Jump to content
Sign in to follow this  
KISSMAD

Problems with Pioneer DVR-105 and XP SP3

Recommended Posts

I'm using the current version 2.4.1.0 on Win XP SP3 and I can no longer burn any DVDs with my Pioneer DVD-RW DVR-105 1.33. I even went back to version 2.4.0.0 and I still got the same errors. I even updated the burner firmware but I still had the same problem.

 

Reason: Cannot Write Medium - Incompatible Format

Retry Failed - Reason: Invalid Address For Write

 

However I can still burn on my PIONEER DVD-RW DVR-108 1.04 but I don't like using it for burning. I always using my 105 for burning.

 

; //****************************************\\

; ImgBurn Version 2.4.1.0 - Log

; Monday, 19 May 2008, 19:55:14

; \\****************************************//

;

;

I 15:43:52 ImgBurn Version 2.4.1.0 started!

I 15:43:52 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 3)

I 15:43:52 Total Physical Memory: 523,800 KB - Available: 267,284 KB

I 15:43:52 Initialising SPTI...

I 15:43:52 Searching for SCSI / ATAPI devices...

I 15:43:52 Found 1 DVD-RW and 1 DVD

Edited by KISSMAD

Share this post


Link to post
Share on other sites

Please make sure you're using the latest ImgBurn, downloaded from the ImgBurn.com mirror.

 

I think your Pioneer DVR-105 burner is worn out. Make sure you have the latest firmware on your Pioneer DVR-108 burner and you should be able to use it :)

Share this post


Link to post
Share on other sites

Give the drive a clean and try some Verbatim / Taiyo Yuden media (they're better than the TTH02 stuff you're using).

Share this post


Link to post
Share on other sites

I used Nero and it burned without any problems with XP SP3. So the problem is not my drive or media.

Share this post


Link to post
Share on other sites

The drive is what returned that error code. If there wasn't a 'write error' (i.e. some problem writing to the media), it wouldn't have said it.

 

If Nero works, try setting ImgBurn to use the 'Incremental' write type instead of SAO/DAO.

 

When drives are having problems burning that can sometimes get around it.

Share this post


Link to post
Share on other sites

Replace your drive it's cheaper than replacing failing media.

 

Btw my pioneer 105 is fine in xp sp3 and ImgBurn.

Share this post


Link to post
Share on other sites

No problems here either.

 

 

I 00:20:38 ImgBurn Version 2.4.1.7 Beta started!

I 00:20:38 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3)

I 00:20:38 Total Physical Memory: 1,048,048 KB - Available: 599,280 KB

I 00:20:38 Initialising SPTI...

I 00:20:38 Searching for SCSI / ATAPI devices...

I 00:20:38 Found 1 DVD-ROM and 1 DVD-RW!

I 00:21:28 Operation Started!

I 00:21:28 Building Image Tree...

I 00:21:28 Checking Directory Depth...

I 00:21:28 Calculating Totals...

I 00:21:28 Preparing Image...

I 00:21:28 Checking Path Length...

I 00:21:28 Contents: 9 Files, 2 Folders

I 00:21:28 Size: 4,427,309,056 bytes

I 00:21:28 Sectors: 2,161,772

I 00:21:28 Image Size: 4,427,939,840 bytes

I 00:21:28 Image Sectors: 2,162,080

I 00:21:28 Operation Successfully Completed! - Duration: 00:00:00

I 00:21:35 Operation Started!

I 00:21:35 Building Image Tree...

I 00:21:37 Checking Directory Depth...

I 00:21:37 Calculating Totals...

I 00:21:37 Preparing Image...

I 00:21:38 Checking Path Length...

I 00:21:38 Contents: 9 Files, 2 Folders

I 00:21:38 Size: 4,427,309,056 bytes

I 00:21:38 Sectors: 2,161,772

I 00:21:38 Image Size: 4,427,939,840 bytes

I 00:21:38 Image Sectors: 2,162,080

I 00:21:40 Operation Successfully Completed! - Duration: 00:00:04

I 00:21:40 Operation Started!

I 00:21:40 Source File: -==/\/[bUILD IMAGE]\/\==-

I 00:21:40 Source File Sectors: 2,162,080 (MODE1/2048)

I 00:21:40 Source File Size: 4,427,939,840 bytes

I 00:21:40 Source File Volume Identifier: nerosucksballs

I 00:21:40 Source File Application Identifier: IMGBURN V2.4.2.0 - THE ULTIMATE IMAGE BURNER!

I 00:21:40 Source File Implementation Identifier: ImgBurn

I 00:21:40 Source File File System(s): ISO9660, UDF (1.02)

I 00:21:40 Destination Device: [1:1:0] PIONEER DVD-RW DVR-105 1.33 (F:) (ATA)

I 00:21:40 Destination Media Type: DVD-R (Disc ID: MCC 02RG20) (Speeds: 1x, 2x, 4x)

I 00:21:40 Destination Media Sectors: 2,297,888

I 00:21:40 Write Mode: DVD

I 00:21:40 Write Type: DAO

I 00:21:40 Write Speed: MAX

I 00:21:40 Link Size: Auto

I 00:21:40 Test Mode: No

I 00:21:40 OPC: Yes

I 00:21:40 BURN-Proof: Enabled

I 00:22:03 Filling Buffer... (20 MB)

I 00:22:04 Writing LeadIn...

I 00:22:25 Writing Session 1 of 1... (1 Track, LBA: 0 - 2162079)

I 00:22:25 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 2162079)

I 00:35:20 Synchronising Cache...

I 00:35:57 Image MD5: 71ed330234dfc153334c2377361d7263

I 00:35:57 Operation Successfully Completed! - Duration: 00:14:17

I 00:35:57 Average Write Rate: 5,586 KB/s (4.0x) - Maximum Write Rate: 5,767 KB/s (4.2x)

I 00:35:57 Cycling Tray before Verify...

I 00:36:25 Device Ready!

I 00:36:26 Operation Started!

I 00:36:26 Source Device: [1:1:0] PIONEER DVD-RW DVR-105 1.33 (F:) (ATA)

I 00:36:26 Source Media Type: DVD-R (Book Type: DVD-R) (Disc ID: MCC 02RG20) (Speeds: 1x, 2x, 4x)

I 00:36:26 Image File: -==/\/[bUILD IMAGE]\/\==-

I 00:36:26 Image File Sectors: 2,162,080 (MODE1/2048)

I 00:36:26 Image File Size: 4,427,939,840 bytes

I 00:36:26 Image File Volume Identifier: nerosucksballs

I 00:36:26 Image File Application Identifier: IMGBURN V2.4.2.0 - THE ULTIMATE IMAGE BURNER!

I 00:36:26 Image File Implementation Identifier: ImgBurn

I 00:36:26 Image File File System(s): ISO9660, UDF (1.02)

I 00:36:26 Read Speed (Data/Audio): MAX / MAX

I 00:36:26 Verifying Session 1 of 1... (1 Track, LBA: 0 - 2162079)

I 00:36:26 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 2162079)

I 00:48:43 Device MD5: 71ed330234dfc153334c2377361d7263

I 00:48:43 Image MD5: 71ed330234dfc153334c2377361d7263

I 00:48:46 Operation Successfully Completed! - Duration: 00:12:16

I 00:48:46 Average Verify Rate: 5,875 KB/s (4.2x) - Maximum Verify Rate: 8,454 KB/s (6.1x)

Share this post


Link to post
Share on other sites

I uninstalled SP3 and I have no problems with imgburn. Installed SP3 and the problems happen again.

Share this post


Link to post
Share on other sites

If 10/10 work on SP2 and 10/10 fail on SP3 then it would appear your ide/atapi driver is messed up.

 

ImgBurn follows the MMC specs which are nothing to do with drivers, the OS or anything else.

 

It should burn equally well under any operating system that you can get it running under.

 

Personally I'd try the drive with some 8x Taiyo Yuden TYG02 discs and if it's still failing then I'd throw it in the bin. The 105 pretty much belongs in a museum now.

Share this post


Link to post
Share on other sites
If 10/10 work on SP2 and 10/10 fail on SP3 then it would appear your ide/atapi driver is messed up.
Using a Pioneer DVR-106D I can confirm the same problem. Using "Incremental burn" fixed it for CDs and DVDs. Thanks for that!

BTW, this is my "work PC," so I don't get to choose the hardware. At home, I use nothing slower than 16X DVD burners.

Share this post


Link to post
Share on other sites
Sign in to follow this  

×

Important Information

By using this site, you agree to our Terms of Use.