gordyffc Posted November 24, 2007 Share Posted November 24, 2007 Hi there, can anybody help me with an error I'm getting (see log file below). Never had any problems with my media or Burner before so if someone could shed some light on this and point me in the right direction that would be great. Cheer Gordy I 01:32:14 ImgBurn Version 2.3.2.0 started! I 01:32:14 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2) I 01:32:14 Total Physical Memory: 523,248 KB - Available: 270,204 KB W 01:32:14 Drive C:\ (FAT32) does not support single files > 4 GB in size. I 01:32:14 Initialising SPTI... I 01:32:14 Searching for SCSI / ATAPI devices... I 01:32:14 Found 1 DVD±RW! I 01:32:33 Operation Started! I 01:32:33 Source File: F:\Movies\SHRE_K_3_DVD_R.ISO I 01:32:33 Source File Sectors: 2,174,952 (MODE1/2048) I 01:32:33 Source File Size: 4,454,301,696 bytes I 01:32:33 Source File Volume Identifier: SH_3_DVD_R_NAVYR I 01:32:33 Source File Implementation Identifier: DVD Shrink I 01:32:33 Source File File System(s): ISO9660, UDF (1.02) I 01:32:33 Destination Device: [1:0:0] TSSTcorp CD/DVDW TS-L532A TI50 (E:) (ATA) I 01:32:33 Destination Media Type: DVD-R (Disc ID: CMC MAG. AE1) (Speeds: 2x, 4x, 8x) I 01:32:33 Destination Media Sectors: 2,298,496 I 01:32:33 Write Mode: DVD I 01:32:33 Write Type: DAO I 01:32:33 Write Speed: 2x I 01:32:33 Link Size: Auto I 01:32:33 Test Mode: No I 01:32:33 BURN-Proof: Enabled I 01:32:33 Filling Buffer... (20 MB) I 01:32:34 Writing LeadIn... I 01:32:44 Writing Image... (LBA: 0 - 2174951) I 01:59:40 Synchronising Cache... I 02:01:02 Image MD5: f38350e0ab20c2df5ecc01a38f29d849 I 02:01:02 Operation Successfully Completed! - Duration: 00:28:28 I 02:01:02 Average Write Rate: 2,693 KB/s (1.9x) - Maximum Write Rate: 2,860 KB/s (2.1x) I 02:01:02 Operation Started! I 02:01:02 Source Device: [1:0:0] TSSTcorp CD/DVDW TS-L532A TI50 (E:) (ATA) I 02:01:02 Source Media Type: DVD-R (Book Type: DVD-R) (Disc ID: CMC MAG. AE1) (Speeds: 2x, 4x, 8x) I 02:01:02 Image File: F:\Movies\SHRE_K_3_DVD_R.ISO I 02:01:02 Image File Sectors: 2,174,952 (MODE1/2048) I 02:01:02 Image File Size: 4,454,301,696 bytes I 02:01:02 Image File Volume Identifier: SH_3_DVD_R_NAVYR I 02:01:02 Image File Implementation Identifier: DVD Shrink I 02:01:02 Image File File System(s): ISO9660, UDF (1.02) I 02:01:02 Verifying Sectors... (LBA: 0 - 2174951) W 08:59:15 Failed to Read Sector 0 - Unrecovered Read Error Link to comment Share on other sites More sharing options...
volvofl10 Posted November 24, 2007 Share Posted November 24, 2007 Its your media ,I 01:32:33 Destination Media Type: DVD-R (Disc ID: CMC MAG. AE1) (Speeds: 2x, 4x, 8x) pure garbage im afraid . Its that bad that the burner that just wrote to it cant even read the disc back get some Taiyo yudens or verbatims Link to comment Share on other sites More sharing options...
gordyffc Posted November 24, 2007 Author Share Posted November 24, 2007 Its your media ,I 01:32:33 Destination Media Type: DVD-R (Disc ID: CMC MAG. AE1) (Speeds: 2x, 4x, 8x) pure garbage im afraid . Its that bad that the burner that just wrote to it cant even read the disc back get some Taiyo yudens or verbatims Thanks for the reply mate. It's yellow Datawrite DVD-R that I use and haven't had any problems in the past. In saying that I've just tried again and got the same message again. I'm half way through a spindle of 50 so maybe just come across a bad patch. I'll give it 1 more try. Cheers Gordy Link to comment Share on other sites More sharing options...
canary Posted January 17, 2008 Share Posted January 17, 2008 I'm using Yellow Datawrite DVD-R's (4.7GB x8) Are these really a big problem ? C Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted January 17, 2008 Share Posted January 17, 2008 Yes but yours are a different media code canary. It's the disc/media id code that's important, not the brand name. Link to comment Share on other sites More sharing options...
SerpentKing Posted January 17, 2008 Share Posted January 17, 2008 I 01:32:33 Write Speed: 2x i would burn them at 8 instead...which should give better result than 2x? Link to comment Share on other sites More sharing options...
spinningwheel Posted January 17, 2008 Share Posted January 17, 2008 I 01:32:33 Write Speed: 2x i would burn them at 8 instead...which should give better result than 2x? (Disc ID: CMC MAG. AE1) I'd shit-can them, learn my lesson about crap media and move on to the media that we recommend here on the IB forum. Link to comment Share on other sites More sharing options...
Recommended Posts