Jump to content

ImgBurn I/O error


IZON
 Share

Recommended Posts

Recently I started to get I/O errors when I'm verifying the discs.

My I/o error is:

 

ScsiStatus: 0x02

interpretation: check condition

 

CDB: 28 00 00 22 34 C0 00 00 01 00

Interpretation: Read (10) - Sector: 2241728

 

Sense Area: F0 00 03 00 22 34 C0 0E 00 00 00 00 11 05 00 00 00 00 76 14 00 00

Interpretation: L-EC Uncorrectable Error

 

Why does this show up and what could I do to solve this?

Link to comment
Share on other sites

IZON, This looks like an error due to bad media. It may burn alright but when verifying IMGburn can't read back from this certain sector. What type of media are you burning to? Could you post a log for us. The burn't media may still play alright in a stand alone dvd player because the drive in your computer is more sensitive then stand alones. :/ Might be an idea to start using better media if this is the prob, post a log please.

Link to comment
Share on other sites

IZON, This looks like an error due to bad media. It may burn alright but when verifying IMGburn can't read back from this certain sector. What type of media are you burning to? Could you post a log for us. The burn't media may still play alright in a stand alone dvd player because the drive in your computer is more sensitive then stand alones. :/ Might be an idea to start using better media if this is the prob, post a log please.

 

I Trashed the brand when I opened the cake"box" But I never ever had any problems to burn on these disc before.

All info I can get is:

 

DVD-R M-803

 

Ohh I found a program named DVD identifier maybe it will help?

 

 

----------------------------------------------------------------------------

Unique Disc Identifier : [DVD-R:MCC 02RG20 ]

----------------------------------------------------------------------------

Disc & Book Type : [DVD-R] - [DVD-R]

Manufacturer Name : [Mitsubishi Chemical Corp.]

Manufacturer ID : [MCC 02RG20 ]

Blank Disc Capacity : [2,298,496 Sectors = 4.71 GB (4.38 GiB)]

----------------------------------------------------------------------------

** INFO : Drive = ASUS DRW-1608P2 [FW 1.17]

** INFO : Write Capabilities = DVD+R DVD+R-DL DVD+RW

** INFO : Write Capabilities = DVD-R DVD-R-DL DVD-RW

** INFO : Disc = [DVD-R:MCC 02RG20 ]

** INFO : Reference Speed : 1x DVD = 1385 kBps

** INFO : An Writeable Disc Is Recommended For Accurate Results

** INFO : Write Speeds (Supported By This Drive On This Disc) Listed Below

 

** INFO : GET PERFORMANCE Write Speed Descriptor(s)

Descriptor #1 = 11080 kBps ( 8.00x) - [CLV/Non-Pure CAV]

Descriptor #2 = 8310 kBps ( 6.00x) - [CLV/Non-Pure CAV]

Descriptor #3 = 5540 kBps ( 4.00x) - [CLV/Non-Pure CAV]

 

** INFO : MODE SENSE Write Speed Descriptor(s) [Legacy Command]

** WARNING : MODE SENSE Is Obsolete And Not Always Properly Supported

Descriptor #1 = 11080 kBps ( 8.00x) - [CLV/Non-Pure CAV]

Descriptor #2 = 8310 kBps ( 6.00x) - [CLV/Non-Pure CAV]

Descriptor #3 = 5540 kBps ( 4.00x) - [CLV/Non-Pure CAV]

----------------------------------------------------------------------------

** INFO : Hex Dump Of 'Media Code'-Block Listed Below

** INFO : 4-Byte Header Preceding 'Media Code'-Block Discarded

** INFO : Format 0Eh - Pre-Recorded Information In Lead-In

0000 : 01 40 c1 fd 9e d8 52 00 02 85 0d 10 88 9a 80 00 .@....R.........

0010 : 03 4d 43 43 20 30 32 00 04 52 47 32 30 20 20 00 .MCC 02..RG20 .

0020 : 05 88 80 00 00 00 02 00 06 09 0d 13 87 78 80 00 .............x..

0030 : 07 88 80 00 00 00 00 00 08 05 15 0d 10 0b 0a 00 ................

0040 : 09 98 08 0f 0b 78 88 00 0a 80 00 00 00 00 10 00 .....x..........

0050 : 0b 07 19 15 a7 88 75 00 0c 99 bc aa a2 20 22 00 ......u...... ".

0060 : 0d 00 00 d0 00 00 00 00 00 00 ..........

 

** INFO : Hex Dump Of 'Control Data Zone'-Block Listed Below

** INFO : 4-Byte Header Preceding 'CDZ'-Block Discarded

** INFO : Format 10h - Physical Format Information Of Control Data Zone

0000 : 25 0f 02 00 00 03 00 00 00 26 12 7f 00 00 00 00 %........&......

----------------------------------------------------------------------------

[ DVD Identifier V4.2.0 - http://DVD.Identifier.CDfreaks.com ]

----------------------------------------------------------------------------

Link to comment
Share on other sites

IZON, This looks like an error due to bad media. It may burn alright but when verifying IMGburn can't read back from this certain sector. What type of media are you burning to? Could you post a log for us. The burn't media may still play alright in a stand alone dvd player because the drive in your computer is more sensitive then stand alones. :/ Might be an idea to start using better media if this is the prob, post a log please.

 

I Trashed the brand when I opened the cake"box" But I never ever had any problems to burn on these disc before.

All info I can get is:

 

DVD-R M-803

 

Ohh I found a program named DVD identifier maybe it will help?

 

 

----------------------------------------------------------------------------

Unique Disc Identifier : [DVD-R:MCC 02RG20 ]

----------------------------------------------------------------------------

Disc & Book Type : [DVD-R] - [DVD-R]

Manufacturer Name : [Mitsubishi Chemical Corp.]

Manufacturer ID : [MCC 02RG20 ]

Blank Disc Capacity : [2,298,496 Sectors = 4.71 GB (4.38 GiB)]

----------------------------------------------------------------------------

** INFO : Drive = ASUS DRW-1608P2 [FW 1.17]

** INFO : Write Capabilities = DVD+R DVD+R-DL DVD+RW

** INFO : Write Capabilities = DVD-R DVD-R-DL DVD-RW

** INFO : Disc = [DVD-R:MCC 02RG20 ]

** INFO : Reference Speed : 1x DVD = 1385 kBps

** INFO : An Writeable Disc Is Recommended For Accurate Results

** INFO : Write Speeds (Supported By This Drive On This Disc) Listed Below

 

** INFO : GET PERFORMANCE Write Speed Descriptor(s)

Descriptor #1 = 11080 kBps ( 8.00x) - [CLV/Non-Pure CAV]

Descriptor #2 = 8310 kBps ( 6.00x) - [CLV/Non-Pure CAV]

Descriptor #3 = 5540 kBps ( 4.00x) - [CLV/Non-Pure CAV]

 

** INFO : MODE SENSE Write Speed Descriptor(s) [Legacy Command]

** WARNING : MODE SENSE Is Obsolete And Not Always Properly Supported

Descriptor #1 = 11080 kBps ( 8.00x) - [CLV/Non-Pure CAV]

Descriptor #2 = 8310 kBps ( 6.00x) - [CLV/Non-Pure CAV]

Descriptor #3 = 5540 kBps ( 4.00x) - [CLV/Non-Pure CAV]

----------------------------------------------------------------------------

** INFO : Hex Dump Of 'Media Code'-Block Listed Below

** INFO : 4-Byte Header Preceding 'Media Code'-Block Discarded

** INFO : Format 0Eh - Pre-Recorded Information In Lead-In

0000 : 01 40 c1 fd 9e d8 52 00 02 85 0d 10 88 9a 80 00 .@....R.........

0010 : 03 4d 43 43 20 30 32 00 04 52 47 32 30 20 20 00 .MCC 02..RG20 .

0020 : 05 88 80 00 00 00 02 00 06 09 0d 13 87 78 80 00 .............x..

0030 : 07 88 80 00 00 00 00 00 08 05 15 0d 10 0b 0a 00 ................

0040 : 09 98 08 0f 0b 78 88 00 0a 80 00 00 00 00 10 00 .....x..........

0050 : 0b 07 19 15 a7 88 75 00 0c 99 bc aa a2 20 22 00 ......u...... ".

0060 : 0d 00 00 d0 00 00 00 00 00 00 ..........

 

** INFO : Hex Dump Of 'Control Data Zone'-Block Listed Below

** INFO : 4-Byte Header Preceding 'CDZ'-Block Discarded

** INFO : Format 10h - Physical Format Information Of Control Data Zone

0000 : 25 0f 02 00 00 03 00 00 00 26 12 7f 00 00 00 00 %........&......

----------------------------------------------------------------------------

[ DVD Identifier V4.2.0 - http://DVD.Identifier.CDfreaks.com ]

----------------------------------------------------------------------------

 

 

 

 

 

Go here http://forum.rpc1.org/dl_result.php?kaj=1&isces for a firmware update the current for your machine is 1.37. Try updating your burner and see what happens.

Link to comment
Share on other sites

 

Go here http://forum.rpc1.org/dl_result.php?kaj=1&isces for a firmware update the current for your machine is 1.37. Try updating your burner and see what happens.

 

Yes I've found out that my firmware was old just before I read your message.

I shall install it now and see if I gopt any further problems.

 

Could you find out some information on my dvd discs?

Are they bad?

Link to comment
Share on other sites

You can crossflash the Asus drive you have to a Pioneer 110

 

See this post

 

http://club.cdfreaks.com/showthread.php?t=...ASUS+DRW-1608P2

 

I'd recommend like the post says flashing to either the stock

Buffalo A10XL 8.37 f/w or TDB patched 8.37 f/w (Youll need DVRFlash2.2)

 

I have quite a few A10XL's with TDB 8.37 f/w and while I haven't burnt any MCC02RG20 disks as i dont use em, I do burn the MCC03RG20's (16speed disks instead of 8speed) which are excellent quality and give excellent results.

Link to comment
Share on other sites

Btw are there only dumb do burn in 1x or something like that (low speed) instead of using the MAX speed?

wich speed should I burn in?

 

It really depends on your media/drive and f/w

 

I burn TYG02s at 4 speed generally as i get the best results form my particular set up

 

I burn MCC03RG20 at 8 speed generally as i get the best results form my particular set up

 

They will both burn at MAX (12X & 16X) but after many trials i have found the quality scans are not as good.

 

At the end of the day its just personal choice

Link to comment
Share on other sites

i'm getting the same error!

I just bought a 25 dvd-r pack, the 2 first worked fine but the rest (23) is pissing me off

it says that cant write the lead in and show this error

I 20:31:02 Writing LeadIn...

W 20:31:13 Failed to Write Sectors 0 - 31 - Write Error

W 20:31:13 Retrying (1 of 20)...

W 20:31:13 Retry Failed - Write Error

W 20:31:13 Retrying (2 of 20)...

wtf is going on? i bet its the media

i updated my dvd burner driver, aspi, asapi i aslo tryed to burn on linux..

 

and now all of a sudden i got this in the same dvd:

 

I 20:31:02 Writing LeadIn...

W 20:31:13 Failed to Write Sectors 0 - 31 - Write Error

W 20:31:13 Retrying (1 of 20)...

W 20:31:13 Retry Failed - Write Error

W 20:31:13 Retrying (2 of 20)...

W 20:31:23 Retry Failed - Write Error

W 20:31:23 Retrying (3 of 20)...

W 20:31:23 Retry Failed - Write Error

W 20:31:23 Retrying (4 of 20)...

W 20:31:32 Retry Failed - Write Error

W 20:31:32 Retrying (5 of 20)...

W 20:31:32 Retry Failed - Write Error

W 20:31:32 Retrying (6 of 20)...

I 20:32:00 Writing LeadIn...

I 20:32:00 Writing Image...

I 20:42:53 Synchronising Cache...

 

?????????

what can be wrong?

 

thanks

Link to comment
Share on other sites

 Share

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.