Magnetics/MCC means that CMC/MCC actually made the discs, not the label slapped on the package.  There are very few actual manufacturers of optical media, but many companies sell their products under their brand name.  Verbatim/MCC, Ritek, CMC, Taiyo Yuden are basically the big names in the business.  But only the stuff made MCC (only the good Verbatim) and Taiyo Yuden are quality media.

Hey, quick update here: Im now using Verbatim (Prodisc Technology Inc.) CD-R but the same problem: I read somewhere in the web that these CD manufacturers are better..

I think it's the ccd read function in imgburn which isn't able to verify the tracks

Link to comment
Share on other sites

Prodisc?  Not sure if I've ever heard of them, but I thought Prodisc was a cheap manufacturer years ago.  Probably not the real good stuff Verbatim then.  Post a log of one of these Prodisc burns so I can see what the Disc ID is.  If they are Mitsubishi Chemical Corporation Disc ID, then the problem you can probably nail down to the CCD image you have.  It's either bad or ImgBurn has a problem with CloneCD's image format.

 

What is the origin of this CCD file set?  Did you create it yourself or did you download it from somewhere?  If you downloaded it from somewhere, the likelihood is higher that the image itself is corrupt.

Link to comment
Share on other sites

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.