10slefty Posted January 1, 2021 Share Posted January 1, 2021 I downloaed a wii rom from The ROM Depot and did a burn to IMGBURN using a DVD-R and it was successfully completed (with verify on) but disc would not play in my Wii device. I have done numerous burns for my SEGA DREAMCAST using CD-R discs with IMGBURN without a hitch. I would appreciate any help/advice from members. Thanks. Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted January 1, 2021 Share Posted January 1, 2021 Can you post the log please? If it burnt and verified ok, the disc is ok so far as your burner is concerned. The issue then falls with the image itself or your playback device (being unable to read the disc or something). Link to comment Share on other sites More sharing options...
dbminter Posted January 1, 2021 Share Posted January 1, 2021 And a log will tell us if you're using quality discs or cheap discs. Cheaper discs have a higher likelihood of not being readable on some hardware. Link to comment Share on other sites More sharing options...
10slefty Posted January 2, 2021 Author Share Posted January 2, 2021 Thanks for your responses. One thing i will try is to burn a different game wii iso and see if the result is the same . Link to comment Share on other sites More sharing options...
dbminter Posted January 2, 2021 Share Posted January 2, 2021 You can probably save a disc by posting a log. Link to comment Share on other sites More sharing options...
ranshe7 Posted January 12, 2021 Share Posted January 12, 2021 Reinstall the system cleanly, remove everything from the boot disk, and then install ImgBurn and do not install anything else. The system is one program, and check the drive, only when these same errors appear again it will be possible to climb with" peace of mind " and change all sorts of system settings. Link to comment Share on other sites More sharing options...
Recommended Posts