Jump to content

error will not burn using alcohol 120


ekikos

Recommended Posts

Ok well if your drive does support PI/PO scanning you need to use Google to grab the latest copy of DVDinfoPro (by Nic Wilson, I think it's Wilson anyway !!)

 

Then install DVDinfoPro and open the program.

 

Insert the disc you want to test for burn quality into the supported drive

 

From the list of buttons along the top of the DVDinfoPro window select PI/PO

 

Check out the scan .png file below to replicate the DVDinfoPro settings (shown on right of screen)

 

post-2-1169672748.png

 

Once the settings in your window match those above use the Start button on lower right of screen to start the test.

 

When it reaches 100% you can click the little camera button to save the scan as a .png file (it may default to .jpg, but .png is better quality)

 

Finally you can then either host the image at www.imageshack.us and copy the link to display it here or simply attach it when using ADDREPLY on the forum and it will be displayed for you.

 

:)

Link to comment
Share on other sites

Ok, I did the TEST, though ?I am not sure whether Jitter is supported or not as the option was greyed out through out. I have also did the same test Using NERO CD DVD SPEED, just in case it helps you to decide [surprisingly the test differ quite a lot in the quality score output]. The report generated by NERO is as follows:

 

General Information

Drive: LITE-ON DVDRW SHM-165H6S

Firmware: HS0E

Disc: DVD-R (POSG06)

Selected speed: 4 X

PI errors

Maximum: 154

Average: 50.84

Total: 718762

PI failures

Maximum: 6

Average: 0.16

Total: 3188

PO failures: n/a

Jitter

Maximum: 8.6 %

Average: 7.97 %

Scanning Statistics

Elapsed time: 15:13

Number of samples: 122865

Average scanning interval: 1.14 ECC

Glitches removed: 0

I did this test with NERO twice, and the first time there was no Jitter, it was mentioned as n/a.

 

General Information

Drive: LITE-ON DVDRW SHM-165H6S

Firmware: HS0E

Disc: DVD-R (POSG06)

Selected speed: 4 X

PI errors

Maximum: 288

Average: 83.97

Total: 913662

PI failures

Maximum: 3

Average: 0.16

Total: 3007

PO failures: n/a

Jitter: n/a

Scanning Statistics

Elapsed time: 10:56

Number of samples: 93755

Average scanning interval: 1.15 ECC

Glitches removed: 0

 

I have no idea what has really happened.

 

Anyways, I hope this would help you.

 

I tried my best, still if there is an change required, I shall be happy to apply that and contribute in my very small way to this community.

post-4975-1169753833_thumb.png

post-4975-1169753850_thumb.png

Link to comment
Share on other sites

Hi Ifcrule,

 

here is another test result. The second test using NERO used the same DVD in the same drive and in between the two tests the DVD was not removed from the drive. About five minutes gap was allowed between these two tests.

 

Please comment.

post-4975-1169787026_thumb.png

post-4975-1169788756_thumb.png

Edited by Tiger
Link to comment
Share on other sites

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.