Cylinder No.3 Posted September 13, 2021 Share Posted September 13, 2021 (edited) I have tried multiple times to burn Xbox 360 games on to my Double-Layer discs but to no avail. It's either stuck at Writing LeadIn or Power Calibration Area (Retry nr.# of 30). I even use Verbatim DVD+R DL 8x discs and tried to run it on Safe Mode. I personally think that my problem is with my laptop's drive, because I also hear weird and almost like clicking, scrapping or hitting noises coming from it when you first insert a disc or when it's attempting to burn. I haven't attempted yet to burn another type of disc to see if the problem isn't just with double layer DVDs yet. How can I solve my issue? W 16:23:47 Operating System has been changed! I 16:23:48 ImgBurn Version 2.5.8.0 started! I 16:23:48 Microsoft Windows 8 Professional x64 Edition (6.2, Build 9200) I 16:23:48 Total Physical Memory: 4,075,160 KiB - Available: 1,231,784 KiB I 16:23:48 Initialising SPTI... I 16:23:48 Searching for SCSI / ATAPI devices... I 16:23:49 -> Drive 1 - Info: HL-DT-ST DVDRAM GUC0N AS01-37 (F:) (SATA) I 16:23:49 Found 1 DVD±RW/RAM! W 16:29:42 User accepted disc space warning and is attempting to truncate! I 16:29:42 Operation Started! I 16:29:42 Source File: E:\F0rzA_M_4x(32)\Dark Souls Prepare to Die Edition [PAL]\DVD.dvd I 16:29:42 Source File Sectors: 4,267,015 (MODE1/2048) I 16:29:42 Source File Size: 8,738,846,720 bytes I 16:29:42 Source File Volume Identifier: DVD_ROM I 16:29:42 Source File Volume Set Identifier: b4b08000MS UDFBridge I 16:29:42 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 16:29:42 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 16:29:42 Source File File System(s): ISO9660, UDF (1.50) I 16:29:42 Destination Device: [0:0:0] HL-DT-ST DVDRAM GUC0N AS01 (F:) (SATA) I 16:29:42 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) I 16:29:42 Destination Media Supported Write Speeds: 3x, 4x, 6x I 16:29:42 Destination Media Sectors: 4,173,824 I 16:29:42 Destination Media L0 Data Zone Capacity: 2,086,912 (Changeable: Yes) I 16:29:42 Write Mode: DVD I 16:29:42 Write Type: DAO I 16:29:42 Write Speed: 2.4x I 16:29:42 DVD+R DL Reserve Track: No I 16:29:42 Link Size: Auto I 16:29:42 Lock Volume: Yes I 16:29:42 Test Mode: No I 16:29:42 OPC: No I 16:29:42 BURN-Proof: Enabled W 16:29:43 Write Speed Miscompare! - Wanted: 3,324 KB/s (2.4x), Got: 4,155 KB/s (3x) W 16:29:43 The drive only supports writing these discs at 3x, 4x, 6x. I 16:29:43 Book Type Setting: DVD-ROM W 16:29:43 Optimal layer break position exceeds L0 capacity. W 16:29:43 Optimal L0 Sectors: 2,133,520 W 16:29:43 Maximum L0 Sectors: 2,086,912 I 16:29:43 Optimal L0 Data Zone Capacity: 2,133,520 I 16:29:43 Optimal L0 Data Zone Method: Copied From Original Disc W 16:29:43 Set L0 Data Zone Capacity Failed! - Reason: Invalid Field in Parameter List I 16:29:43 L0 Data Zone Capacity - Effective: 2,086,912 I 16:29:45 Filling Buffer... (80 MiB) I 16:29:46 Writing LeadIn... W 16:30:22 Failed to Write Sectors 0 - 31 - Reason: Power Calibration Area Error W 16:30:22 Retrying (1 of 20)... W 16:30:37 Retry Failed - Reason: Power Calibration Area Error W 16:30:37 Retrying (2 of 20)... W 16:30:59 Retry Failed - Reason: Power Calibration Area Error W 16:30:59 Retrying (3 of 20)... W 16:31:23 Retry Failed - Reason: Power Calibration Area Error W 16:31:23 Retrying (4 of 20)... W 16:31:40 Retry Failed - Reason: Power Calibration Area Error W 16:31:40 Retrying (5 of 20)... W 16:32:09 Retry Failed - Reason: Power Calibration Area Error W 16:32:10 Retrying (6 of 20)... W 16:32:41 Retry Failed - Reason: Power Calibration Area Error W 16:32:41 Retrying (7 of 20)... W 16:33:39 Retry Failed - Reason: Power Calibration Area Error W 16:33:39 Retrying (8 of 20)... I 16:33:43 Abort Request Acknowledged W 16:34:29 Retry Failed - Reason: Power Calibration Area Error E 16:34:29 Failed to Write Sectors 0 - 31 - Reason: Power Calibration Area Error I 16:34:29 Synchronising Cache... W 16:34:33 User opted to skip the 'Close Track/Session/Disc' functions. E 16:34:33 Failed to Write Image! E 16:34:33 Operation Aborted! - Duration: 00:04:50 I 16:34:33 Average Write Rate: N/A - Maximum Write Rate: N/A Edited September 13, 2021 by Cylinder No.3 Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted September 13, 2021 Share Posted September 13, 2021 Yes, I’d say it’s an issue with your drive. Also, you’re trying to burn one of those oversized images and you can only do that with certain drives. These days, you’ll need to buy a ‘plus’ model of one of the Vinpower Digital offerings (Plextor/ pioneer/optiarc). Link to comment Share on other sites More sharing options...
Cylinder No.3 Posted September 13, 2021 Author Share Posted September 13, 2021 Can external DVD drives do that and is there a way to check if a driver CAN burn oversized images? Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted September 13, 2021 Share Posted September 13, 2021 It's going back a good few years now, but only real LiteOn iHAS drives were capable of burning them nicely - and only really on the MKM-003-00 discs. The Vinpower Digital 'plus' drives have been designed (firmware modified appropriately) to support it. You'd have to get one of those and put it in a suitable USB enclosure. Link to comment Share on other sites More sharing options...
Cylinder No.3 Posted September 13, 2021 Author Share Posted September 13, 2021 Thank you Lighting. I'll see if there are any available in my area. Link to comment Share on other sites More sharing options...
Recommended Posts