Jump to content

Burning dvd-r doesnt work


mbiesheuvel

Recommended Posts

Hello all,

 

First i want to say Imgburn is the best thing i have ever used. But now i have a problem... It's not only with Imgburn but with ALL burning programs (Nero, Alcohol etc).

 

I have Windows Vista Ultimate 32 bit. And 2 Asus DRW-2014L1T (Firmware 1.02) drives. I just bought them and tested them with XP. All worked. Now I installed Vista and i have a problem with burning DVD-R media. I use Verbatim media. Burning DVD+R works fine but when I burn DVD-R I get the next error at 97%:

 

; //****************************************\\

; ImgBurn Version 2.4.2.0 - Log

; zondag, 12 oktober 2008, 13:49:50

; \\****************************************//

;

;

I 13:02:52 ImgBurn Version 2.4.2.0 started!

I 13:02:52 Microsoft Windows Vista Ultimate Edition (6.0, Build 6001 : Service Pack 1)

I 13:02:52 Total Physical Memory: 3.143.428 KB - Available: 2.066.524 KB

I 13:02:52 Initialising SPTI...

I 13:02:52 Searching for SCSI / ATAPI devices...

I 13:02:52 Found 1 DVD-ROM, 2 DVD

Edited by mbiesheuvel
Link to comment
Share on other sites

13:03:28 DeviceIoControl(FSCTL_LOCK_VOLUME) Failed! - Reason: Toegang geweigerd

 

what is the reason in english?

check your filter drivers, tools-> filter driver load order

 

13:03:28 DeviceIoControl(FSCTL_LOCK_VOLUME) Failed! - Reason: Access Denied

 

But thats not the problem. Cause also when that error wasnt there it went failed

 

Check the attachment for it.

 

Speed the burn up a bit.

 

You might find your drive is better geared towards burning that media at higher speeds than lower ones.

 

I already did that too... Didn't help :(.

post-14631-1223961326_thumb.jpg

Edited by mbiesheuvel
Link to comment
Share on other sites

Where are your Verbatim blanks made? Singapore? India? Elsewhere? Anyway, if the drive can't burn them at 8x or 12x I'd make a high tech "optical paperweight" (doorstop is another option) with it ;)

Link to comment
Share on other sites

Destination Device: [3:0:0] ASUS DRW-2014L1T 1.02 (I:) (Fibre)

 

fibre??

what is it set up as in bios?

 

What does fibre mean?? I just reinstalled my pc with xp and guess what... It wont burn in there either now :s. I am totaly confused about it... Mbe those verbatims are not so good as I thought.. Or I just have bought the most crappiest dvd burners there are....

 

How can I see where those verbatims are made then?

Link to comment
Share on other sites

Fibre is just another form of drive connectivity.

 

It's used by enterprise hard disks and certainly not something an optical drive should be reporting is in use.... and that's down to your drivers.

 

Unless you have an Intel chipset motherboard, don't install any board/controller drivers from the manufacturer.

 

A basic install of XP SP3 should work just fine.

Link to comment
Share on other sites

Fibre is just another form of drive connectivity.

 

It's used by enterprise hard disks and certainly not something an optical drive should be reporting is in use.... and that's down to your drivers.

 

Unless you have an Intel chipset motherboard, don't install any board/controller drivers from the manufacturer.

 

A basic install of XP SP3 should work just fine.

 

Well I didnt install anything. I just use Vista Ultimate SP1 and put those drives in. Used the default drivers that came with Vista too... So what did I do wrong??? And how can I change it back to the good thing?

Link to comment
Share on other sites

New log and error....

 

I 21:49:37 ImgBurn Version 2.4.2.0 started!

I 21:49:37 Microsoft Windows Vista Ultimate Edition (6.0, Build 6001 : Service Pack 1)

I 21:49:37 Total Physical Memory: 3.143.428 KB - Available: 1.814.716 KB

I 21:49:37 Initialising SPTI...

I 21:49:37 Searching for SCSI / ATAPI devices...

I 21:49:37 Found 2 DVD

post-14631-1224189400_thumb.jpg

Link to comment
Share on other sites

And this is when I burn a Maxell DVD+R with the same DVD-Burner...

 

I 22:35:22 ImgBurn Version 2.4.2.0 started!

I 22:35:22 Microsoft Windows Vista Ultimate Edition (6.0, Build 6001 : Service Pack 1)

I 22:35:22 Total Physical Memory: 3.143.428 KB - Available: 1.815.872 KB

I 22:35:22 Initialising SPTI...

I 22:35:22 Searching for SCSI / ATAPI devices...

I 22:35:22 Found 2 DVD

Link to comment
Share on other sites

I 23:14:02 ImgBurn Version 2.4.2.0 started!

I 23:14:02 Microsoft Windows Vista Ultimate Edition (6.0, Build 6001 : Service Pack 1)

I 23:14:02 Total Physical Memory: 3.143.428 KB - Available: 1.792.200 KB

I 23:14:02 Initialising SPTI...

I 23:14:02 Searching for SCSI / ATAPI devices...

I 23:14:22 Found 2 DVD

Link to comment
Share on other sites

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.