Rockfang Posted November 16, 2007 Share Posted November 16, 2007 Hi, I have a dual layer dvd with info on it, but it isn't full. Can I add a file to it with ImgBurn? Below is the info from the status box while in write mode: SONY DVD RW DRU-810A 2.0d (USB)Current Profile: DVD+R DL Disc Information: Status: Incomplete Erasable: No Sessions: 2 Sectors: 3,715,392 Size: 7,609,122,816 bytes Time: 825:40:42 (MM:SS:FF) Supported Write Speeds: 2.4x DVD±R DL Boundary Information: L0 Data Zone Capacity: 2,086,912 Changeable: No TOC Information: Session 1... -> Track 01 (Mode 1, LBA: 0 - 3715391) -> LeadOut (LBA: 3715392) Physical Format Information (ADIP): Disc ID: CMC MAG-D01-00 Book Type: DVD+R DL Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 16,580,607 Last Physical Sector in Layer 0: 2,283,519 Physical Format Information (Last Recorded): Disc ID: CMC MAG-D01-00 Book Type: DVD-ROM Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 16,580,607 Last Physical Sector in Layer 0: 2,283,519 Layer Information: Layer 0 Sectors: 2,086,912 (56.17%) Layer 1 Sectors: 1,628,480 (43.83%) With the status as "incomplete", it appears like the disc is still writable. Any ideas? Link to comment Share on other sites More sharing options...
mmalves Posted November 16, 2007 Share Posted November 16, 2007 (edited) You can't do that with ImgBurn since ImgBurn doesn't support multisession in any way. You'll need a burning software that supports burning to multisession DVDs. Physical Format Information (ADIP):Disc ID: CMC MAG-D01-00 Backup the information that's on this disc while you still can. //edit Please read again Edited November 16, 2007 by mmalves Link to comment Share on other sites More sharing options...
Rockfang Posted November 16, 2007 Author Share Posted November 16, 2007 While I do appreciate the suggestion, your post does not answer my question. Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted November 16, 2007 Share Posted November 16, 2007 The answer was NO. Link to comment Share on other sites More sharing options...
Rockfang Posted November 16, 2007 Author Share Posted November 16, 2007 (edited) Thank you both for the help. Mmalves, my apologies. While I do see your wink now, I don't remember seeing the first line of your response. It might have been your avatar that distracted me. As a side note, is that in a FAQ/guide anywhere. If not, might I suggest that it gets added? Just a suggestion. Edited November 16, 2007 by Rockfang Link to comment Share on other sites More sharing options...
Shamus_McFartfinger Posted November 16, 2007 Share Posted November 16, 2007 Use the search thingy to look for "multisession". It's been mentioned more than once in the past. Link to comment Share on other sites More sharing options...
Rockfang Posted November 16, 2007 Author Share Posted November 16, 2007 Thanks for the tip. FYI, when I first saw that Western Decay graphic in your signature, I read the address as Western Daycare Metal. I thought it was an interesting combination. Link to comment Share on other sites More sharing options...
Recommended Posts