boomish Posted January 30, 2007 Share Posted January 30, 2007 I get these weird errors when burning, is the media or windows trying to read the disk? THe discs seem to play ok after clicking cancel on the error box that comes up. this is with Infiniti 360 8x injet printable ( supposed to be one of the best) thanks for any help in advance, oh and Imgburn is the best BTW!!always been a big fan of dvd Dycrypter I 00:57:25 ImgBurn Version 2.1.0.0 started! I 00:57:25 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2) I 00:57:25 Initialising SPTI... I 00:57:25 Searching for SCSI / ATAPI devices... I 00:57:25 Found 1 CD-RW, 1 DVD-ROM and 1 DVD?RW! I 00:58:10 Operation Started! I 00:58:10 Source File: G:\Xbox 360\Viva.Pinata.PAL.MULTI.XBOX360-WAR3X\wrx-vivap\IMAGE1.dvd I 00:58:10 Source File Sectors: 3,697,696 (MODE1/2048) I 00:58:10 Source File Size: 7,572,881,408 bytes I 00:58:10 Source File Volume Identifier: XBOX360 I 00:58:10 Source File Implementation Identifier: Daikin U.S. Comtec Lab I 00:58:10 Source File File System(s): ISO9660, UDF (1.02) I 00:58:10 Destination Device: [0:3:0] PIONEER DVD-RW DVR-111D 1.29 (E:) (ATA) I 00:58:10 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67) (Speeds: 2.4x, 4x, 6x, 8x) I 00:58:10 Destination Media Sectors: 4,173,824 I 00:58:10 Write Mode: DVD I 00:58:10 Write Type: DAO I 00:58:10 Write Speed: 2.4x I 00:58:10 Link Size: Auto I 00:58:10 Test Mode: No I 00:58:10 BURN-Proof: Enabled I 00:58:10 User Specified L0 Data Zone Capacity: 1,913,760 I 00:58:33 Filling Buffer... I 00:58:39 Writing LeadIn... I 00:58:41 Writing Image... I 00:58:41 Writing Layer 0... (LBA: 0 - 1913759) I 01:18:41 Writing Layer 1... (LBA: 1913760 - 3697695) W 01:36:55 Waiting for buffers to recover... W 01:37:01 Waiting for hard disk activity to reach threshold level... I 01:37:07 Writing Image... I 01:37:34 Synchronising Cache... I 01:37:35 Closing Track... I 01:37:37 Finalising Disc... W 01:38:11 Potential 'WaitImmediateIO' Deferred Error - (1/2) - Positioning Error Detected by Read of Medium ( this is where I press re-try) W 02:05:05 Potential 'WaitImmediateIO' Deferred Error - (1/2) - Positioning Error Detected by Read of Medium W 02:05:31 Potential 'WaitImmediateIO' Deferred Error - (1/2) - Positioning Error Detected by Read of Medium W 02:05:54 Potential 'WaitImmediateIO' Deferred Error - (1/2) - Positioning Error Detected by Read of Medium E 02:05:56 Finalise Disc Failed! - Reason: Positioning Error Detected by Read of Medium (thi is where I pressed cancel) I 02:05:56 Image MD5: 5c780cb39b8562c2f8f03d8f9b2e455e I 02:05:56 Operation Successfully Completed! - Duration: 01:07:45 I 02:05:56 Average Write Rate: 3,171 KB/s (2.3x) - Maximum Write Rate: 3,438 KB/s (2.5x) Link to comment Share on other sites More sharing options...
dontasciime Posted January 30, 2007 Share Posted January 30, 2007 sorry but those disc's are not very good, if you try using verbatim dl+ order code 43562 you should see those errors go. If you do get verbs make sure your writers firmware is up to date, If you still get errors then, it may be down to a faulty writer. Link to comment Share on other sites More sharing options...
boomish Posted January 30, 2007 Author Share Posted January 30, 2007 sorry but those disc's are not very good, if you try using verbatim dl+ order code 43562 you should see those errors go.If you do get verbs make sure your writers firmware is up to date, If you still get errors then, it may be down to a faulty writer. thanks Donta, where is the order code for? sorry if this is obvious, I couldnt see a link to shop anywhere or is that the model number? I looked on SVP but they are out of stock and wow really expensive!! any good UK supplier? I have burnt two discs with CloneCD and the above discs are fine so far.(am trying to help not having a go at IMGburn as I much prefere it) Cheers Link to comment Share on other sites More sharing options...
dontasciime Posted January 30, 2007 Share Posted January 30, 2007 (edited) 43562 was a reorder number for verbatim or rather from verbatim direct, its the part number for the discs i get with 100% success so far on various writers. As soon as Svp get stock they do not last long. Will have a look where i usually go when svp are out. gimme 5 minutes edit i only use ImgBurn to write my 360 stuff not 1 failure so far. http://www.bigpockets.co.uk/product.php?la...8dac531c35e56bd 25 pack and printable as well i usually only get 10 packs X however many i want etc. http://www.digitalpromo.co.uk/optical-medi...9b1ae1d09de2b6c http://www.tekheads.co.uk/s/product?product=607037 http://www.microwarehouse.co.uk/catalogue/...ad=shopping.com Edited January 30, 2007 by dontasciime Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted January 30, 2007 Share Posted January 30, 2007 Your errors are coming from a point in the burn where I doubt many programs would notice them - I know ImgBurn never used to. So long as the discs end up with the info panel on the right saying 'Status: Complete', the drive probably managed to finalise it just enough for it to count. Link to comment Share on other sites More sharing options...
boomish Posted January 30, 2007 Author Share Posted January 30, 2007 Thanks again donta, your a star, I'll order some of those Will have a look where i usually go when svp are out. gimme 5 minutes edit i only use ImgBurn to write my 360 stuff not 1 failure so far. http://www.bigpockets.co.uk/product.php?la...8dac531c35e56bd 25 pack and printable as well i usually only get 10 packs X however many i want etc. Link to comment Share on other sites More sharing options...
lfcrule1972 Posted January 30, 2007 Share Posted January 30, 2007 Don't forget to let us know how you get on Link to comment Share on other sites More sharing options...
Recommended Posts