Jump to content

Fail to burn to my very old Sony NEC Optiarc burner drive.


AntDude

Recommended Posts

I tried both CDs (had to rewriteable since I was wasting discs!) and DVDs in my very old Sony NEC Optiarc burner drive (N:). Log examples with an ISO and copy files from my HDD:

I 00:05:15 ImgBurn Version 2.5.8.0 started!
I 00:05:15 Microsoft Windows 7 Home Premium x64 Edition (6.1, Build 7601 : Service Pack 1)
I 00:05:15 Total Physical Memory: 6,282,424 KiB  -  Available: 3,829,788 KiB
W 00:05:15 Duplex Secure's SPTD driver can have a detrimental effect on drive performance.
I 00:05:15 Initialising SPTI...
I 00:05:15 Searching for SCSI / ATAPI devices...
I 00:05:16 -> Drive 1 - Info: HL-DT-ST DVDRAM GH24NS50 XP02-01 (M:) (ATA)
I 00:05:16 -> Drive 2 - Info: Optiarc DVD RW AD-7220S 1.01 (N:) (ATA)
I 00:05:16 Found 2 DVD±RW/RAMs!
I 00:06:43 Operation Started!
I 00:06:43 Device: [3:0:0] Optiarc DVD RW AD-7220S 1.01 (N:) (ATA)
I 00:06:43 Media Type: CD-RW (Disc ID: 97m34s22f, Mitsubishi Chemical Corp.)
I 00:06:43 Media Supported Write Speeds: 4x
I 00:06:43 Quick Erase: Yes
I 00:06:43 Erasing Disc...
I 00:07:34 Operation Successfully Completed! - Duration: 00:00:51
I 00:07:45 Operation Started!
I 00:07:45 Building Image Tree...
I 00:07:53 Checking Directory Depth...
I 00:07:53 Calculating Totals...
I 00:07:53 Preparing Image...
I 00:07:53 Checking Path Length...
I 00:07:53 Contents: 4 Files, 3 Folders
I 00:07:53 Content Type: Data
I 00:07:53 Data Type: MODE1/2048
I 00:07:53 File System(s): ISO9660, UDF (1.02)
I 00:07:53 Volume Label: Downloads
I 00:07:53 Size: 472,720,864 bytes
I 00:07:53 Sectors: 230,822
I 00:07:53 Image Size: 473,300,992 bytes
I 00:07:53 Image Sectors: 231,104
I 00:07:56 Operation Successfully Completed! - Duration: 00:00:10
I 00:07:56 Operation Started!
I 00:07:56 Source File: -==/\/[BUILD IMAGE]\/\==-
I 00:07:56 Source File Sectors: 231,104 (MODE1/2048)
I 00:07:56 Source File Size: 473,300,992 bytes
I 00:07:56 Source File Volume Identifier: Downloads
I 00:07:56 Source File Volume Set Identifier: 52BA00F1000386BB
I 00:07:56 Source File Application Identifier: IMGBURN V2.5.8.0 - THE ULTIMATE IMAGE BURNER!
I 00:07:56 Source File Implementation Identifier: ImgBurn
I 00:07:56 Source File File System(s): ISO9660, UDF (1.02)
I 00:07:56 Destination Device: [3:0:0] Optiarc DVD RW AD-7220S 1.01 (N:) (ATA)
I 00:07:56 Destination Media Type: CD-RW (Disc ID: 97m34s22f, Mitsubishi Chemical Corp.)
I 00:07:56 Destination Media Supported Write Speeds: 4x
I 00:07:56 Destination Media Sectors: 336,073
I 00:07:56 Write Mode: CD
I 00:07:56 Write Type: SAO
I 00:07:56 Write Speed: 1x
I 00:07:56 Lock Volume: Yes
I 00:07:56 Test Mode: Yes
I 00:07:56 OPC: No
I 00:07:56 BURN-Proof: Enabled
W 00:07:56 Write Speed Miscompare! - Wanted: 176 KB/s (1x), Got: 706 KB/s (4x) / 12,722,422 KB/s (49x)
W 00:07:56 The drive only supports writing these discs at 4x.
I 00:07:56 Filling Buffer... (80 MiB)
I 00:07:57 Writing LeadIn...
W 00:08:00 Failed to Write Sectors 480 - 511 - Reason: Write Error
W 00:08:00 Retrying (1 of 20)...
W 00:08:03 Retry Failed - Reason: Invalid Address For Write
W 00:08:07 Retrying (2 of 20)...
W 00:08:07 Retry Failed - Reason: Invalid Address For Write
W 00:08:07 Retrying (3 of 20)...
W 00:08:08 Retry Failed - Reason: Invalid Address For Write
W 00:08:08 Retrying (4 of 20)...
W 00:08:08 Retry Failed - Reason: Invalid Address For Write
W 00:08:08 Retrying (5 of 20)...
W 00:08:08 Retry Failed - Reason: Invalid Address For Write
W 00:08:08 Retrying (6 of 20)...
W 00:08:08 Retry Failed - Reason: Invalid Address For Write
W 00:08:08 Retrying (7 of 20)...
W 00:08:08 Retry Failed - Reason: Invalid Address For Write
W 00:08:08 Retrying (8 of 20)...
W 00:08:08 Retry Failed - Reason: Invalid Address For Write
W 00:08:08 Retrying (9 of 20)...
W 00:08:08 Retry Failed - Reason: Invalid Address For Write
W 00:08:08 Retrying (10 of 20)...
W 00:08:08 Retry Failed - Reason: Invalid Address For Write
W 00:08:08 Retrying (11 of 20)...
W 00:08:08 Retry Failed - Reason: Invalid Address For Write
W 00:08:08 Retrying (12 of 20)...
W 00:08:08 Retry Failed - Reason: Invalid Address For Write
W 00:08:08 Retrying (13 of 20)...
W 00:08:08 Retry Failed - Reason: Invalid Address For Write
W 00:08:08 Retrying (14 of 20)...
W 00:08:08 Retry Failed - Reason: Invalid Address For Write
W 00:08:08 Retrying (15 of 20)...
W 00:08:08 Retry Failed - Reason: Invalid Address For Write
W 00:08:08 Retrying (16 of 20)...
W 00:08:08 Retry Failed - Reason: Invalid Address For Write
W 00:08:08 Retrying (17 of 20)...
W 00:08:08 Retry Failed - Reason: Invalid Address For Write
W 00:08:08 Retrying (18 of 20)...
W 00:08:08 Retry Failed - Reason: Invalid Address For Write
W 00:08:08 Retrying (19 of 20)...
W 00:08:08 Retry Failed - Reason: Invalid Address For Write
W 00:08:08 Retrying (20 of 20)...
W 00:08:08 Retry Failed - Reason: Invalid Address For Write
E 00:08:18 Failed to Write Sectors 480 - 511 - Reason: Write Error
E 00:08:18 Next Writable Address: 4294967151
I 00:08:18 Synchronising Cache...
W 00:08:21 User opted to skip the 'Close Track/Session/Disc' functions.
I 00:08:21 Cycling Tray after Test Write...
E 00:08:25 Failed to Write Image!
E 00:08:45 Operation Failed! - Duration: 00:00:29
I 00:08:45 Average Write Rate: 0 KiB/s (0.0x) - Maximum Write Rate: 0 KiB/s (0.0x)

 

I tried resetting back to defaults, test burn, and burning at 1X in ImgBurn. My other internal SATA DVD burner drive (M:; LG HL-DT-ST DVDRAM GH24NS50), and it had no problems. No problems with other software burners (BurnAware Premium, CDBurnerXP, StarBurn, and W7's Disc Image burner). What's wrong?

 

My detailed over decade old PC setup: Intel Core i7 950 CPU (quad-core; 1st gen.), three 2 GB of Kingston HyperX T1 Series 240-Pin DDR3 SDRAM 2000 (PC3 16000) Desktop Memory Model KHX2000C9AD3T1K3/6GX DDR3 RAM (6 GB total), EVGA X58 SLI (132-BL-E758; BIOS date 5/11/2010; v6.00 PG; release number IX58SZ64) motherboard, MSI R4870-T2D512 OC Radeon HD 4870 512 MB with 2 VGA+DVI adapters (one is connected to a 21.5" Samsung SyncMaster T22B350ND HDTV, Corsair Carbide Series 300R ATX mid-tower case, two onboard RealTek Gigabit Ethernets (only use one) and onboard RealTek HD Audio, Sea Sonic S12II Bronze (520 watts) power supply unit (PSU), a Hauppauge WinTV-HVR-2250 PCIe (dual tuners), LG HL-DT-ST DVDRAM GH24NS50 burner drive, Sony NEC Optiarc DVD-RW AD-7220S SATA burner drive, two internal 3.5" SATA hard disk drives (HDDs) [Seagate ST3320620AS 320 GB and Western Digital Purple Surveillance 2 TB (6 Gbs; 50 MB cache; WDC WD20PURX-64P6ZY0)], an optical USB three buttons Microsoft mouse, Logitech Z-2300 speakers (2.1 setup and analog), and updated 64-bit Windows 7 HPE SP1 (installed on 10/22/2016).

 

Thank you for reading and hopefully answering soon. :)

Link to comment
Share on other sites

Your drive reported a 'write error'. It didn't like something about the disc... which is weird because you've told it to use 'Test Mode' and the drive isn't actually meant to be burning the disc.

I can't comment on any failures prior to that one (where you weren't using that CD-RW), as you didn't include log info for those.

Link to comment
Share on other sites

My guess is your NEC gave up the ghost.  :death:  You said it's 10 years old, which is an amazing life span for an optical disc burner.  Plus, you said your other drive was writing to the same media fine?  Which leads me to believe the Optiarc is at fault.

Link to comment
Share on other sites

1 hour ago, dbminter said:

My guess is your NEC gave up the ghost.  :death:  You said it's 10 years old, which is an amazing life span for an optical disc burner.  Plus, you said your other drive was writing to the same media fine?  Which leads me to believe the Optiarc is at fault.

Thanks. How come other disc burner softwares had no problems then? That's weird.

Link to comment
Share on other sites

Oh, I failed to see that part in your original post.  You're right, that wouldn't explain why only ImgBurn is having a problem.  It would be because there's a difference in the code in what ImgBurn does versus that other application.

 

Link to comment
Share on other sites

2 hours ago, dbminter said:

Oh, I failed to see that part in your original post.  You're right, that wouldn't explain why only ImgBurn is having a problem.  It would be because there's a difference in the code in what ImgBurn does versus that other application.

 

I wonder if there is a debug option to collect more detailed logs to see what's up. For now, I won't be using ImgBurn for this old drive and just use the other burners.

Link to comment
Share on other sites

There’s no need for more ‘debug’ info. The drive reported a write error and that’s pretty much all there is to it.

You could try enabling the ‘perform opc before write’ option, that may help your drive do its job.

As I said though, all you’ve shown us is the log from test mode on a cdrw. Where’s the log from you attempting to burn the actual discs you want to be burning (before the multiple failures prompted you to use cdrw) ?

Link to comment
Share on other sites

1 hour ago, LIGHTNING UK! said:

There’s no need for more ‘debug’ info. The drive reported a write error and that’s pretty much all there is to it.

You could try enabling the ‘perform opc before write’ option, that may help your drive do its job.

As I said though, all you’ve shown us is the log from test mode on a cdrw. Where’s the log from you attempting to burn the actual discs you want to be burning (before the multiple failures prompted you to use cdrw) ?

OK, this is getting weirder! Regular burning is fine now after three attempts with two different CD-RWs. Test mode still fails even with 'perform opc before write’ option. 

Edited by AntDude
Link to comment
Share on other sites

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.