Burning failed after about 32%

[Foodman]

Hello, i was trying to burn some back-ups of some xbox360 games. I have the *.iso & *.dvd files.

I read a lot of the tutorials on this an other boards, chose 2,4x for write speed (said 2,4x on the dvds).

Set the book mode to DVD+R

Did not need to set layer break because of the *.dvd file...?

 

I selected the "DVD+R DL Media EEPROM!" under "Lite-On", is this a mistake if i dont have a Lite-On dvd burner?

My dvd burner is a HL-DT-ST DVDRW GSA-S10N A100 (so it says in ImgBurn anyways )

My computer is a dell xps m1330 and is supposed to have a Dual Layer burner

The DVDs are: "Imation - Double Layer, DVD+R DL, 240 min | 8,5 GB | 2.4x", The shop did not have verbatim but these were supposed to be just as good or better, and at least as expensive as verbatim

 

After 32% of burning, i got and error message.

 

I hope someone have suggestions to the problem, and what i probably did wrong, before i start wasting more 7$ blanks

 

Log transcript:

 

I 14:30:54 ImgBurn Version 2.4.1.0 started!

I 14:30:54 Microsoft Windows Vista Home Premium Edition (6.0, Build 6000)

I 14:30:54 Total Physical Memory: 2.094.516 KB - Available: 1.049.836 KB

I 14:30:56 Initialising SPTI...

I 14:30:56 Searching for SCSI / ATAPI devices...

I 14:30:56 Found 1 DVD-ROM and 1 DVD

[LIGHTNING UK!]

Your drive is an LG one, not LiteOn. ImgBurn handles the booktype stuff automatically so you don't need to worry about it.

 

There's an updated bios here for that drive:

 

http://support.euro.dell.com/support/downl...p;fileid=224422

 

You already know the rest. Ditch the Riteks and buy Verbatim 2.4x DVD+R DL (MIS - Made in Singapore).

 

If you can't find them in a store, buy online.

 

I very much doubt you'd even end up paying $2 per disc, let alone $7!

[log01]

Verbatim 2.4x DVD+R DL (MKM 001) is the best DL that's the fact, i usually buy 50 at once, for reserve