Himself Posted January 5, 2007 Share Posted January 5, 2007 (edited) So, here's my problem: I've been trying to burn some Xbox360 games, but almost every time (the last one was successful) i get an error while burning, and every time it's at a different percentage. The error looks like this: . How can i get rid of this error? I've ruined 3 dvd9's so far. Edited January 5, 2007 by Himself Link to comment Share on other sites More sharing options...
lfcrule1972 Posted January 5, 2007 Share Posted January 5, 2007 The error message is not showing up for me - can you instead post the ImgBurn log as this will tell us a lot of info that we need. If I had to guess I would say that you are not using Verbatim DVD+R DL discs, these are the only ones we recommend for Dual Layer burns at the moment. However, to be sure we need to see the log. You can view the logs via Imgburn using the drop down menus at the top of the GUI. Just copy paste the last one with errors here and we will take a look. Link to comment Share on other sites More sharing options...
Himself Posted January 5, 2007 Author Share Posted January 5, 2007 (edited) 11:04:44 ImgBurn Version 2.1.0.0 started! I 11:04:44 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2) I 11:04:44 Initialising SPTI... I 11:04:44 Searching for SCSI / ATAPI devices... I 11:04:44 Found 1 CD-RW, 2 DVD-ROMs and 1 DVD?RW/RAM! I 11:06:12 Operation Started! I 11:06:12 Source File: D:\New Folder (2)\IMAGE.dvd I 11:06:12 Source File Sectors: 3 697 696 (MODE1/2048) I 11:06:12 Source File Size: 7 572 881 408 bytes I 11:06:12 Source File Volume Identifier: XBOX360 I 11:06:12 Source File Implementation Identifier: Daikin U.S. Comtec Lab I 11:06:12 Source File File System(s): ISO9660; UDF (1.02) I 11:06:12 Destination Device: [1:0:0] LITE-ON DVDRW SHM-165P6S MS0R (E:) (ATA) I 11:06:12 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D00-01) (Speeds: 2.4x) I 11:06:12 Destination Media Sectors: 4 173 824 I 11:06:12 Write Mode: DVD I 11:06:12 Write Type: DAO I 11:06:12 Write Speed: 2.4x I 11:06:12 Link Size: Auto I 11:06:12 Test Mode: No I 11:06:12 BURN-Proof: Enabled I 11:06:12 User Specified L0 Data Zone Capacity: 1 913 760 I 11:07:02 Filling Buffer... I 11:07:02 Writing LeadIn... I 11:07:04 Writing Image... I 11:07:04 Writing Layer 0... (LBA: 0 - 1913759) I 11:26:38 Writing Layer 1... (LBA: 1913760 - 3697695) W 11:42:14 Failed to Write Sectors 3411168 - 3411199 - Write Error W 11:42:14 Retrying (1 of 20)... W 11:42:14 Retry Failed - Invalid Address For Write W 11:42:14 Retrying (2 of 20)... W 11:42:14 Retry Failed - Invalid Address For Write W 11:42:14 Retrying (3 of 20)... W 11:42:14 Retry Failed - Invalid Address For Write W 11:42:14 Retrying (4 of 20)... W 11:42:14 Retry Failed - Invalid Address For Write W 11:42:14 Retrying (5 of 20)... W 11:42:14 Retry Failed - Invalid Address For Write W 11:42:14 Retrying (6 of 20)... W 11:42:14 Retry Failed - Invalid Address For Write W 11:42:14 Retrying (7 of 20)... W 11:42:14 Retry Failed - Invalid Address For Write W 11:42:14 Retrying (8 of 20)... W 11:42:14 Retry Failed - Invalid Address For Write W 11:42:14 Retrying (9 of 20)... W 11:42:14 Retry Failed - Invalid Address For Write W 11:42:14 Retrying (10 of 20)... W 11:42:14 Retry Failed - Invalid Address For Write W 11:42:14 Retrying (11 of 20)... W 11:42:14 Retry Failed - Invalid Address For Write W 11:42:14 Retrying (12 of 20)... W 11:42:14 Retry Failed - Invalid Address For Write W 11:42:14 Retrying (13 of 20)... W 11:42:14 Retry Failed - Invalid Address For Write W 11:42:14 Retrying (14 of 20)... W 11:42:14 Retry Failed - Invalid Address For Write W 11:42:14 Retrying (15 of 20)... W 11:42:14 Retry Failed - Invalid Address For Write W 11:42:14 Retrying (16 of 20)... W 11:42:14 Retry Failed - Invalid Address For Write W 11:42:14 Retrying (17 of 20)... W 11:42:14 Retry Failed - Invalid Address For Write W 11:42:14 Retrying (18 of 20)... W 11:42:14 Retry Failed - Invalid Address For Write W 11:42:14 Retrying (19 of 20)... W 11:42:14 Retry Failed - Invalid Address For Write W 11:42:14 Retrying (20 of 20)... W 11:42:22 Retrying (21)... <--- that's when the error message popped up W 11:42:22 Retry Failed - Invalid Address For Write E 11:44:06 Failed to Write Sectors 3411168 - 3411199 - Write Error I 11:44:06 Synchronising Cache... I 11:44:07 Closing Track... W 11:45:18 Potential 'WaitImmediateIO' Deferred Error - (0/2) - Power Calibration Area Error W 11:46:37 Potential 'WaitImmediateIO' Deferred Error - (0/2) - Power Calibration Area Error E 11:46:38 Close Track Failed! - Reason: Power Calibration Area Error I 11:46:38 Finalising Disc... E 11:46:39 Finalise Disc Failed! - Reason: Session Fixation Error - Incomplete Track in Session E 11:46:39 Failed to Write Image! E 11:46:42 Operation Failed! - Duration: 00:40:27 I 11:46:42 Average Write Rate: 3 071 KB/s (2.2x) - Maximum Write Rate: 4 306 KB/s (3.1x) I 12:49:00 Close Request Acknowledged I 12:49:00 Closing Down... I 12:49:01 Shutting down SPTI... I 12:49:01 ImgBurn closed! And yes, i'm not using Verbatim discs. And after this, without restarting ImgBurn, i tried again, with another disc just like that one and that time it burned successfully. Edited January 5, 2007 by Himself Link to comment Share on other sites More sharing options...
lfcrule1972 Posted January 5, 2007 Share Posted January 5, 2007 I would almost bet my mortgage on it being the RICOH dye on those discs, I have used some myself and they were very poor whereas I have never had a bad burn with Verbatim DVD+R DLs which is why we only recommend the latter. Thing is with lower class media some might burn ok but most will not and will give you these problems you are seeing, as you can see your drive is unable to write to the second layer of these discs. My advice is to give Verbatims DVD+R DLs a go Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted January 5, 2007 Share Posted January 5, 2007 The first error you get is the real one. The retries almost always give you something different. In your case, the real one is: W 11:42:14 Failed to Write Sectors 3411168 - 3411199 - Write Error So your drive just failed to burn to the disc. As lfc said, this is because you're using cheapo double layer media. Verbatim media might cost more but then you don't end up throwing it in the bin. As with most things in life, you get what you pay for. btw, you do not need to manually specify the layer break position in the settings, put that option back on 'Automatic' and just let ImgBurn read the value from the .DVD file. Link to comment Share on other sites More sharing options...
snnorlaxx Posted January 6, 2007 Share Posted January 6, 2007 The first error you get is the real one. The retries almost always give you something different. In your case, the real one is: W 11:42:14 Failed to Write Sectors 3411168 - 3411199 - Write Error So your drive just failed to burn to the disc. As lfc said, this is because you're using cheapo double layer media. Verbatim media might cost more but then you don't end up throwing it in the bin. As with most things in life, you get what you pay for. btw, you do not need to manually specify the layer break position in the settings, put that option back on 'Automatic' and just let ImgBurn read the value from the .DVD file. Similar problem here again, burnt 4 or 5 disk without any problems and now fubarred 2 disks, 1 last night and 1 just now. All burns using Verbatim+R D/L disks. Here's a copy of the last log file: ; //****************************************\\ ; ImgBurn Version 2.1.0.0 - Log ; Friday, 05 January 2007, 21:10:08 ; \\****************************************// ; ; I 21:06:27 ImgBurn Version 2.1.0.0 started! I 21:06:27 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2) I 21:06:27 Initialising SPTI... I 21:06:27 Searching for SCSI / ATAPI devices... I 21:06:27 Found 1 CD-RW, 2 DVD-ROMs and 1 DVD?RW/RAM! I 21:08:47 Operation Started! I 21:08:47 Source File: H:\gmb-fau\gmb-fau.dvd I 21:08:47 Source File Sectors: 3,697,696 (MODE1/2048) I 21:08:47 Source File Size: 7,572,881,408 bytes I 21:08:47 Source File File System(s): None I 21:08:47 Destination Device: [1:0:0] MATSHITA DVD-RAM SW-9574S A100 (D:) (ATA) I 21:08:47 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2.4x, 4x) I 21:08:47 Destination Media Sectors: 4,173,824 I 21:08:47 Write Mode: DVD I 21:08:47 Write Type: DAO I 21:08:47 Write Speed: 1x I 21:08:47 Link Size: Auto I 21:08:47 Test Mode: No I 21:08:47 BURN-Proof: Enabled I 21:08:47 User Specified L0 Data Zone Capacity: 1,913,760 I 21:09:12 Filling Buffer... I 21:09:13 Writing LeadIn... I 21:09:14 Writing Image... I 21:09:14 Writing Layer 0... (LBA: 0 - 1913759) W 21:09:29 Failed to Write Sectors 21216 - 21247 - Peripheral Device Write Fault W 21:09:29 Retrying (1 of 20)... W 21:09:29 Retry Failed - Cannot Write Medium - Incompatible Format W 21:09:29 Retrying (2 of 20)... W 21:09:29 Retry Failed - Cannot Write Medium - Incompatible Format W 21:09:29 Retrying (3 of 20)... W 21:09:29 Retry Failed - Cannot Write Medium - Incompatible Format W 21:09:29 Retrying (4 of 20)... W 21:09:29 Retry Failed - Cannot Write Medium - Incompatible Format W 21:09:29 Retrying (5 of 20)... W 21:09:29 Retry Failed - Cannot Write Medium - Incompatible Format W 21:09:29 Retrying (6 of 20)... W 21:09:29 Retry Failed - Cannot Write Medium - Incompatible Format W 21:09:29 Retrying (7 of 20)... W 21:09:29 Retry Failed - Cannot Write Medium - Incompatible Format W 21:09:29 Retrying (8 of 20)... W 21:09:29 Retry Failed - Cannot Write Medium - Incompatible Format W 21:09:29 Retrying (9 of 20)... W 21:09:29 Retry Failed - Cannot Write Medium - Incompatible Format W 21:09:29 Retrying (10 of 20)... W 21:09:29 Retry Failed - Cannot Write Medium - Incompatible Format W 21:09:29 Retrying (11 of 20)... W 21:09:29 Retry Failed - Cannot Write Medium - Incompatible Format W 21:09:29 Retrying (12 of 20)... W 21:09:29 Retry Failed - Cannot Write Medium - Incompatible Format W 21:09:29 Retrying (13 of 20)... W 21:09:29 Retry Failed - Cannot Write Medium - Incompatible Format W 21:09:30 Retrying (14 of 20)... W 21:09:30 Retry Failed - Cannot Write Medium - Incompatible Format W 21:09:30 Retrying (15 of 20)... W 21:09:30 Retry Failed - Cannot Write Medium - Incompatible Format W 21:09:30 Retrying (16 of 20)... W 21:09:30 Retry Failed - Cannot Write Medium - Incompatible Format W 21:09:30 Retrying (17 of 20)... W 21:09:30 Retry Failed - Cannot Write Medium - Incompatible Format W 21:09:30 Retrying (18 of 20)... W 21:09:30 Retry Failed - Cannot Write Medium - Incompatible Format W 21:09:30 Retrying (19 of 20)... W 21:09:30 Retry Failed - Cannot Write Medium - Incompatible Format W 21:09:30 Retrying (20 of 20)... W 21:09:30 Retry Failed - Cannot Write Medium - Incompatible Format W 21:09:47 Retrying (21)... W 21:09:47 Retry Failed - Cannot Write Medium - Incompatible Format E 21:09:48 Failed to Write Sectors 21216 - 21247 - Peripheral Device Write Fault I 21:09:48 Synchronising Cache... I 21:09:49 Closing Track... E 21:09:52 Close Track Failed! - Reason: Cannot Write Medium - Incompatible Format I 21:09:52 Finalising Disc... E 21:09:53 Finalise Disc Failed! - Reason: Cannot Write Medium - Incompatible Format E 21:09:53 Failed to Write Image! E 21:09:53 Operation Failed! - Duration: 00:01:06 I 21:09:53 Average Write Rate: 1,248 KB/s (0.9x) - Maximum Write Rate: 3,334 KB/s (2.4x) I 21:10:08 Close Request Acknowledged I 21:10:08 Closing Down... I 21:10:08 Shutting down SPTI... I 21:10:08 ImgBurn closed! thanks again Link to comment Share on other sites More sharing options...
Movie Junkie Posted January 6, 2007 Share Posted January 6, 2007 The first error you get is the real one. The retries almost always give you something different. In your case, the real one is: W 11:42:14 Failed to Write Sectors 3411168 - 3411199 - Write Error So your drive just failed to burn to the disc. As lfc said, this is because you're using cheapo double layer media. Verbatim media might cost more but then you don't end up throwing it in the bin. As with most things in life, you get what you pay for. btw, you do not need to manually specify the layer break position in the settings, put that option back on 'Automatic' and just let ImgBurn read the value from the .DVD file. Similar problem here again, burnt 4 or 5 disk without any problems and now fubarred 2 disks, 1 last night and 1 just now. All burns using Verbatim+R D/L disks. Here's a copy of the last log file: ; //****************************************\\ ; ImgBurn Version 2.1.0.0 - Log ; Friday, 05 January 2007, 21:10:08 ; \\****************************************// ; ; I 21:06:27 ImgBurn Version 2.1.0.0 started! I 21:06:27 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2) I 21:06:27 Initialising SPTI... I 21:06:27 Searching for SCSI / ATAPI devices... I 21:06:27 Found 1 CD-RW, 2 DVD-ROMs and 1 DVD?RW/RAM! I 21:08:47 Operation Started! I 21:08:47 Source File: H:\gmb-fau\gmb-fau.dvd I 21:08:47 Source File Sectors: 3,697,696 (MODE1/2048) I 21:08:47 Source File Size: 7,572,881,408 bytes I 21:08:47 Source File File System(s): None I 21:08:47 Destination Device: [1:0:0] MATSHITA DVD-RAM SW-9574S A100 (D:) (ATA) I 21:08:47 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2.4x, 4x) I 21:08:47 Destination Media Sectors: 4,173,824 I 21:08:47 Write Mode: DVD I 21:08:47 Write Type: DAO I 21:08:47 Write Speed: 1x I 21:08:47 Link Size: Auto I 21:08:47 Test Mode: No I 21:08:47 BURN-Proof: Enabled I 21:08:47 User Specified L0 Data Zone Capacity: 1,913,760 I 21:09:12 Filling Buffer... I 21:09:13 Writing LeadIn... I 21:09:14 Writing Image... I 21:09:14 Writing Layer 0... (LBA: 0 - 1913759) W 21:09:29 Failed to Write Sectors 21216 - 21247 - Peripheral Device Write Fault thanks again I'm not sure if this is part of your problem but 1x is not a correct write speed for your discs. In your first log you had the write speed set to 2.4x and you wrote to Layer 0 but had problems with Layer 1. Now, with the write speed set a 1x you failed to even burn the first layer. In addition you did not take LUK's advice when he said "you do not need to manually specify the layer break position in the settings, put that option back on 'Automatic' and just let ImgBurn read the value from the .DVD file." Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted January 6, 2007 Share Posted January 6, 2007 Please don't hijack threads, it just confuses people (me!). Look for a firmware update for your matshita drive or buy another one - I've never seen a decent matshita drive yet. Link to comment Share on other sites More sharing options...
Movie Junkie Posted January 6, 2007 Share Posted January 6, 2007 Please don't hijack threads, it just confuses people (me!). Look for a firmware update for your matshita drive or buy another one - I've never seen a decent matshita drive yet. It confused me as well LUK. I didn't realize that it was someone else. Link to comment Share on other sites More sharing options...
Recommended Posts