Jump to content

Help With Setting up the burn


snoop3847

Recommended Posts

This is my 1st time trying to write a game to the disk. I've used the Build Facility and got a .dvd, .mds and also an ISO file with no extention details.

 

I've added the .mds & .dvd files to the write queue but it wont allow me add the iso file. i've tried adding .iso after the name but still nothing it just keeps saying you should have selrected the mds file and not this one.

 

Any tips on were im going wrong as im not very good at finding solutions to these problems and its driving me mental

Link to comment
Share on other sites

Hi Thanks i've read some of the guides and ive followed the steps in how to use the queue but it still didnt help.

 

I just dont get what im doing wrong and why it just wont add the iso file to the queue

Edited by snoop3847
Link to comment
Share on other sites

Yea i choose that first.

 

But then i made a copy of the ISO file and renamed it with .iso at the end and then it let me add it to the queue, so its burning the disc now just dont know what i did different from before.

 

thanks anyway

Link to comment
Share on other sites

Also I've Been reading the various post about burning and seen some people mention the break layer. I dont think i have one of these.

 

What exactuly is it because i wasnt asked if i wanted to make one when i made the DVD

Edited by snoop3847
Link to comment
Share on other sites

I 18:04:36 Operation Started!

I 18:04:36 Source File: I:\Downloads\Xbox 360\Race Pro1\Race Pro [MULTI5][XBOX360][PAL][WwW.GamesTorrents.CoM]\Race Pro\sw-racepro.iso.iso

I 18:04:36 Source File Sectors: 3,825,924 (MODE1/2048)

I 18:04:36 Source File Size: 7,835,492,352 bytes

I 18:04:36 Source File Volume Identifier: XGD2DVD_NTSC

I 18:04:36 Source File Volume Set Identifier: 34672923

I 18:04:36 Source File Implementation Identifier: Sonic Scenarist 3.1

I 18:04:37 Source File File System(s): ISO9660, UDF (1.02)

I 18:04:37 Destination Device: [3:0:0] PIONEER DVD-RW DVR-116D 1.09 (D:) (ATA)

I 18:04:37 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 2.4x, 4x, 6x, 8x, 10x)

I 18:04:37 Destination Media Sectors: 4,173,824

I 18:04:37 Write Mode: DVD

I 18:04:37 Write Type: DAO

I 18:04:37 Write Speed: 8x

I 18:04:37 Link Size: Auto

I 18:04:37 Test Mode: No

I 18:04:37 OPC: No

I 18:04:37 BURN-Proof: Enabled

I 18:04:37 Optimal L0 Data Zone Capacity: 1,912,976

I 18:04:37 Optimal L0 Data Zone Method: ECC Block Boundary

I 18:04:55 Filling Buffer... (40 MB)

I 18:04:55 Writing LeadIn...

I 18:04:58 Writing Session 1 of 1... (1 Track, LBA: 0 - 3825923)

I 18:04:58 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3825923)

I 18:04:58 Writing Layer 0... (LBA: 0 - 1912975)

I 18:11:41 Writing Layer 1... (LBA: 1912976 - 3825923)

I 18:18:55 Synchronising Cache...

I 18:18:56 Closing Track...

I 18:18:57 Finalising Disc...

I 18:19:31 Exporting Graph Data...

I 18:19:31 Graph Data File: C:\Users\Chris\AppData\Roaming\ImgBurn\Graph Data Files\PIONEER_DVD-RW_DVR-116D_1.09_02-MARCH-2009_18-04_MKM-003-00_8x.ibg

I 18:19:31 Export Successfully Completed!

I 18:19:31 Operation Successfully Completed! - Duration: 00:14:54

I 18:19:31 Average Write Rate: 9,152 KB/s (6.6x) - Maximum Write Rate: 11,237 KB/s (8.1x)

I 18:19:31 Cycling Tray before Verify...

I 18:19:57 Device Ready!

I 18:19:57 Operation Started!

I 18:19:57 Source Device: [3:0:0] PIONEER DVD-RW DVR-116D 1.09 (D:) (ATA)

I 18:19:57 Source Media Type: DVD+R DL (Book Type: DVD-ROM) (Disc ID: MKM-003-00) (Speeds: 2.4x, 4x, 6x, 8x, 10x)

I 18:19:57 Image File: I:\Downloads\Xbox 360\Race Pro1\Race Pro [MULTI5][XBOX360][PAL][WwW.GamesTorrents.CoM]\Race Pro\sw-racepro.iso.iso

I 18:19:57 Image File Sectors: 3,825,924 (MODE1/2048)

I 18:19:57 Image File Size: 7,835,492,352 bytes

I 18:19:57 Image File Volume Identifier: XGD2DVD_NTSC

I 18:19:57 Image File Volume Set Identifier: 34672923

I 18:19:57 Image File Implementation Identifier: Sonic Scenarist 3.1

I 18:19:57 Image File File System(s): ISO9660, UDF (1.02)

I 18:19:57 Read Speed (Data/Audio): MAX / MAX

I 18:19:57 Verifying Session 1 of 1... (1 Track, LBA: 0 - 3825923)

I 18:19:57 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 3825923)

I 18:19:57 Verifying Layer 0... (LBA: 0 - 1912975)

I 18:25:35 Verifying Layer 1... (LBA: 1912976 - 3825923)

I 18:31:14 Exporting Graph Data...

I 18:31:14 Graph Data File: C:\Users\Chris\AppData\Roaming\ImgBurn\Graph Data Files\PIONEER_DVD-RW_DVR-116D_1.09_02-MARCH-2009_18-04_MKM-003-00_8x.ibg

I 18:31:14 Export Successfully Completed!

I 18:31:14 Operation Successfully Completed! - Duration: 00:11:11

I 18:31:14 Average Verify Rate: 11,403 KB/s (8.2x) - Maximum Verify Rate: 19,036 KB/s (13.7x)

 

 

 

Just put this Disc in my Xbox and it still says its an unreadable disc!

Edited by snoop3847
Link to comment
Share on other sites

You've messed things up by renaming the file.

 

sw-racepro.iso.iso

 

should be:

 

sw-racepro.iso

 

Then when you load the iso it will tell you off and load the dvd file instead - which is what you should be doing in the first place (i.e. ignore the iso).

 

The layer break info is in the dvd file and it instructs ImgBurn on how to burn the double layer iso image.

Link to comment
Share on other sites

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.