Jump to content

Issue with Layer Break and Image Tool


Dmoore

Recommended Posts

When attempting to burn to a Verbatim DVD+R DL I receive the following log:

 

I 09:04:21 ImgBurn Version 2.1.0.0 started!

I 09:04:21 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2)

I 09:04:21 Initialising ASPI...

I 09:04:21 WNASPI32.DLL - Adaptec's ASPI Layer - ASPI for Win32 (95/NT) DLL - Version 4.71.1.0

I 09:04:21 Searching for SCSI / ATAPI devices...

W 09:04:21 No devices detected!

W 09:05:54 I/O Interface has been changed!

I 09:05:54 Shutting down ASPI...

I 09:05:54 Initialising SPTI...

I 09:05:54 Searching for SCSI / ATAPI devices...

I 09:05:54 Found 1 DVD-ROM and 1 DVD?RW!

W 09:06:09 I/O Interface has been changed!

I 09:06:09 Shutting down SPTI...

I 09:06:09 Initialising ASAPI...

I 09:06:09 ASAPI.DLL - ASAPI Driver Library - Version 5.0.0.2

I 09:06:09 Searching for SCSI / ATAPI devices...

E 09:06:09 GetASPI32SupportInfo Failed!

E 09:06:09 Reason: General internal ASAPI failure

W 09:06:29 I/O Interface has been changed!

I 09:06:29 Shutting down ASAPI...

I 09:06:29 Initialising SPTI...

I 09:06:29 Searching for SCSI / ATAPI devices...

I 09:06:30 Found 1 DVD-ROM and 1 DVD?RW!

I 09:06:35 Operation Started!

I 09:06:35 Source File: D:\DVD Root Video\THE_LIBERTINE.iso

I 09:06:35 Source File Sectors: 3,514,298 (MODE1/2048)

I 09:06:35 Source File Size: 7,197,282,304 bytes

I 09:06:35 Source File Volume Identifier: THE_LIBERTINE

I 09:06:35 Source File Application Identifier: MKISOFS ISO 9660/HFS FILESYSTEM BUILDER & CDRECORD CD-R/DVD CREATOR © 1993 E.YOUNGDALE © 1997 J.PEARSON/J.SCHILLING

I 09:06:35 Source File Implementation Identifier: mkisofs

I 09:06:35 Source File File System(s): ISO9660, UDF (1.02)

I 09:06:35 Destination Device: [1:1:0] SONY DVD RW DRU-720A JY08 (F:) (ATA)

I 09:06:35 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2.4x, 4x)

I 09:06:35 Destination Media Sectors: 4,173,824

I 09:06:35 Write Mode: DVD

I 09:06:35 Write Type: DAO

I 09:06:35 Write Speed: MAX

I 09:06:35 Link Size: Auto

I 09:06:35 Test Mode: No

I 09:06:35 BURN-Proof: Enabled

 

In addition the following message pops up:

 

Optimal L1 Data Zone Start LBA: None Found! (VTS_10)

This image has not been mastered correctly for burning onto a double layer (OTP Track Path) disc.

None of the cells meet 'DVD-Video specification' criteria for a potential layer break position.

Do you want to continue anyway?

 

I am using ImgTool Classic 0.91.7 to creat an image. My version of Nero is 6.6.1.4.

 

The process had worked flawlessly until recently. I unistalled both Roxio Easy CD/DVD Creator 6 Platinum and Nero thinking perhaps a conflict existed between the two when I upgraded my version of Nero. Used RoxiZap to complete the uninstall of Roxio. I reinstalled Nero and did the version upgrade. Still with the same results. I can burn single layer discs successfully after using DVD Shrink, ImgTool Classic, then Imgburn.

 

What am I missing?

 

Thanks

Link to comment
Share on other sites

go into imgburn settings and press defaults, if that does not put I/O back to SPTI then do this yourself, you must have admin privileges to use SPTI though.

 

Failing that go into program files and open the ahead folder and search for wnaspi32.dll then copy it to the imgburn folder, you could then choose that I/O in imgburn, if it says not found then copy wnaspi32.dll to system 32 folder

 

 

io3ux.jpg

Edited by dontasciime
Link to comment
Share on other sites

Recreate the image using ImgBurn's 'Build' mode.

 

You can't use ImgTool Classic for double layer images.

 

 

First, the good news. I did as you recommended. Imgburn went through the process without a glitch. Played the nice music indicating a successful burn.

 

The bad news. The disc does not want to play on any of the stand alone DVD players or computers. The disc runs and runs without booting. It finally stopped on the CPU. I could not open it to see what is on it. This is a Verbatim DVD+R DL burnt with a Sony DRU 720A.

Link to comment
Share on other sites

Recreate the image using ImgBurn's 'Build' mode.

 

You can't use ImgTool Classic for double layer images.

 

 

First, the good news. I did as you recommended. Imgburn went through the process without a glitch. Played the nice music indicating a successful burn.

 

The bad news. The disc does not want to play on any of the stand alone DVD players or computers. The disc runs and runs without booting. It finally stopped on the CPU. I could not open it to see what is on it. This is a Verbatim DVD+R DL burnt with a Sony DRU 720A.

 

Here's data that Imgburn provided:

 

SONY DVD RW DRU-720A JY08 (ATA)

Current Profile: DVD+R DL

 

Disc Information:

Status: Complete

Erasable: No

Sessions: 1

Sectors: 3,514,160

Size: 7,196,999,680 bytes

Time: 780:57:35 (MM:SS:FF)

Supported Write Speeds: 2.4x, 4x

 

DVD?R DL Boundary Information:

L0 Data Zone Capacity: 1,842,848

Changeable: No

 

Physical Format Information (ADIP):

Disc ID: MKM-001-00

Book Type: DVD+R DL

Part Version: 1

Disc Size: 120mm

Maximum Read Rate: Not Specified

Number of Layers: 2

Track Path: Opposite Track Path (OTP)

Linear Density: 0.293 um/bit

Track Density: 0.74 um/track

First Physical Sector of Data Area: 196,608

Last Physical Sector of Data Area: 16,580,607

Last Physical Sector in Layer 0: 2,283,519

 

Physical Format Information (Last Recorded):

Disc ID: MKM-001-00

Book Type: DVD-ROM

Part Version: 1

Disc Size: 120mm

Maximum Read Rate: Not Specified

Number of Layers: 2

Track Path: Opposite Track Path (OTP)

Linear Density: 0.293 um/bit

Track Density: 0.74 um/track

First Physical Sector of Data Area: 196,608

Last Physical Sector of Data Area: 16,409,071

Last Physical Sector in Layer 0: 2,039,455

 

Layer Information:

Layer 0 Sectors: 1,842,848 (52.44%)

Layer 1 Sectors: 1,671,312 (47.56%)

Link to comment
Share on other sites

I'd be very surprised if the PC that burnt / verified the disc then failed to play it!

 

The verify stage has proved it can read it, so if it won't play, maybe the files weren't right in the first place?

 

What software are you playing the disc with?

 

Tried WinDVD and Cyberlink Power DVD

 

I reviewed my setup of imgburn and noticed that verify was not checked.

Link to comment
Share on other sites

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.