Jump to content

Burn Errors with Verbatim BD-RE XL Discs


Kleobis

Recommended Posts

I have read a ton about how burning with dual layer discs are problematic due to cheap discs, but I am using the ones that are suggested, Verbatim and I am still getting errors.  I will tell you what I have done and below you will see my log and hopefully you can make a suggestion as to how to fix my issue.  I started burning with LG WH14NS40 and any time I burned to a single layer disc I never had a problem.  Then I started burning DL and I started to get errors so I did some research and found that if you went to task manager and set the priority for imgburn to "real time" the errors for DL discs would go away.  This worked great for a while as errors were few and far between.  Then I bought two 25 pack spindles and almost every one of them has resulted in a burn error.  During that time, I bought two new burners a LG WH16NS60 and a ASUS BW-16D1HT and I tried these drives on another computer and I am still getting errors.  After I went through those two spindle packs I though I would try another one before I gave up.  The first disc burned fine and the next couple have all had errors.  At this point I am tired of throwing money away and hopefully there is something simple that I am missing that I can change and get back on track. 

A couple additional things to mention after including my log.  I am not sure why it shows that I am running windows 8 when I am actually running windows 10.  Also it says I connected with USB 2.0 when it is actually 3.0.  This is a log is from the Asus drive connected to my Surface pro with a USB 3.0 External enclosure.  It doesn't matter though as even when I ran the drive mounted internally to my desktop, I still get the same errors. Thanks in advance!

 

I 22:27:50 ImgBurn Version 2.5.8.0 started!
I 22:27:50 Microsoft Windows 8 Professional x64 Edition (6.2, Build 9200)
I 22:27:50 Total Physical Memory: 8,308,108 KiB  -  Available: 3,420,440 KiB
I 22:27:50 Initialising SPTI...
I 22:27:50 Searching for SCSI / ATAPI devices...
I 22:27:51 -> Drive 1 - Info: ASUS BW-16D1HT 3.10 (E:) (USB 2.0)
I 22:27:51 Found 1 BD-RE XL!
I 22:29:06 Operation Started!
I 22:29:06 Building Image Tree...
I 22:29:06 Calculating Totals...
I 22:29:06 Preparing Image...
I 22:29:06 Contents: 414 Files, 24 Folders
I 22:29:06 Content Type: BD Video
I 22:29:06 Data Type: MODE1/2048
I 22:29:06 File System(s): UDF (2.50)
I 22:29:06 Volume Label: [Not Configured]
I 22:29:06 Size: 45,082,855,377 bytes
I 22:29:06 Sectors: 22,013,391
I 22:29:07 Image Size: 45,086,146,560 bytes
I 22:29:07 Image Sectors: 22,014,720
I 22:29:07 Operation Successfully Completed! - Duration: 00:00:00
I 22:29:39 Operation Started!
I 22:29:39 Building Image Tree...
I 22:29:39 Calculating Totals...
I 22:29:39 Preparing Image...
I 22:29:39 Contents: 414 Files, 24 Folders
I 22:29:39 Content Type: BD Video
I 22:29:39 Data Type: MODE1/2048
I 22:29:39 File System(s): UDF (2.50)
I 22:29:39 Volume Label: Shazam!
I 22:29:40 Size: 45,082,855,377 bytes
I 22:29:40 Sectors: 22,013,391
I 22:29:40 Image Size: 45,086,146,560 bytes
I 22:29:40 Image Sectors: 22,014,720
I 22:29:42 Operation Successfully Completed! - Duration: 00:00:02
I 22:29:42 Operation Started!
I 22:29:42 Source File: -==/\/[BUILD IMAGE]\/\==-
I 22:29:42 Source File Sectors: 22,014,720 (MODE1/2048)
I 22:29:42 Source File Size: 45,086,146,560 bytes
I 22:29:42 Source File Volume Identifier: Shazam!
I 22:29:42 Source File Volume Set Identifier: 50F3B3B3014FE8EF
I 22:29:42 Source File Application Identifier: ImgBurn v2.5.8.0
I 22:29:42 Source File Implementation Identifier: ImgBurn
I 22:29:42 Source File File System(s): UDF (2.50)
I 22:29:42 Destination Device: [0:0:0] ASUS BW-16D1HT 3.10 (E:) (USB)
I 22:29:42 Destination Media Type: BD-R (Disc ID: VERBAT-IMf-000)
I 22:29:42 Destination Media Supported Write Speeds: 2x, 4x, 6x, 8x
I 22:29:42 Destination Media Sectors: 24,438,784
I 22:29:42 Write Mode: BD
I 22:29:42 Write Type: DAO
I 22:29:42 Write Speed: MAX
I 22:29:42 Hardware Defect Management Active: No
I 22:29:42 BD-R Verify Not Required: Yes
I 22:29:42 Link Size: Auto
I 22:29:42 Lock Volume: Yes
I 22:29:42 Test Mode: No
I 22:29:42 OPC: No
I 22:29:42 BURN-Proof: Enabled
I 22:29:46 Write Speed Successfully Set! - Effective: 35,968 KB/s (8x)
I 22:30:35 Filling Buffer... (80 MiB)
I 22:30:38 Writing LeadIn...
I 22:30:40 Writing Session 1 of 1... (1 Track, LBA: 0 - 22014719)
I 22:30:40 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 22014719)
I 22:30:40 Writing Layer 0... (LBA: 0 - 12219391)
I 22:43:21 Writing Layer 1... (LBA: 12219392 - 22014719)
I 22:52:58 Synchronising Cache...
I 22:53:00 Closing Track...
I 22:53:01 Finalising Disc...
I 22:53:43 Exporting Graph Data...
I 22:53:43 Graph Data File: C:\Users\mtomw\AppData\Roaming\ImgBurn\Graph Data Files\ASUS_BW-16D1HT_3.10_SUNDAY-JULY-19-2020_10-29_PM_VERBAT-IMf-000_MAX.ibg
I 22:53:43 Export Successfully Completed!
I 22:53:43 Operation Successfully Completed! - Duration: 00:24:00
I 22:53:43 Average Write Rate: 32,906 KiB/s (7.5x) - Maximum Write Rate: 35,452 KiB/s (8.1x)
I 22:53:43 Cycling Tray before Verify...
W 22:53:51 Waiting for device to become ready...
I 22:54:07 Device Ready!
I 22:54:11 Operation Started!
I 22:54:11 Source Device: [0:0:0] ASUS BW-16D1HT 3.10 (E:) (USB)
I 22:54:11 Source Media Type: BD-R (Disc ID: VERBAT-IMf-000)
I 22:54:11 Source Media Supported Read Speeds: 2x, 4x, 6x, 8x
I 22:54:11 Source Media Supported Write Speeds: 2x, 4x, 6x, 8x
I 22:54:11 Source Media Sectors: 22,014,720
I 22:54:11 Source Media Size: 45,086,146,560 bytes
I 22:54:11 Image File: -==/\/[BUILD IMAGE]\/\==-
I 22:54:11 Image File Sectors: 22,014,720 (MODE1/2048)
I 22:54:11 Image File Size: 45,086,146,560 bytes
I 22:54:11 Image File Volume Identifier: Shazam!
I 22:54:11 Image File Volume Set Identifier: 50F3B3B3014FE8EF
I 22:54:11 Image File Application Identifier: ImgBurn v2.5.8.0
I 22:54:11 Image File Implementation Identifier: ImgBurn
I 22:54:11 Image File File System(s): UDF (2.50)
I 22:54:11 Read Speed (Data/Audio): MAX / MAX
I 22:54:12 Read Speed - Effective: 3x - 8x, 8x - 3x
I 22:54:12 Verifying Session 1 of 1... (1 Track, LBA: 0 - 22014719)
I 22:54:12 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 22014719)
I 22:54:12 Verifying Layer 0... (LBA: 0 - 12219391)
W 23:10:33 Failed to Read Sectors 12186400 - 12186431 - Reason: L-EC Uncorrectable Error
W 23:10:40 Failed to Read Sector 12186400 - Reason: L-EC Uncorrectable Error
W 23:10:40 Sector 12186400 maps to File: \BDMV\STREAM\01207.m2ts
E 23:17:27 Failed to Read Sector 12186400 - Reason: L-EC Uncorrectable Error
E 23:17:27 Sector 12186400 maps to File: \BDMV\STREAM\01207.m2ts
E 23:17:27 Failed to Verify Sectors!
I 23:17:31 Exporting Graph Data...
I 23:17:31 Graph Data File: C:\Users\mtomw\AppData\Roaming\ImgBurn\Graph Data Files\ASUS_BW-16D1HT_3.10_SUNDAY-JULY-19-2020_10-29_PM_VERBAT-IMf-000_MAX.ibg
I 23:17:31 Export Successfully Completed!
E 23:17:31 Operation Failed! - Duration: 00:23:16
I 23:17:31 Average Verify Rate: 17,471 KiB/s (4.0x) - Maximum Verify Rate: 35,934 KiB/s (8.2x)

Edited by Kleobis
The first log seemed messy so I switched it out with an other.
Link to comment
Share on other sites

I tried this one from my desktop at 2x speed. Despite being a new drive, I have heard that LG drives have issues with DL disc so I will try again with my Asus drive at 2x speed and post those results as well.

I 01:42:32 ImgBurn Version 2.5.8.0 started!
I 01:42:32 Microsoft Windows 8 Professional x64 Edition (6.2, Build 9200)
I 01:42:32 Total Physical Memory: 8,334,816 KiB  -  Available: 6,165,052 KiB
I 01:42:32 Initialising SPTI...
I 01:42:32 Searching for SCSI / ATAPI devices...
I 01:42:32 -> Drive 1 - Info: HL-DT-ST BD-RE  WH16NS60 1.03 (D:) (SATA)
I 01:42:32 Found 1 BD-RE XL!
I 01:42:47 Operation Started!
I 01:42:47 Building Image Tree...
I 01:42:48 Calculating Totals...
I 01:42:48 Preparing Image...
I 01:42:48 Contents: 1,316 Files, 22 Folders
I 01:42:48 Content Type: BD Video
I 01:42:48 Data Type: MODE1/2048
I 01:42:48 File System(s): UDF (2.50)
I 01:42:48 Volume Label: [Not Configured]
I 01:42:48 Size: 45,589,028,575 bytes
I 01:42:48 Sectors: 22,261,278
I 01:42:48 Image Size: 45,597,589,504 bytes
I 01:42:48 Image Sectors: 22,264,448
I 01:42:48 Operation Successfully Completed! - Duration: 00:00:00
I 01:43:58 Operation Started!
I 01:43:58 Building Image Tree...
I 01:43:58 Calculating Totals...
I 01:43:58 Preparing Image...
I 01:43:59 Contents: 1,316 Files, 22 Folders
I 01:43:59 Content Type: BD Video
I 01:43:59 Data Type: MODE1/2048
I 01:43:59 File System(s): UDF (2.50)
I 01:43:59 Volume Label: Avengers Endgame
I 01:43:59 Size: 45,589,028,575 bytes
I 01:43:59 Sectors: 22,261,278
I 01:43:59 Image Size: 45,597,589,504 bytes
I 01:43:59 Image Sectors: 22,264,448
I 01:44:01 Operation Successfully Completed! - Duration: 00:00:03
I 01:44:01 Operation Started!
I 01:44:01 Source File: -==/\/[BUILD IMAGE]\/\==-
I 01:44:01 Source File Sectors: 22,264,448 (MODE1/2048)
I 01:44:01 Source File Size: 45,597,589,504 bytes
I 01:44:01 Source File Volume Identifier: Avengers Endgame
I 01:44:01 Source File Volume Set Identifier: 50F40D7D0153B4DE
I 01:44:01 Source File Application Identifier: ImgBurn v2.5.8.0
I 01:44:01 Source File Implementation Identifier: ImgBurn
I 01:44:01 Source File File System(s): UDF (2.50)
I 01:44:01 Destination Device: [0:0:0] HL-DT-ST BD-RE  WH16NS60 1.03 (D:) (SATA)
I 01:44:01 Destination Media Type: BD-R (Disc ID: VERBAT-IMf-000)
I 01:44:02 Destination Media Supported Write Speeds: 2x, 4x, 6x
I 01:44:02 Destination Media Sectors: 24,438,784
I 01:44:02 Write Mode: BD
I 01:44:02 Write Type: DAO
I 01:44:02 Write Speed: 2x
I 01:44:02 Hardware Defect Management Active: No
I 01:44:02 BD-R Verify Not Required: Yes
I 01:44:02 Link Size: Auto
I 01:44:02 Lock Volume: Yes
I 01:44:02 Test Mode: No
I 01:44:02 OPC: No
I 01:44:02 BURN-Proof: Enabled
I 01:44:04 Write Speed Successfully Set! - Effective: 8,992 KB/s (2x)
I 01:44:38 Filling Buffer... (72 MiB)
I 01:44:43 Writing LeadIn...
I 01:44:50 Writing Session 1 of 1... (1 Track, LBA: 0 - 22264447)
I 01:44:50 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 22264447)
I 01:44:50 Writing Layer 0... (LBA: 0 - 12219391)
I 02:29:52 Writing Layer 1... (LBA: 12219392 - 22264447)
I 03:06:55 Synchronising Cache...
I 03:06:57 Closing Track...
I 03:06:58 Finalising Disc...
I 03:07:39 Exporting Graph Data...
I 03:07:39 Graph Data File: C:\Users\Parents\AppData\Roaming\ImgBurn\Graph Data Files\HL-DT-ST_BD-RE_WH16NS60_1.03_MONDAY-JULY-20-2020_1-44_AM_VERBAT-IMf-000_2x.ibg
I 03:07:39 Export Successfully Completed!
I 03:07:39 Operation Successfully Completed! - Duration: 01:23:37
I 03:07:39 Average Write Rate: 9,041 KiB/s (2.1x) - Maximum Write Rate: 9,184 KiB/s (2.1x)
I 03:07:39 Cycling Tray before Verify...
W 03:07:46 Waiting for device to become ready...
I 03:08:02 Device Ready!
I 03:08:06 Operation Started!
I 03:08:06 Source Device: [0:0:0] HL-DT-ST BD-RE  WH16NS60 1.03 (D:) (SATA)
I 03:08:06 Source Media Type: BD-R (Disc ID: VERBAT-IMf-000)
I 03:08:06 Source Media Supported Read Speeds: 2x, 4x, 6x, 8x
I 03:08:06 Source Media Supported Write Speeds: 2x, 4x, 6x
I 03:08:06 Source Media Sectors: 22,264,448
I 03:08:06 Source Media Size: 45,597,589,504 bytes
I 03:08:06 Image File: -==/\/[BUILD IMAGE]\/\==-
I 03:08:06 Image File Sectors: 22,264,448 (MODE1/2048)
I 03:08:06 Image File Size: 45,597,589,504 bytes
I 03:08:06 Image File Volume Identifier: Avengers Endgame
I 03:08:06 Image File Volume Set Identifier: 50F40D7D0153B4DE
I 03:08:06 Image File Application Identifier: ImgBurn v2.5.8.0
I 03:08:06 Image File Implementation Identifier: ImgBurn
I 03:08:06 Image File File System(s): UDF (2.50)
I 03:08:06 Read Speed (Data/Audio): MAX / MAX
I 03:08:08 Read Speed - Effective: 3x - 8x, 8x - 3x
I 03:08:08 Verifying Session 1 of 1... (1 Track, LBA: 0 - 22264447)
I 03:08:08 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 22264447)
I 03:08:08 Verifying Layer 0... (LBA: 0 - 12219391)
W 07:46:18 Miscompare at LBA: 2444704, Offset: 0, File: \BDMV\STREAM\00801.m2ts
W 07:46:18 Device: 0x00 (Empty Sector!)
W 07:46:18 Image File: 0x19
W 07:46:18 Total Errors in Sector: 2,044
I 07:46:18 Verifying Sectors...
W 07:46:20 Miscompare at LBA: 2444705, Offset: 0, File: \BDMV\STREAM\00801.m2ts
W 07:46:20 Device: 0x00 (Empty Sector!)
W 07:46:20 Image File: 0x2D
W 07:46:20 Total Errors in Sector: 2,041
I 07:46:20 Verifying Sectors...
E 07:46:22 Miscompare at LBA: 2444706, Offset: 0, File: \BDMV\STREAM\00801.m2ts
E 07:46:22 Device: 0x00 (Empty Sector!)
E 07:46:22 Image File: 0xC7
E 07:46:22 Total Errors in Sector: 2,042
E 07:46:22 Failed to Verify Sectors!
I 07:46:26 Exporting Graph Data...
I 07:46:26 Graph Data File: C:\Users\Parents\AppData\Roaming\ImgBurn\Graph Data Files\HL-DT-ST_BD-RE_WH16NS60_1.03_MONDAY-JULY-20-2020_1-44_AM_VERBAT-IMf-000_2x.ibg
I 07:46:26 Export Successfully Completed!
E 07:46:26 Operation Failed! - Duration: 04:38:15
I 07:46:26 Average Verify Rate: 292 KiB/s (0.1x) - Maximum Verify Rate: 20,837 KiB/s (4.7x)
 

Link to comment
Share on other sites

It's interesting you're getting failures with DL BD media on the WH16NS60.  The NS40 definitely doesn't properly write DL BD media.  Failing 9 times out of 10.  Which is why I tried the NS60.  While I've never written a DL BD-R in it, BD-RE DL burned in all tests I threw at it.  So, I can't explain why it's failing on the NS60.

 

As for the ASUS model, I never actually got writing BD-R media, let alone DL, before I determined it was junk.  Doesn't properly write to rewritable media.  DESTROYS DVD+RW and BD-RE media on writing to them.  :o 

 

Since you're tried different computers with the same drive media, the problem must be the drive or the media.  And since you've tried different burners and different unique copies of burners, the problem does appear to be with the media.

Link to comment
Share on other sites

2 hours ago, dbminter said:

It's interesting you're getting failures with DL BD media on the WH16NS60.  The NS40 definitely doesn't properly write DL BD media.  Failing 9 times out of 10.  Which is why I tried the NS60.  While I've never written a DL BD-R in it, BD-RE DL burned in all tests I threw at it.  So, I can't explain why it's failing on the NS60.

 

As for the ASUS model, I never actually got writing BD-R media, let alone DL, before I determined it was junk.  Doesn't properly write to rewritable media.  DESTROYS DVD+RW and BD-RE media on writing to them.  :o 

 

Since you're tried different computers with the same drive media, the problem must be the drive or the media.  And since you've tried different burners and different unique copies of burners, the problem does appear to be with the media.

I am at a loss, I tried so many different variations and still end up with errors.  What is the most recommended drive and media to burn with?

Link to comment
Share on other sites

11 hours ago, LIGHTNING UK! said:

Have you only ever burnt them at 'MAX' (8x) speed?

Maybe your drive(s) would do a better job at one of the slower speeds they claim to support those discs at.

 

you can see my post after your comment, but I tried with my other computer and drive.  So I thought I would go back to the Asus drive on my surface and try burning at 2x speed.  below are my results. Any thoughts?


I 09:11:38 ImgBurn Version 2.5.8.0 started!
I 09:11:38 Microsoft Windows 8 Professional x64 Edition (6.2, Build 9200)
I 09:11:38 Total Physical Memory: 8,308,108 KiB  -  Available: 4,246,488 KiB
I 09:11:38 Initialising SPTI...
I 09:11:38 Searching for SCSI / ATAPI devices...
I 09:11:39 -> Drive 1 - Info: ASUS BW-16D1HT 3.10 (E:) (USB 2.0)
I 09:11:39 Found 1 BD-RE XL!
I 09:12:20 Operation Started!
I 09:12:20 Building Image Tree...
I 09:12:20 Calculating Totals...
I 09:12:20 Preparing Image...
I 09:12:20 Contents: 1,316 Files, 22 Folders
I 09:12:20 Content Type: BD Video
I 09:12:20 Data Type: MODE1/2048
I 09:12:20 File System(s): UDF (2.50)
I 09:12:20 Volume Label: [Not Configured]
I 09:12:20 Size: 45,589,028,575 bytes
I 09:12:20 Sectors: 22,261,278
I 09:12:20 Image Size: 45,597,589,504 bytes
I 09:12:20 Image Sectors: 22,264,448
I 09:12:20 Operation Successfully Completed! - Duration: 00:00:00
I 09:13:02 Operation Started!
I 09:13:02 Building Image Tree...
I 09:13:02 Calculating Totals...
I 09:13:02 Preparing Image...
I 09:13:03 Contents: 1,316 Files, 22 Folders
I 09:13:03 Content Type: BD Video
I 09:13:03 Data Type: MODE1/2048
I 09:13:03 File System(s): UDF (2.50)
I 09:13:03 Volume Label: Avengers Endgame
I 09:13:03 Size: 45,589,028,575 bytes
I 09:13:03 Sectors: 22,261,278
I 09:13:03 Image Size: 45,597,589,504 bytes
I 09:13:03 Image Sectors: 22,264,448
I 09:13:04 Operation Successfully Completed! - Duration: 00:00:02
I 09:13:04 Operation Started!
I 09:13:04 Source File: -==/\/[BUILD IMAGE]\/\==-
I 09:13:04 Source File Sectors: 22,264,448 (MODE1/2048)
I 09:13:04 Source File Size: 45,597,589,504 bytes
I 09:13:04 Source File Volume Identifier: Avengers Endgame
I 09:13:04 Source File Volume Set Identifier: 50F449A10153B4DE
I 09:13:04 Source File Application Identifier: ImgBurn v2.5.8.0
I 09:13:04 Source File Implementation Identifier: ImgBurn
I 09:13:04 Source File File System(s): UDF (2.50)
I 09:13:04 Destination Device: [0:0:0] ASUS BW-16D1HT 3.10 (E:) (USB)
I 09:13:04 Destination Media Type: BD-R (Disc ID: VERBAT-IMf-000)
I 09:13:04 Destination Media Supported Write Speeds: 2x, 4x, 6x, 8x
I 09:13:04 Destination Media Sectors: 24,438,784
I 09:13:04 Write Mode: BD
I 09:13:04 Write Type: DAO
I 09:13:04 Write Speed: 2x
I 09:13:04 Hardware Defect Management Active: No
I 09:13:04 BD-R Verify Not Required: Yes
I 09:13:04 Link Size: Auto
I 09:13:04 Lock Volume: Yes
I 09:13:04 Test Mode: No
I 09:13:04 OPC: No
I 09:13:04 BURN-Proof: Enabled
I 09:13:07 Write Speed Successfully Set! - Effective: 8,992 KB/s (2x)
I 09:13:39 Filling Buffer... (80 MiB)
I 09:13:41 Writing LeadIn...
I 09:13:42 Writing Session 1 of 1... (1 Track, LBA: 0 - 22264447)
I 09:13:42 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 22264447)
I 09:13:42 Writing Layer 0... (LBA: 0 - 12219391)
I 09:58:44 Writing Layer 1... (LBA: 12219392 - 22264447)
I 10:35:48 Synchronising Cache...
W 10:36:03 Potential 'WaitImmediateIO' Deferred Error - (0/3) - Session Fixation Error
W 10:36:03 Synchronise Cache Failed! - Reason: Session Fixation Error
W 10:36:03 Retrying (1 of 3)...
I 10:36:04 Closing Track...
I 10:36:05 Finalising Disc...
I 10:36:49 Exporting Graph Data...
I 10:36:49 Graph Data File: C:\Users\mtomw\AppData\Roaming\ImgBurn\Graph Data Files\ASUS_BW-16D1HT_3.10_MONDAY-JULY-20-2020_9-13_AM_VERBAT-IMf-000_2x.ibg
I 10:36:49 Export Successfully Completed!
I 10:36:49 Operation Successfully Completed! - Duration: 01:23:44
I 10:36:49 Average Write Rate: 9,041 KiB/s (2.1x) - Maximum Write Rate: 9,179 KiB/s (2.1x)
I 10:36:49 Cycling Tray before Verify...
W 10:37:01 Waiting for device to become ready...
I 10:37:15 Device Ready!
I 10:37:19 Operation Started!
I 10:37:19 Source Device: [0:0:0] ASUS BW-16D1HT 3.10 (E:) (USB)
I 10:37:19 Source Media Type: BD-R (Disc ID: VERBAT-IMf-000)
I 10:37:19 Source Media Supported Read Speeds: 2x, 4x, 6x, 8x
I 10:37:19 Source Media Supported Write Speeds: 2x, 4x, 6x, 8x
I 10:37:19 Source Media Sectors: 22,264,448
I 10:37:19 Source Media Size: 45,597,589,504 bytes
I 10:37:19 Image File: -==/\/[BUILD IMAGE]\/\==-
I 10:37:19 Image File Sectors: 22,264,448 (MODE1/2048)
I 10:37:19 Image File Size: 45,597,589,504 bytes
I 10:37:19 Image File Volume Identifier: Avengers Endgame
I 10:37:19 Image File Volume Set Identifier: 50F449A10153B4DE
I 10:37:19 Image File Application Identifier: ImgBurn v2.5.8.0
I 10:37:19 Image File Implementation Identifier: ImgBurn
I 10:37:19 Image File File System(s): UDF (2.50)
I 10:37:19 Read Speed (Data/Audio): MAX / MAX
I 10:37:20 Read Speed - Effective: 3x - 8x, 8x - 3x
I 10:37:20 Verifying Session 1 of 1... (1 Track, LBA: 0 - 22264447)
I 10:37:20 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 22264447)
I 10:37:20 Verifying Layer 0... (LBA: 0 - 12219391)
W 10:53:50 Failed to Read Sectors 12145728 - 12145759 - Reason: L-EC Uncorrectable Error
W 10:53:57 Failed to Read Sector 12145728 - Reason: L-EC Uncorrectable Error
W 10:53:57 Sector 12145728 maps to File: \BDMV\STREAM\00801.m2ts
W 10:54:37 Retrying (1)...
W 10:54:45 Retry Failed - Reason: L-EC Uncorrectable Error
E 10:55:14 Failed to Read Sector 12145728 - Reason: L-EC Uncorrectable Error
E 10:55:14 Sector 12145728 maps to File: \BDMV\STREAM\00801.m2ts
E 10:55:14 Failed to Verify Sectors!
I 10:55:15 Exporting Graph Data...
I 10:55:15 Graph Data File: C:\Users\mtomw\AppData\Roaming\ImgBurn\Graph Data Files\ASUS_BW-16D1HT_3.10_MONDAY-JULY-20-2020_9-13_AM_VERBAT-IMf-000_2x.ibg
I 10:55:15 Export Successfully Completed!
E 10:55:15 Operation Failed! - Duration: 00:17:54
I 10:55:15 Average Verify Rate: 22,638 KiB/s (5.2x) - Maximum Verify Rate: 35,817 KiB/s (8.2x)
I 10:57:11 Operation Started!
I 10:57:11 Building Image Tree...
I 10:57:11 Calculating Totals...
I 10:57:11 Preparing Image...
I 10:57:11 Contents: 1,316 Files, 22 Folders
I 10:57:11 Content Type: BD Video
I 10:57:11 Data Type: MODE1/2048
I 10:57:11 File System(s): UDF (2.50)
I 10:57:11 Volume Label: Avengers Endgame
I 10:57:11 Size: 45,589,028,575 bytes
I 10:57:11 Sectors: 22,261,278
I 10:57:11 Image Size: 45,597,589,504 bytes
I 10:57:11 Image Sectors: 22,264,448
I 10:57:11 Operation Successfully Completed! - Duration: 00:00:00
I 10:57:37 Close Request Acknowledged
I 10:57:37 Closing Down...
I 10:57:37 Shutting down SPTI...
I 10:57:37 ImgBurn closed!

Link to comment
Share on other sites

Unfortunately, my best recommendation for a BD burner is the LG WH16NS60, which you've already tried.   It's the drive with the FEWEST problems out of all the available options out there.  I've never burned BD-R DL, only BD-RE DL, in it, so I can't recommend any BD-R DL.

 

You've tried these drives in different computers, so you know it's not the PC being the problem.  I noticed you're using a USB drive.  Did you try using a different USB cable?  The drives you mentioned are internal models, if I remember correctly, like the WH16NS60 and NS40, so you must be using an external enclosure.  What model is it?  You could try using a different one.  I use VanTech, but the first one I got was junk and the 2nd one I'm still using, so you have to be sure it works properly when you get it.  Since you've tried different drives on different machines, the USB cable could be a common culprit.  As could be the enclosure you're using as I doubt you've tried different ones?  Other than that, the problem would be the media, which, given CMC, the junk maker, bought out Verbatim, it's always possible CMC turned the good Verbatim stuff into their typical trash.

Link to comment
Share on other sites

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.