Jump to content
Sign in to follow this  
Tsuioku

Error while trying to Overburn - "Invalid Field in Parameter"

Recommended Posts

JUST FOUND OUT THAT ONLY +R MEDIA CAN BE OVERBURNED. PLEASE DISREGARD.

 

 

Whenever I try to overburn, I always receive an "Invalid Field in Parameter" error. I have also tried burning the same compilation on Nero 6.6.0.16 Ultra and receive the same error. I have tested the media using CDSpeed and it was rated of being capable of an overburn of up to 4596MB. The DVD has a rated capacity of 4489MB and I was trying to burn 4548MB. I have also tried overburning less at 4518MB but it still fails.

 

I am using a Benq DW1650 (BCDC) burning onto a TYG03 with SolidBurn and OverBurn disabled. I have also tried turning WOPC on and off and still get the same result. Anybody have an idea as to what the problem may be?

 

Here is the log...

I 01:12:11 ImgBurn Version 2.2.0.0 started!

I 01:12:11 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2)

I 01:12:11 Total Physical Memory: 1,029,748 KB - Available: 534,432 KB

W 01:12:11 Drive Z:\ (FAT32) does not support single files > 4 GB in size.

I 01:12:11 Initialising SPTI...

I 01:12:11 Searching for SCSI / ATAPI devices...

I 01:12:11 Found 1 DVD?RW!

I 01:18:41 Operation Started!

I 01:18:41 Building Image Tree...

I 01:18:41 Checking Directory Depth...

I 01:18:41 Calculating Totals...

I 01:18:41 Preparing Image...

I 01:18:42 Checking Path Length...

I 01:18:42 Image Size: 4,767,547,392 bytes

I 01:18:42 Image Sectors: 2,327,904

I 01:18:50 Operation Successfully Completed! - Duration: 00:00:09

W 01:18:59 User accepted disc space warning and is attempting to overburn!

I 01:18:59 Operation Started!

I 01:18:59 Source File: -==/\/[bUILD IMAGE]\/\==-

I 01:18:59 Source File Sectors: 2,327,904 (MODE1/2048)

I 01:18:59 Source File Size: 4,767,547,392 bytes

I 01:18:59 Source File Volume Identifier: Heroes 101-113

I 01:18:59 Source File Application Identifier: IMGBURN V2.2.0.0 - THE ULTIMATE IMAGE BURNER!

I 01:18:59 Source File Implementation Identifier: ImgBurn

I 01:18:59 Source File File System(s): ISO9660, UDF (1.02)

I 01:18:59 Destination Device: [0:1:0] BENQ DVD DD DW1650 BCDC (D:) (ATA)

I 01:18:59 Destination Media Type: DVD-R (Disc ID: TYG03) (Speeds: 4x, 8x, 12x, 16x)

I 01:18:59 Destination Media Sectors: 2,297,888

I 01:18:59 Write Mode: DVD

I 01:18:59 Write Type: DAO

I 01:18:59 Write Speed: MAX

I 01:18:59 Link Size: Auto

I 01:18:59 Test Mode: Yes

I 01:18:59 BURN-Proof: Enabled

E 01:19:58 Failed to Reserve Track! - Invalid Field in Parameter List

E 01:20:03 Operation Failed! - Duration: 00:01:04

I 01:20:03 Average Write Rate: N/A - Maximum Write Rate: N/A

Edited by Tsuioku

Share this post


Link to post
Share on other sites

I 01:18:59 Test Mode: Yes

 

with test mode enabled you wont be writing anything to the disc you're just simulating the burn, if you want to write to the disc turn test mode off (test mode =no ) BTW IMGburn works just fine on Default settings and in my opinion overburning is never a good idea

Share this post


Link to post
Share on other sites
Sign in to follow this  

×

Important Information

By using this site, you agree to our Terms of Use.