Ferretti Posted February 27, 2008 Share Posted February 27, 2008 Hi, I am having problems burning a Dual Layer ISO. I am assuming it is probably the disks I have (Phillips DVD+R DL)? Anyway, here is the log. ; //****************************************\\ ; ImgBurn Version 2.4.0.0 - Log ; Wednesday, 27 February 2008, 20:22:38 ; \\****************************************// ; ; I 20:01:07 ImgBurn Version 2.4.0.0 started! I 20:01:07 Microsoft Windows Vista Ultimate Edition (6.0, Build 6001 : Service Pack 1, v.668) I 20:01:07 Total Physical Memory: 2,094,868 KB - Available: 791,680 KB I 20:01:09 Initialising SPTI... I 20:01:09 Searching for SCSI / ATAPI devices... I 20:01:09 Found 1 DVD±RW! I 20:02:37 Operation Started! I 20:02:37 Source File: D:\Downloads\GAMES\Wii\Smash Bros\cvn-dsbx.iso I 20:02:37 Source File Sectors: 4,155,840 (MODE1/2048) I 20:02:37 Source File Size: 8,511,160,320 bytes I 20:02:37 Source File Volume Identifier: Super Smash Bros. Brawl I 20:02:37 Source File File System(s): None I 20:02:37 Destination Device: [3:0:0] AOPEN DUW1608/ARR A070 (E:) (ATA) I 20:02:37 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67) (Speeds: 4x) I 20:02:37 Destination Media Sectors: 4,173,824 I 20:02:37 Write Mode: DVD I 20:02:37 Write Type: DAO I 20:02:37 Write Speed: 1x I 20:02:37 Link Size: Auto I 20:02:37 Test Mode: No I 20:02:37 OPC: Yes I 20:02:37 BURN-Proof: Enabled I 20:02:37 Book Type Setting: DVD+R W 20:03:31 Optimum Power Calibration Failed! - Reason: Unknown (0x91, 0xC1) W 20:03:31 Retrying (1)... W 20:05:44 Optimum Power Calibration Failed! - Reason: Unknown (0x91, 0xC1) I 20:05:44 Optimal L0 Data Zone Capacity: 2,077,920 I 20:05:44 Optimal L0 Data Zone Method: ECC Block Boundary W 20:08:32 Failed to set L0 Data Zone Capacity! W 20:08:32 Reason: Unknown (0x91, 0xC1) I 20:08:32 Filling Buffer... (40 MB) I 20:08:33 Writing LeadIn... W 20:09:04 Failed to Write Sectors 0 - 31 - Unknown (0x91, 0xC1) W 20:09:04 Retrying (1 of 20)... W 20:09:32 Retry Failed - Unknown (0x91, 0xC1) W 20:09:32 Retrying (2 of 20)... W 20:10:00 Retry Failed - Unknown (0x91, 0xC1) W 20:10:00 Retrying (3 of 20)... W 20:10:30 Retry Failed - Unknown (0x91, 0xC1) W 20:10:30 Retrying (4 of 20)... W 20:10:59 Retry Failed - Unknown (0x91, 0xC1) W 20:10:59 Retrying (5 of 20)... W 20:11:28 Retry Failed - Unknown (0x91, 0xC1) W 20:11:28 Retrying (6 of 20)... W 20:11:57 Retry Failed - Unknown (0x91, 0xC1) W 20:11:57 Retrying (7 of 20)... W 20:12:29 Retry Failed - Unknown (0x91, 0xC1) W 20:12:29 Retrying (8 of 20)... W 20:13:02 Retry Failed - Unknown (0x91, 0xC1) W 20:13:02 Retrying (9 of 20)... W 20:13:27 Retry Failed - Unknown (0x91, 0xC1) W 20:13:27 Retrying (10 of 20)... W 20:13:52 Retry Failed - Unknown (0x91, 0xC1) W 20:13:52 Retrying (11 of 20)... W 20:14:22 Retry Failed - Unknown (0x91, 0xC1) W 20:14:22 Retrying (12 of 20)... W 20:14:50 Retry Failed - Unknown (0x91, 0xC1) W 20:14:50 Retrying (13 of 20)... W 20:15:17 Retry Failed - Unknown (0x91, 0xC1) W 20:15:17 Retrying (14 of 20)... W 20:15:48 Retry Failed - Unknown (0x91, 0xC1) W 20:15:48 Retrying (15 of 20)... W 20:16:14 Retry Failed - Unknown (0x91, 0xC1) W 20:16:14 Retrying (16 of 20)... W 20:16:41 Retry Failed - Unknown (0x91, 0xC1) W 20:16:41 Retrying (17 of 20)... W 20:17:06 Retry Failed - Unknown (0x91, 0xC1) W 20:17:06 Retrying (18 of 20)... W 20:17:35 Retry Failed - Unknown (0x91, 0xC1) W 20:17:35 Retrying (19 of 20)... W 20:18:01 Retry Failed - Unknown (0x91, 0xC1) W 20:18:01 Retrying (20 of 20)... W 20:18:27 Retry Failed - Unknown (0x91, 0xC1) W 20:21:43 Retrying (21)... W 20:22:12 Retry Failed - Unknown (0x91, 0xC1) E 20:22:16 Failed to Write Sectors 0 - 31 - Unknown (0x91, 0xC1) I 20:22:16 Synchronising Cache... I 20:22:28 Closing Track... I 20:22:29 Finalising Disc... E 20:22:30 Failed to Write Image! E 20:22:30 Operation Failed! - Duration: 00:19:53 I 20:22:30 Average Write Rate: N/A - Maximum Write Rate: N/A I 20:22:38 Close Request Acknowledged I 20:22:38 Closing Down... I 20:22:38 Shutting down SPTI... I 20:22:38 ImgBurn closed! Thanks for any help you can give! Link to comment Share on other sites More sharing options...
mmalves Posted February 27, 2008 Share Posted February 27, 2008 I 20:02:37 Destination Device: [3:0:0] AOPEN DUW1608/ARR A070 (E:) (ATA)I 20:02:37 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67) (Speeds: 4x) Update your burner's firmware to the latest version (A111) and try again. Failing that, get Verabtim DVD+R DLs 2.4x MKM-001 Made In Singapore and it should work Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted February 27, 2008 Share Posted February 27, 2008 Try a firmware update http://download.aopen.com.tw/userdownload_...del=DUW1608/ARR EDIT: Beaten! Link to comment Share on other sites More sharing options...
Ferretti Posted February 27, 2008 Author Share Posted February 27, 2008 hi, I just tried to flash my drive to the latest firmware but I have run into issues. The flasher seems to have crashed! not good I assume. What should I do? Here is an image. http://img85.imageshack.us/img85/7145/ohnoxu4.jpg Thanks Link to comment Share on other sites More sharing options...
mmalves Posted February 27, 2008 Share Posted February 27, 2008 Did you remove any disc that was inside and closed the tray before flashing? Link to comment Share on other sites More sharing options...
Ferretti Posted February 27, 2008 Author Share Posted February 27, 2008 Also to continue the original problem I just tried to burn the disk on another PC, here is the log of the error. I am assuming this is due to a bad disk, although it is kinda odd it happened on exactly 50%, right where it switches to layer 2. I 20:18:41 ImgBurn Version 2.4.0.0 started! I 20:18:41 Microsoft Windows Vista Home Premium Edition (6.0, Build 6000) I 20:18:41 Total Physical Memory: 1,308,928 KB - Available: 653,660 KB I 20:18:45 Initialising SPTI... I 20:18:45 Searching for SCSI / ATAPI devices... I 20:18:45 Found 1 CD-RW and 1 DVD±RW! I 20:34:58 Operation Started! I 20:34:58 Source File: C:\Users\John\Desktop\cvn-dsbx.iso I 20:34:58 Source File Sectors: 4,155,840 (MODE1/2048) I 20:34:58 Source File Size: 8,511,160,320 bytes I 20:34:58 Source File Volume Identifier: Super Smash Bros. Brawl I 20:34:58 Source File File System(s): None I 20:34:58 Destination Device: [1:0:0] TSSTcorp CD/DVDW SH-W162C TS10 (D:) (ATA) I 20:34:58 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67) (Speeds: 2.4x, 4x, 6x, 8x) I 20:34:58 Destination Media Sectors: 4,173,824 I 20:34:58 Write Mode: DVD I 20:34:58 Write Type: DAO I 20:34:58 Write Speed: MAX I 20:34:58 Link Size: Auto I 20:34:58 Test Mode: No I 20:34:58 OPC: Yes I 20:34:58 BURN-Proof: Enabled W 20:35:25 DeviceIoControl(FSCTL_LOCK_VOLUME) Failed! - Reason: Access is denied. I 20:35:28 Book Type Setting: DVD-ROM I 20:36:11 Optimal L0 Data Zone Capacity: 2,077,920 I 20:36:11 Optimal L0 Data Zone Method: ECC Block Boundary I 20:36:15 Filling Buffer... (40 MB) I 20:36:16 Writing LeadIn... I 20:36:18 Writing Session 1 of 1... (1 Track, LBA: 0 - 4155839) I 20:36:18 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 4155839) I 20:36:18 Writing Layer 0... (LBA: 0 - 2077919) I 20:44:44 Writing Layer 1... (LBA: 2077920 - 4155839) W 20:44:46 Failed to Write Sectors 2079424 - 2079455 - Write Error W 20:44:46 Retrying (1 of 20)... W 20:44:46 Retry Failed - Invalid Address For Write W 20:44:46 Retrying (2 of 20)... W 20:44:46 Retry Failed - Invalid Address For Write W 20:44:46 Retrying (3 of 20)... W 20:44:46 Retry Failed - Invalid Address For Write W 20:44:46 Retrying (4 of 20)... W 20:44:46 Retry Failed - Invalid Address For Write W 20:44:46 Retrying (5 of 20)... W 20:44:46 Retry Failed - Invalid Address For Write W 20:44:46 Retrying (6 of 20)... W 20:44:46 Retry Failed - Invalid Address For Write W 20:44:46 Retrying (7 of 20)... W 20:44:46 Retry Failed - Invalid Address For Write W 20:44:46 Retrying (8 of 20)... W 20:44:46 Retry Failed - Invalid Address For Write W 20:44:46 Retrying (9 of 20)... W 20:44:47 Retry Failed - Invalid Address For Write W 20:44:47 Retrying (10 of 20)... W 20:44:47 Retry Failed - Invalid Address For Write W 20:44:47 Retrying (11 of 20)... W 20:44:47 Retry Failed - Invalid Address For Write W 20:44:47 Retrying (12 of 20)... W 20:44:47 Retry Failed - Invalid Address For Write W 20:44:47 Retrying (13 of 20)... W 20:44:47 Retry Failed - Invalid Address For Write W 20:44:47 Retrying (14 of 20)... W 20:44:47 Retry Failed - Invalid Address For Write W 20:44:47 Retrying (15 of 20)... W 20:44:47 Retry Failed - Invalid Address For Write W 20:44:47 Retrying (16 of 20)... W 20:44:47 Retry Failed - Invalid Address For Write W 20:44:47 Retrying (17 of 20)... W 20:44:47 Retry Failed - Invalid Address For Write W 20:44:47 Retrying (18 of 20)... W 20:44:47 Retry Failed - Invalid Address For Write W 20:44:47 Retrying (19 of 20)... W 20:44:47 Retry Failed - Invalid Address For Write W 20:44:47 Retrying (20 of 20)... W 20:44:47 Retry Failed - Invalid Address For Write W 20:51:42 Retrying (21)... W 20:51:42 Retry Failed - Invalid Address For Write W 20:51:44 Retrying (22)... W 20:51:44 Retry Failed - Invalid Address For Write W 20:51:45 Retrying (23)... W 20:51:45 Retry Failed - Invalid Address For Write W 20:51:45 Retrying (24)... W 20:51:45 Retry Failed - Invalid Address For Write W 20:51:46 Retrying (25)... W 20:51:46 Retry Failed - Invalid Address For Write E 20:51:47 Failed to Write Sectors 2079424 - 2079455 - Write Error E 20:51:47 Next Writable Address: 2078942 I 20:51:47 Synchronising Cache... I 20:51:55 Closing Track... I 20:52:01 Finalising Disc... W 20:52:22 Potential 'WaitImmediateIO' Deferred Error - (99%, 0/3) - Session Fixation Error Writing Lead Out W 20:52:22 Finalise Disc Failed! - Reason: Session Fixation Error Writing Lead Out W 20:52:22 Retrying (2 of 3)... W 20:53:27 Potential 'WaitImmediateIO' Deferred Error - (94%, 0/3) - Session Fixation Error Writing Lead Out W 20:53:27 Retry Failed - Session Fixation Error Writing Lead Out W 20:53:27 Retrying (3 of 3)... W 20:55:40 Potential 'WaitImmediateIO' Deferred Error - (77%, 0/3) - Session Fixation Error Writing Lead In W 20:55:40 Retry Failed - Session Fixation Error Writing Lead In W 20:55:40 Retrying (4 of 3)... W 20:56:24 Potential 'WaitImmediateIO' Deferred Error - (26%, 0/3) - Session Fixation Error Writing Lead In W 20:56:25 Retry Failed - Session Fixation Error Writing Lead In E 21:00:32 Finalise Disc Failed! - Reason: Session Fixation Error Writing Lead Out I 21:00:32 Finalising Disc (Last Attempt!)... E 21:06:15 Finalise Disc Failed! - Reason: Session Fixation Error Writing Lead In E 21:06:15 Failed to Write Image! I 21:06:16 Exporting Graph Data... I 21:06:16 Graph Data File: C:\Users\John\AppData\Roaming\ImgBurn\IBG Files\TSSTcorp_CD-DVDW_SH-W162C_TS10_27-FEBRUARY-2008_20-34_RICOHJPN-D01-67_MAX.ibg I 21:06:16 Export Successfully Completed! E 21:06:16 Operation Failed! - Duration: 00:31:17 I 21:06:16 Average Write Rate: 4,481 KB/s (3.2x) - Maximum Write Rate: 11,239 KB/s (8.1x) Thanks again Link to comment Share on other sites More sharing options...
Ferretti Posted February 27, 2008 Author Share Posted February 27, 2008 Sorry for the double post, my other post isn't up to edit yet. Yes, I removed the disk like it asked me to, it didn't give any other instructions than that. Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted February 27, 2008 Share Posted February 27, 2008 Is the drive light flashing on the AOPEN? It looks like it actually wrote the firmware code, just the checking got stuck... so hopefully if you do have to reset the PC it'll be ok. Maybe try flashing it again? As for burning in the other PC, slow it down to 2.4x and update to TS12 firmware http://samsungoms.com/eng/firmware/fwdownl...ode=&os_no= Link to comment Share on other sites More sharing options...
Ferretti Posted February 27, 2008 Author Share Posted February 27, 2008 Nothing is flashing on the drive, looks pretty idle. Windows can see it too. I will try to run the flashing software again. Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted February 27, 2008 Share Posted February 27, 2008 load up imgburn and see if it picks up the new firmware version Link to comment Share on other sites More sharing options...
Ferretti Posted February 27, 2008 Author Share Posted February 27, 2008 Just rebooted windows as the drive wasn't working, now windows only sees "CD Drive", ImgBurn sees "Found 1 unknown" and the patcher sees cdrom0: RICOH Ploader2 REGULUS2.01 even though the only disk drive in my PC is the AOpen one. Windows just popped up a message saying new hardware installed and I have to restart so will try that now. Link to comment Share on other sites More sharing options...
Ferretti Posted February 27, 2008 Author Share Posted February 27, 2008 Well that did nothing, I'm trying to flash this RICOH one with the AOpen flasher now. Link to comment Share on other sites More sharing options...
Ferretti Posted February 27, 2008 Author Share Posted February 27, 2008 Nothing, AOpen flasher just crashes whilst tring to erase the memory of it. http://club.aopen.com.tw/forum/viewmessage...MessageID=78216 Looks like that guy got it to work, but he doesn't say how and that was 3 years ago. Link to comment Share on other sites More sharing options...
Cynthia Posted February 27, 2008 Share Posted February 27, 2008 Do you have the burner attached as master in the settings (switches) at the back of the burner? Link to comment Share on other sites More sharing options...
mmalves Posted February 27, 2008 Share Posted February 27, 2008 Reboot in Safe Mode (keep pressing F8 until you get the Safe Mode option) and try again. //edit: Too slow Link to comment Share on other sites More sharing options...
Ferretti Posted February 27, 2008 Author Share Posted February 27, 2008 Yes pretty sure it is the master, it is the only IDE on that channel and the only disk drive in my system so should be anyway. Trying in safe mode now. Link to comment Share on other sites More sharing options...
Ferretti Posted February 27, 2008 Author Share Posted February 27, 2008 Doesn't look like safe mode will work either, the program runs and thebar along the bottom increases but it still says erasing flash ROM when it gets to the end and stops responding. Any other ideas? What If I tried in XP? Link to comment Share on other sites More sharing options...
dontasciime Posted February 27, 2008 Share Posted February 27, 2008 would be worth dropping to dos and seeing if you could flash it in xp at least try xp safe mode as well, change the Ide cable switch drive in bios to use pio mode as well Link to comment Share on other sites More sharing options...
Ferretti Posted February 27, 2008 Author Share Posted February 27, 2008 I dont have an XP box to hand so will have to try that tomorrow. I will try the BIOS thing now. Link to comment Share on other sites More sharing options...
Ferretti Posted February 27, 2008 Author Share Posted February 27, 2008 Well I just had a look in BIOS, found an option for Primary master and Primary slave PIO set to auto. The other options were Mode 0, 1, 2, 3 or 4. Didn't know which to choose. PLus, the drive is theSecondary master, with my HDD being the Primary master. Link to comment Share on other sites More sharing options...
Ferretti Posted February 27, 2008 Author Share Posted February 27, 2008 Right, I give up, just ordered a new drive. Link to comment Share on other sites More sharing options...
Recommended Posts