Jump to content

Burn errors


tampabill

Recommended Posts

I am experiencing many coasters lately in burning despite consistent success previously. In the last several weeks, I had been using SONY and TDK DVD-R discs and having no luck with successful burns. I use DVD Shrink and DVD-43 to rip and shrink movies to an ISO file. Then I use IMGBURN to burn to DVD-R.

Based on your forum, I purchased Taiyo Yuden DVD-R8x media. So far, I have nothing but coasters with the first five TY discs. I have set the write rate setting to 2x in IMGBURN. Any advice on what I should be doing differently?

 

Here is the log from my last attempt...

 

I 18:43:04 ImgBurn Version 2.1.0.0 started!

I 18:43:04 Microsoft Windows XP Media Center Edition (5.1, Build 2600 : Service Pack 2)

I 18:43:05 Initialising SPTI...

I 18:43:05 Searching for SCSI / ATAPI devices...

I 18:43:24 Found 1 DVD?RW!

I 18:45:38 Operation Started!

I 18:45:38 Source File: C:\ADAPTATION.ISO

I 18:45:38 Source File Sectors: 2,201,880 (MODE1/2048)

I 18:45:38 Source File Size: 4,509,450,240 bytes

I 18:45:38 Source File Volume Identifier: ADAPTATION

I 18:45:38 Source File Implementation Identifier: DVD Shrink

I 18:45:38 Source File File System(s): ISO9660, UDF (1.02)

I 18:45:38 Destination Device: [0:0:0] HL-DT-ST DVD+-RW GWA4164B E113 (D:) (ATA)

I 18:45:38 Destination Media Type: DVD-R (Disc ID: TYG02) (Speeds: 4x)

I 18:45:38 Destination Media Sectors: 2,297,904

I 18:45:38 Write Mode: DVD

I 18:45:38 Write Type: DAO

I 18:45:38 Write Speed: 2x

I 18:45:38 Link Size: Auto

I 18:45:38 Test Mode: No

I 18:45:38 BURN-Proof: Enabled

I 18:45:38 Filling Buffer...

I 18:45:41 Writing LeadIn...

I 18:46:18 Writing Image...

W 18:54:07 Failed to Write Sectors 1123008 - 1123039 - Unknown (Vendor Unique) (0x80, 0x04)

W 18:54:07 Retrying (1 of 10)...

W 18:54:07 Retry Failed - No Seek Complete

W 18:54:07 Retrying (2 of 10)...

W 18:54:07 Retry Failed - Invalid Address For Write

W 18:54:07 Retrying (3 of 10)...

W 18:54:07 Retry Failed - Invalid Address For Write

W 18:54:07 Retrying (4 of 10)...

W 18:54:07 Retry Failed - Invalid Address For Write

W 18:54:07 Retrying (5 of 10)...

W 18:54:07 Retry Failed - Invalid Address For Write

W 18:54:07 Retrying (6 of 10)...

W 18:54:07 Retry Failed - Invalid Address For Write

W 18:54:07 Retrying (7 of 10)...

W 18:54:07 Retry Failed - Invalid Address For Write

W 18:54:07 Retrying (8 of 10)...

W 18:54:07 Retry Failed - Invalid Address For Write

W 18:54:07 Retrying (9 of 10)...

W 18:54:07 Retry Failed - Invalid Address For Write

W 18:54:07 Retrying (10 of 10)...

W 18:54:07 Retry Failed - Invalid Address For Write

E 18:57:45 Failed to Write Sectors 1123008 - 1123039 - Unknown (Vendor Unique) (0x80, 0x04)

I 18:57:45 Synchronising Cache...

E 18:57:46 Failed to Write Image!

E 18:57:46 Operation Failed! - Duration: 00:12:08

I 18:57:46 Average Write Rate: 3,274 KB/s (2.4x) - Maximum Write Rate: 5,630 KB/s (4.1x)

Link to comment
Share on other sites

setting it to 2x wont do anything for you as you can see in Destination Media the drive only sees that media as 4x. Start by looking for a newer firmware for your drive and see if it helps .The drive might just be on the way out

Link to comment
Share on other sites

I didn't know that ken ! Maybe the Verbs will fix the problem, hey tampabill how old is that drive ?

Yeah, quite surprised myself, I know volvo has the same drive and he swears by TY's, go figure. :/

 

I finally found a shop that stocks these suckers, got all excited and bought some, they were TYGO2, every time I tried to burn them at 8X, bang, instant coaster, put the settings to 4X (The only two speeds supported by my drive) and no problems.

 

I then bought some 16X Verbs, (MCC) +R media, and my drive loves them, lead in time was only 16 seconds, (against 32 seconds for the TY's) and burning speeds of 12X wasn't a problem. :thumbup:

Link to comment
Share on other sites

I then bought some 16X Verbs, (MCC) +R media, and my drive loves them, lead in time was only 16 seconds, (against 32 seconds for the TY's) and burning speeds of 12X wasn't a problem. :thumbup:

Agreed. Since finding a local distributor for Verbs a few months back, they are all I use. Single or Dual layer. They're brilliant.

Link to comment
Share on other sites

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.