jkilbrid Posted October 21, 2008 Share Posted October 21, 2008 I am having a strange problem with img burn. Firstly, Imgburn simiply WILL not burn at the speed I specify. No matter what speed I select, IMGburn will always burn at maximum rate (4.0x for DLs), which brings me to my second problem. IMGburn worked perfectly for me for a very long time, then all of the sudden (right when Gears 2 came out) no matter what image I try to burn (I have stuck to testing until I can get it working again, I don't want to lose anymore DVDs) IMGburn works AOK up until 54% (tried on 2 seperate isos downloaded from 2 different sources) and then the buffer goes to 0 and it stops. Here is my log. I 15:34:33 Operation Started! I 15:34:33 Source File: C:\Documents and Settings\HP_Administrator\My Documents\Downloads\alt.binaries.games.xbox360\unl-biag\unl-biag\unl-biag.dvd I 15:34:33 Source File Sectors: 3,825,924 (MODE1/2048) I 15:34:33 Source File Size: 7,835,492,352 bytes I 15:34:33 Source File Volume Identifier: XGD2DVD_NTSC I 15:34:33 Source File Volume Set Identifier: 34672923 I 15:34:33 Source File Implementation Identifier: Sonic Scenarist 3.1 I 15:34:33 Source File File System(s): ISO9660, UDF (1.02) I 15:34:33 Destination Device: [1:0:0] HP DVD Writer 840b ED56 (E:) (ATA) I 15:34:33 Destination Media Type: DVD-R DL (Disc ID: MKM 01RD30) (Speeds: 4x) I 15:34:33 Destination Media Sectors: 4,171,712 I 15:34:33 Write Mode: DVD I 15:34:33 Write Type: DAO I 15:34:33 Write Speed: 2.4x I 15:34:33 Link Size: Auto I 15:34:33 Test Mode: Yes I 15:34:33 OPC: No I 15:34:33 BURN-Proof: Enabled I 15:34:34 Optimal L0 Data Zone Capacity: 1,913,760 I 15:34:34 Optimal L0 Data Zone Method: Copied From Original Disc W 15:34:35 Cannot set the layer break position when burning DVD-R DL media. I 15:34:35 Filling Buffer... (40 MB) I 15:34:36 Writing LeadIn... I 15:34:41 Writing Session 1 of 1... (1 Track, LBA: 0 - 3825923) I 15:34:41 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3825923) I 15:34:41 Writing Layer 0... (LBA: 0 - 2092895) W 15:38:06 Waiting for buffers to recover... (LBA: 545440) W 15:38:14 Waiting for hard disk activity to reach threshold level... I 15:38:14 Writing Sectors... W 15:42:25 Waiting for buffers to recover... (LBA: 1207744) W 15:42:40 Waiting for hard disk activity to reach threshold level... I 15:42:41 Writing Sectors... W 15:43:14 Waiting for buffers to recover... (LBA: 1283872) W 15:43:28 Waiting for hard disk activity to reach threshold level... I 15:43:34 Writing Sectors... I 15:48:36 Writing Layer 1... (LBA: 2092896 - 3825923) At this point it locks up and I have to ctrl alt del and reset my computer before my burner will even function again. it occurs at 54% every time in all images. I have reinstalled my drivers (twice) and uninstalled/reinstalled imageburn, all to no avail. Thank you in advance for any help you can offer Link to comment Share on other sites More sharing options...
dontasciime Posted October 21, 2008 Share Posted October 21, 2008 your using the wrong discs you need dual layer + not minus Link to comment Share on other sites More sharing options...
jkilbrid Posted October 21, 2008 Author Share Posted October 21, 2008 (edited) Holy crap you're right. I can't believe I was that dumb and didn't notice the fact that I'm writing on to DVD-DL. Would that really result in the problems I'm getting? Edited October 21, 2008 by jkilbrid Link to comment Share on other sites More sharing options...
dontasciime Posted October 21, 2008 Share Posted October 21, 2008 EVEN if they burnt they would not work on ya 360 as layerbreak would be in wrong place look at log it warned you about layerbreak. You need Verbatim MKM-001-00 blanks Waiting for hard disk activity to reach threshold level... this is not a very good sign either do not use the computer or download anything or scan for viruses etc whilst burning. defrag your hard drives and then scan you hard drives for errors as well, ticking top box automatically fix file system errors , not the scan for bad sectors, not unless you have lots of time or know fine well the hd is on its way out. Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted October 21, 2008 Share Posted October 21, 2008 and for the speed thing, just look at the speeds your drive says it supports on that media... I 15:34:33 Destination Media Type: DVD-R DL (Disc ID: MKM 01RD30) (Speeds: 4x) It's also shown in the disc info panel on the right as 'Supported Write Speeds'. Link to comment Share on other sites More sharing options...
lfcrule1972 Posted October 22, 2008 Share Posted October 22, 2008 Has anyone ever found a use for those DVD-R DL's ??? Link to comment Share on other sites More sharing options...
cornholio7 Posted October 22, 2008 Share Posted October 22, 2008 discovery tests Link to comment Share on other sites More sharing options...
LOCOENG Posted October 23, 2008 Share Posted October 23, 2008 Has anyone ever found a use for those DVD-R DL's ??? I like to hang them from my rear view mirror. Link to comment Share on other sites More sharing options...
Recommended Posts