Jump to content

how bad ram affects dvd burns


c4fen01r

Recommended Posts

do you know which version you have is it 1 or 2 it may be etched onto the board or a sticker or even on the box and my god chaintech site is worse than dial u p

 

 

Do you mean if the Motherboard is a 9PJL1 or 9PJL2?

Everest shows it's "Chaintech 9PJL APOGEE / 9PJL1"

 

 

I'm posting CPU-Z report:

 

th_70537_mother_122_42lo.jpg

Link to comment
Share on other sites

that why I suggested a bios update, the temps and volts are screwy

 

chaintech should have stuck to vid cards, looks like they are getting out of them too

 

making flash memory instead

 

see if coretemp gives anything?

 

speedfan sucks

Link to comment
Share on other sites

I must have missed the bit where he listed cpu temp in everest

 

Actually Everest isn't listing CPU temp at all...

Even on the latest version I just installed! Maybe it needs some external plugins...

 

This is why I installed those other utilities (Speedfan and Nextsensor) to test CPU temp.

 

 

you should update bios I am busy downloading all the bios released for your board but @less than 2k a second on a 10 meg file It won't be here till next Tuesday :D

 

 

actually 1 hour 4 minutes time

 

Yes I know, I should update it... I've never done it since it seemed quite difficult, and I had problems finding the right update.

Thanks for your help, it's very kind of you... please could you give me the link for the bios updates?

 

Probably with a simple bios update I'll get more stable burn/verify processes with imgburn :)

Link to comment
Share on other sites

his bios is one of the intial ones from 2003

 

here is a one from 2005 but you will need to hunt out your mobo cd and find the flash utility, unless its built into the mobo you have . I see reference to something in readme about Autoflash V8.30

 

this is just the bios from 2005 in first link http://rapidshare.com/files/88353058/9PJL_2005.rar

 

And this is all the bios files from chaintech site I downloaded earlier @2k a sec, if someone else wants to take a gander at them to verify correct board etc.

 

All bios files for that mobo http://rapidshare.com/files/88354040/9PJLall.rar

Link to comment
Share on other sites

his bios is one of the intial ones from 2003

 

here is a one from 2005 but you will need to hunt out your mobo cd and find the flash utility, unless its built into the mobo you have . I see reference to something in readme about Autoflash V8.30

 

this is just the bios from 2005 in first link http://rapidshare.com/files/88353058/9PJL_2005.rar

 

And this is all the bios files from chaintech site I downloaded earlier @2k a sec, if someone else wants to take a gander at them to verify correct board etc.

 

All bios files for that mobo http://rapidshare.com/files/88354040/9PJLall.rar

 

Wow, thanks a lot! It's been very kind of you :)

I'll try to update my bios, and let you know...

(in the meanwhile, i'm in the middle of a massive defrag process... you never know, maybe it's just it)

Link to comment
Share on other sites

Therefore the ones I upped are the right ones :phew

 

I did not bother listing their website as its so slooooooooooow

 

and the only bios you can download is 10.4 meg as its classed as an archived mobo.

 

here is the flash util with instructions http://rapidshare.com/files/88391549/Awdflash.rar

 

 

 

If you ram is faulty under proper testing with memtest+ and advanced long tests with a few runs then your gonna have to replace your memory or try and updated bios to see if the updated bios resolves any issues your mobo may have with the ram you have.

 

Faulty memory after all is broken.

Link to comment
Share on other sites

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.