Jump to content

Program memory full?


astrowolf67

Recommended Posts

Hi all, newbie here :rolleyes: I've recently (yesterday) started using imgburn to burn my image files. I've run into some problems, and the latest is this one. As soon as I hit the write button I get an error "program memory area is full". I've searched the forum, and found no results for this one. Attached below is the log file from my latest attempt.

 

Thanks for any help,

David

 

I 23:46:22 ImgBurn Version 2.3.0.0 started!

I 23:46:22 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2)

I 23:46:22 Total Physical Memory: 1,046,512 KB - Available: 620,692 KB

I 23:46:22 Initialising SPTI...

I 23:46:22 Searching for SCSI / ATAPI devices...

I 23:46:29 Found 1 DVD-ROM/CD-RW and 1 DVD?RW!

I 23:46:41 Operation Started!

I 23:46:41 Source File: D:\ERAGON_PS.ISO

I 23:46:41 Source File Sectors: 2,285,849 (MODE1/2048)

I 23:46:41 Source File Size: 4,681,418,752 bytes

I 23:46:41 Source File Volume Identifier: ERAGON_PS

I 23:46:41 Source File Implementation Identifier: DVD Shrink

I 23:46:41 Source File File System(s): ISO9660, UDF (1.02)

I 23:46:41 Destination Device: [1:1:0] BENQ DVD LS DW1655 BCHB (F:) (ATA)

I 23:46:41 Destination Media Type: DVD-R (Disc ID: MCC 02RG20) (Speeds: 4x)

I 23:46:41 Destination Media Sectors: 2,297,888

I 23:46:41 Write Mode: DVD

I 23:46:41 Write Type: DAO

I 23:46:41 Write Speed: 4x

I 23:46:41 Link Size: Auto

I 23:46:41 Test Mode: No

I 23:46:41 BURN-Proof: Enabled

E 23:46:44 Failed to Reserve Track! - Program Memory Area Is Full

E 23:46:44 Operation Failed! - Duration: 00:00:02

I 23:46:44 Average Write Rate: N/A - Maximum Write Rate: N/A

Link to comment
Share on other sites

Indeed, these are drive errors, not software errors.

 

I'm also wondering why those 8x discs are not registering as such in your BenQ? Are they real 'MCC 02RG20' ones?!

 

 

I hope they are real, I just got them from the local Sam's Club yesterday. Could the reason they are not registering as 8x be that I have imgburn manually set at 4x?

 

I'll check into the firmware upgrade, never done that before.

 

Thanks a bunch!

 

David

Link to comment
Share on other sites

Could the reason they are not registering as 8x be that I have imgburn manually set at 4x?

no , the drive would show all supported speeds and 8x should be supported for those discs if they are real verbs

try the firmware update and see what speed is supported then

Link to comment
Share on other sites

  • 1 month later...

erm i hab a similar error it shows

i tried the steps above but still not working.. i m not using a benq burner btw..

W 11:45:01 Potential 'WaitImmediateIO' Deferred Error - (0/2) - Program Memory Area Update Failure

E 11:45:02 Synchronise Cache Failed! - Reason: Program Memory Area Update Failure

I 11:45:02 Synchronising Cache (Last Attempt!)...

E 11:45:14 Synchronise Cache Failed! - Reason: Unknown (0xA0, 0x80)

I 11:45:14 Closing Track...

W 11:45:49 Potential 'WaitImmediateIO' Deferred Error - (0/2) - Program Memory Area Is Full

E 11:45:53 Close Track Failed! - Reason: Program Memory Area Is Full

I 11:45:53 Closing Track (Last Attempt!)...

I 11:45:53 Finalising Disc...

W 11:46:00 Potential 'WaitImmediateIO' Deferred Error - (0/2) - Program Memory Area Update Failure

E 11:46:01 Finalise Disc Failed! - Reason: Program Memory Area Update Failure

I 11:46:01 Finalising Disc (Last Attempt!)...

E 11:46:17 Finalise Disc Failed! - Reason: Program Memory Area Update Failure

E 11:46:17 Failed to Write Image!

E 11:46:20 Operation Failed! - Duration: 00:03:20

I 11:46:20 Average Write Rate: 466 KB/s (0.3x) - Maximum Write Rate: 2,599 KB/s (1.9x)

help me plz

Edited by sgdcf
Link to comment
Share on other sites

here is the full log

 

I 12:41:48 ImgBurn Version 2.3.2.0 started!

I 12:41:48 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2)

I 12:41:48 Total Physical Memory: 261,612 KB - Available: 38,772 KB

I 12:41:48 Initialising SPTI...

I 12:41:48 Searching for SCSI / ATAPI devices...

I 12:41:48 Found 1 DVD

Link to comment
Share on other sites

Your burner's firmware (A104) is quite old, so download here the latest firmware for your burner (make sure you're clicking the A117 link of the GSA-4120B line) and run the A117RPC1.EXE executable from the ZIP file you've downloaded. Remove any disc from your burner and close the tray before updating the firmware. Also, you'll have to reboot after updating.

Link to comment
Share on other sites

Also those disc you are using are not very good quality and we would never recommend anyone to use them,

 

I 12:45:10 Destination Media Type: DVD+R (Disc ID: CMC MAG-M01-00) (Speeds: 4x)

 

Here we recoomend quality media like Verbatim or Taiyo Yudens.....

Link to comment
Share on other sites

it is still liddat

 

I 15:46:51 ImgBurn Version 2.3.2.0 started!

I 15:46:51 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2)

I 15:46:51 Total Physical Memory: 261,612 KB - Available: 23,740 KB

I 15:46:51 Initialising SPTI...

I 15:46:51 Searching for SCSI / ATAPI devices...

I 15:46:52 Found 1 DVD

Link to comment
Share on other sites

  • 5 weeks later...

i m using verbatim now n firmware is the latest

 

I 14:53:03 Operation Started!

I 14:53:03 Source File: C:\Documents and Settings\plus\My Documents\Azureus Downloads\[bitTorment.net]_Tamagotchi_Party_On_Wii_NTSC_USA\[bitTorment.net]_Tamagotchi_Party_On_Wii_NTSC_USA.iso

I 14:53:03 Source File Sectors: 2,294,912 (MODE1/2048)

I 14:53:03 Source File Size: 4,699,979,776 bytes

I 14:53:03 Source File File System(s): None

I 14:53:03 Destination Device: [1:0:0] HL-DT-ST DVDRAM GSA-4120B A117 (D:) (ATA)

I 14:53:03 Destination Media Type: DVD+R (Disc ID: MCC-003-00) (Speeds: 4x, 8x, 12x)

I 14:53:03 Destination Media Sectors: 2,294,912

I 14:53:03 Write Mode: DVD

I 14:53:03 Write Type: DAO

I 14:53:03 Write Speed: 4x

I 14:53:03 Link Size: Auto

I 14:53:03 Test Mode: No

I 14:53:03 BURN-Proof: Enabled

I 14:53:31 Filling Buffer... (20 MB)

I 14:53:31 Writing LeadIn...

I 14:54:00 Writing Image... (LBA: 0 - 2294911)

I 15:08:17 Synchronising Cache...

W 15:08:44 Potential 'WaitImmediateIO' Deferred Error - (0/2) - Program Memory Area Update Failure

W 15:09:18 Potential 'WaitImmediateIO' Deferred Error - (0/2) - Program Memory Area Update Failure

E 15:09:27 Synchronise Cache Failed! - Reason: Program Memory Area Update Failure

I 15:09:27 Synchronising Cache (Last Attempt!)...

E 15:09:36 Synchronise Cache Failed! - Reason: Unknown (0xA0, 0x80)

I 15:09:36 Closing Track...

I 15:09:37 Finalising Disc...

E 15:09:59 Failed to Write Image!

E 15:09:59 Operation Failed! - Duration: 00:16:56

I 15:09:59 Average Write Rate: 5,361 KB/s (3.9x) - Maximum Write Rate: 5,587 KB/s (4.0x)

Link to comment
Share on other sites

someone please help me, im having the same problem:

 

I 15:00:29 ImgBurn Version 2.3.2.0 started!

I 15:00:29 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2)

I 15:00:29 Total Physical Memory: 2,095,040 KB - Available: 1,589,360 KB

I 15:00:29 Initialising SPTI...

I 15:00:29 Searching for SCSI / ATAPI devices...

I 15:00:29 Found 1 DVD-ROM and 1 DVD

Link to comment
Share on other sites

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.