Jump to content

Firware update for LiteOn SSM-8515S?


necrocracker

Recommended Posts

Anybody know where I might find a firmware update for a LiteOn SSM-8515S? It came installed in my wife's Acer Aspire 5000 laptop and I can't seem to find any firmware anywhere. It came with GRS2 and I don't actually know how current that is. I use ImgBurn all the time on my desktops with no problems, but am having nothing but trouble with this laptop.

 

I tried one to burn a data disc using a Prodisc DVD-R and it wouldn't finish writing the lead in. I know they are junk but I've burned hundreds of these on my Pioneer 109's with no problems. After 20 minutes, I force quit and rebooted to get the disc out. It had written some, but not past the lead in.

 

Thinking maybe this drive just didn't like Prodisc, I used a Verb DVD+R DL even though the ISO was only 3Gig (all on first layer). It wrote the lead in and then the full image at 4x, but then hung up on the lead out. Again I force quit and had to reboot to get the disc out. The disc finished and reads back fine, but something isn't happy.

 

This is only the 2nd and 3rd discs that have been burned with this drive. The first was a Prodisc burned with DVD Dec that worked fine.

 

I've looked on the ACER site, the LiteOn site and rpc1.org with no firmware options at all. Any other ideas would also be a help.

 

Here is the info panel from the Verb burn. I couldn't find any saved logs, maybe since I had to force quit out both times?

 

Slimtype DVDRW SSM-8515S GRS2 (ATA)

Current Profile: DVD+R DL

 

Disc Information:

Status: Complete

Erasable: No

Sessions: 1

Sectors: 1,637,232

Size: 3,353,051,136 bytes

Time: 363:51:57 (MM:SS:FF)

Supported Write Speeds: 2.4x, 4x

 

DVD?R DL Boundary Information:

L0 Data Zone Capacity: 1,637,232

Changeable: No

 

TOC Information:

Session 1...

-> Track 01 (Mode 1, LBA: 0 - 1637231)

-> LeadOut (LBA: 1637232)

 

Physical Format Information (ADIP):

Disc ID: MKM-001-00

Book Type: DVD+R DL

Part Version: 1

Disc Size: 120mm

Maximum Read Rate: Not Specified

Number of Layers: 2

Track Path: Opposite Track Path (OTP)

Linear Density: 0.293 um/bit

Track Density: 0.74 um/track

First Physical Sector of Data Area: 196,608

Last Physical Sector of Data Area: 16,580,607

Last Physical Sector in Layer 0: 2,283,519

 

Physical Format Information (Last Recorded):

Disc ID: MKM-001-00

Book Type: DVD+R DL

Part Version: 1

Disc Size: 120mm

Maximum Read Rate: Not Specified

Number of Layers: 2

Track Path: Opposite Track Path (OTP)

Linear Density: 0.293 um/bit

Track Density: 0.74 um/track

First Physical Sector of Data Area: 196,608

Last Physical Sector of Data Area: 1,833,839

Last Physical Sector in Layer 0: 1,833,839

 

Layer Information:

Layer 0 Sectors: 1,637,232 (100%)

Layer 1 Sectors: 0 (0%)

 

 

Please move this if it would be better in another section.

Thanks!

Link to comment
Share on other sites

  • 6 months later...
  • 8 years later...

 

 

LOL

 

Only just noticed this topic has had 400+ views, that it was started in APR 07  :D

 

 

 

You think that's funny - I'm still using this drive and just came across this thread - in 2016!!!.

 

Looking out for the firmware file!

Edited by sunnymoon
Link to comment
Share on other sites

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.