Jump to content

DVD won't verify


alouette99

Recommended Posts

I am trying to burn an ISO image to DVD. It goes through the entire write process successfully but will not verify. Any help is appreciated. I didn/'t save the write log but here is the verify log:

 

I 14:31:17 ImgBurn Version 1.1.0.0 started!

I 14:31:17 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2)

I 14:31:17 Initialising SPTI...

I 14:31:17 Searching for SCSI / ATAPI devices...

I 14:31:17 Found 1 DVD-RW!

I 14:37:44 Operation Started!

I 14:37:44 Source File: C:\PROGRAM FILES\ANDROIDNEWS\DOWNLOAD\DVD\SERENITY.ISO

I 14:37:44 Source File Sectors: 1,787,858 (MODE1/2048)

I 14:37:44 Source File Size: 3,661,533,184 bytes

I 14:37:44 Source File Implementation Identifier: DVD Shrink

I 14:37:44 Destination Device: [1:0:0] TOSHIBA DVD-ROM SD-R6012 1S31 (F:) (ATA)

I 14:37:44 Destination Media Type: DVD-ROM

I 14:37:44 Destination Media Sectors: 2,297,888

I 14:37:44 Write Mode: DVD

I 14:37:44 Write Type: DAO

I 14:37:44 Write Speed: MAX

I 14:37:44 Link Size: Auto

I 14:37:44 Test Mode: No

I 14:37:44 BURN-Proof: Enabled

I 14:37:44 Filling Buffer...

I 14:37:51 Writing LeadIn...

W 14:37:51 Failed to Write Sectors 0 - 31 - Command Sequence Error

W 14:37:51 Retrying (1 of 20)...

W 14:37:51 Retry Failed - Command Sequence Error

W 14:37:51 Retrying (2 of 20)...

W 14:37:51 Retry Failed - Command Sequence Error

W 14:37:51 Retrying (3 of 20)...

W 14:37:51 Retry Failed - Command Sequence Error

W 14:37:51 Retrying (4 of 20)...

W 14:37:51 Retry Failed - Command Sequence Error

W 14:37:51 Retrying (5 of 20)...

W 14:37:51 Retry Failed - Command Sequence Error

W 14:37:51 Retrying (6 of 20)...

W 14:37:51 Retry Failed - Command Sequence Error

W 14:37:51 Retrying (7 of 20)...

W 14:37:51 Retry Failed - Command Sequence Error

W 14:37:51 Retrying (8 of 20)...

W 14:37:51 Retry Failed - Command Sequence Error

W 14:37:51 Retrying (9 of 20)...

W 14:37:51 Retry Failed - Command Sequence Error

W 14:37:51 Retrying (10 of 20)...

W 14:37:51 Retry Failed - Command Sequence Error

W 14:37:51 Retrying (11 of 20)...

W 14:37:51 Retry Failed - Command Sequence Error

W 14:37:51 Retrying (12 of 20)...

W 14:37:51 Retry Failed - Command Sequence Error

W 14:37:51 Retrying (13 of 20)...

W 14:37:51 Retry Failed - Command Sequence Error

W 14:37:51 Retrying (14 of 20)...

W 14:37:51 Retry Failed - Command Sequence Error

W 14:37:51 Retrying (15 of 20)...

W 14:37:51 Retry Failed - Command Sequence Error

W 14:37:51 Retrying (16 of 20)...

W 14:37:51 Retry Failed - Command Sequence Error

W 14:37:51 Retrying (17 of 20)...

W 14:37:51 Retry Failed - Command Sequence Error

W 14:37:51 Retrying (18 of 20)...

W 14:37:51 Retry Failed - Command Sequence Error

W 14:37:51 Retrying (19 of 20)...

W 14:37:51 Retry Failed - Command Sequence Error

W 14:37:51 Retrying (20 of 20)...

W 14:37:51 Retry Failed! - Command Sequence Error

E 14:38:18 Failed to Write Sectors 0 - 31 - Command Sequence Error

I 14:38:18 Synchronising Cache...

E 14:38:19 Failed to Write Image!

E 14:38:19 Operation Failed! - Duration: 00:00:34

I 14:38:19 Average Write Rate: N/A - Maximum Write Rate: N/A

 

I've tried with two different blank DVD's :(

Please advise

Link to comment
Share on other sites

Eh?!

 

Clearly that's the log of it FAILING to WRITE a disc - and it's not going to verify until it's written something properly!

 

There are few things that look odd in that log but starting at the beginning.... go and update your drives firmware.

 

http://forum.rpc1.org/dl_firmware.php?download_id=750

 

Get the 1S34 one.

Link to comment
Share on other sites

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.