Jump to content

Error msg during verification


Pain_Man

Recommended Posts

I burned a disc without problems, a copy of a friend's student film project, and during the Verify process I got the error message below. I'd like to know what it means since I don't understand it. Particularly: "L-EC Uncorrectable Error". What's an L-EC error? :unsure:

 

(While I haven't watched the entire disc yet, it did load with no problems in WinDVD8 and I watched several minutes of it.)

 

IBVerifyErrorMsg.png

 

Disc: Ritek-D01-01

Burner: Plextor 760A

OS: Media Center Edition 2005

CPU: Core Duo 2 E6700 2.66GHz

RAM: 4GB

Total hdd space: 1.2 TB

 

As can be seen, the burn went off with no problems but the verify choked throwing out the above message. I clicked both "Try Again" and "Continue" but the only result was a repetition of the error message.

 

Here is the IB Log as well (the relevant area is bolded):

 

I 15:22:10 ImgBurn Version 2.1.0.0 started!

I 15:22:10 Microsoft Windows XP Media Center Edition (5.1, Build 2600 : Service Pack 2)

W 15:22:10 Drive D:\ (FAT32) does not support single files > 4 GB

W 15:22:10 Drive O:\ (FAT32) does not support single files > 4 GB

W 15:22:10 Drive V:\ (FAT32) does not support single files > 4 GB

I 15:22:10 Initialising SPTI...

I 15:22:10 Searching for SCSI / ATAPI devices...

I 15:22:10 Found 3 DVD-ROMs, 1 DVD?RW and 1 DVD?RW/RAM!

I 15:23:14 Operation Started!

I 15:23:14 Source File: M:\DVD Hold File\XXXXXXXXXXX\XXXXXXXXXX.MDS

I 15:23:14 Source File Sectors: 3,773,976 (MODE1/2048)

I 15:23:14 Source File Size: 7,729,102,848 bytes

I 15:23:14 Source File Volume Identifier: XXXXXXXXXXXXX

I 15:23:14 Source File Implementation Identifier: UDF Toshiba DVD Video

I 15:23:14 Source File File System(s): ISO9660, UDF (1.02)

I 15:23:14 Destination Device: [1:1:0] PLEXTOR DVDR PX-760A 1.06 (I:) (ATA)

I 15:23:14 Destination Media Type: DVD+R DL (Disc ID: RITEK-D01-01) (Speeds: 2.4x, 4x)

I 15:23:14 Destination Media Sectors: 4,173,824

I 15:23:14 Write Mode: DVD

I 15:23:14 Write Type: DAO

I 15:23:14 Write Speed: MAX

I 15:23:14 Link Size: Auto

I 15:23:14 Test Mode: No

I 15:23:14 BURN-Proof: Enabled

I 15:23:14 Optimal L0 Data Zone Capacity: 1,886,992

I 15:23:14 Optimal L0 Data Zone Method: Copied From Original Disc

I 15:23:14 Filling Buffer...

I 15:23:15 Writing LeadIn...

I 15:24:05 Writing Image...

I 15:24:05 Writing Layer 0... (LBA: 0 - 1886991)

I 15:38:35 Writing Layer 1... (LBA: 1886992 - 3773975)

I 15:50:31 Synchronising Cache...

I 15:50:34 Closing Track...

I 15:50:36 Finalising Disc...

I 15:51:15 Image MD5: d69b043ad9096035aadb6f5161aa7601

I 15:51:18 Operation Successfully Completed! - Duration: 00:28:00

I 15:51:18 Average Write Rate: 4,759 KB/s (3.4x) - Maximum Write Rate: 5,592 KB/s (4.0x)

I 15:51:18 Cycling Tray before Verify...

I 15:52:17 Device Ready!

I 15:52:19 Operation Started!

I 15:52:19 Source Device: [1:1:0] PLEXTOR DVDR PX-760A 1.06 (I:) (ATA)

I 15:52:19 Source Media Type: DVD+R DL (Book Type: DVD-ROM) (Disc ID: RITEK-D01-01) (Speeds: 2.4x, 4x)

I 15:52:19 Image File: M:\DVD Hold File\XXXXXXXXXXX\XXXXXXXXXX.MDS

I 15:52:19 Image File Sectors: 3,773,976 (MODE1/2048)

I 15:52:19 Image File Size: 7,729,102,848 bytes

I 15:52:19 Image File Volume Identifier: XXXXXXXXXXXX

I 15:52:19 Image File Implementation Identifier: UDF Toshiba DVD Video

I 15:52:19 Image File File System(s): ISO9660, UDF (1.02)

I 15:52:19 Verifying Sectors...

W 17:35:50 Failed to read Sector 992768 - L-EC Uncorrectable Error

W 17:35:50 Sector 992768 maps to File: VIDEO_TS\VTS_01_1.VOB

W 17:35:59 Failed to read Sector 992769 - L-EC Uncorrectable Error

W 17:35:59 Sector 992769 maps to File: VIDEO_TS\VTS_01_1.VOB

W 17:36:20 Failed to read Sector 992770 - L-EC Uncorrectable Error

W 17:36:20 Sector 992770 maps to File: VIDEO_TS\VTS_01_1.VOB

E 17:36:29 Failed to read Sector 992771 - L-EC Uncorrectable Error

E 17:36:29 Sector 992771 maps to File: VIDEO_TS\VTS_01_1.VOB

E 17:36:29 Failed to Verify Sectors!

E 17:36:29 Operation Failed! - Duration: 01:44:10

I 17:36:29 Average Verify Rate: 317 KB/s (0.2x) - Maximum Verify Rate: 8,349 KB/s (6.0x)

I 17:40:24 Close Request Acknowledged

I 17:40:24 Closing Down...

I 17:40:24 Shutting down SPTI...

I 17:40:24 ImgBurn closed!

Link to comment
Share on other sites

Painman, I believe your problem is those Ritek discs your using, there pretty crappy. Thats why your verification bummed out. Do the same burn with Verbatim and you won't have any problems........ :) Also, just burn the DLs at 2.4X regardless what speed the manufacturer shows they can be burn't at. :)

 

 

Basically your drive is having difficulty reading back from the media it just wrote to. :huh:

Link to comment
Share on other sites

  • 1 year later...
Painman, I believe your problem is those Ritek discs your using, there pretty crappy. Thats why your verification bummed out. Do the same burn with Verbatim and you won't have any problems........ :) Also, just burn the DLs at 2.4X regardless what speed the manufacturer shows they can be burn't at. :)

 

 

Basically your drive is having difficulty reading back from the media it just wrote to. :huh:

 

Hi. cnotadc here,

I was wondering if there is anything I can do different, to get my DVD through the: L-EC Uncorrectable stage. It goes to about 93% and stops. I'm trying to get the image off this disc unto another. A friend had this DVD for awhile and sometimes the DVD reads as a CD. What is up with that? Should I use my DVD cleaner?

Please help...I hope I'm being CLEAR.

Thanks.

Link to comment
Share on other sites

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.