KingNero Posted March 18, 2009 Share Posted March 18, 2009 (edited) Upon attempting to change the booktype for DVD+R, so I can burn in DVD-R I receive an invalid command operation code error. I've browed around a bit and could not find a solution, I'm also new at this, so please bear with me. HL-DT-ST DVDRAM GSA-T50F TT03 (ATAPI) Current Profile: DVD+R Disc Information: Status: Empty Erasable: No Free Sectors: 2,295,104 Free Space: 4,700,372,992 bytes Free Time: 510:03:29 (MM:SS:FF) Supported Write Speeds: 4x, 8x Disc Control Blocks Information: HL-DT-ST GSA-T50F Physical Format Information (Last Recorded): Disc ID: RITEK-R05-01 Book Type: DVD+R Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 1 Track Path: Parallel Track Path (PTP) Linear Density: 0.267 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 2,491,711 Last Physical Sector in Layer 0: 0 Edited March 18, 2009 by KingNero Link to comment Share on other sites More sharing options...
LOCOENG Posted March 18, 2009 Share Posted March 18, 2009 Disc Information:Status: Empty You have to burn something to the disc before you can booktype it and the result will be DVD-ROM not DVD-R. Have you changed the booktype in the settings for your drive? Link to comment Share on other sites More sharing options...
KingNero Posted March 18, 2009 Author Share Posted March 18, 2009 I've only attempted to change settings through IMGburn. I'll burn something and report my findings. Link to comment Share on other sites More sharing options...
LOCOENG Posted March 18, 2009 Share Posted March 18, 2009 You have to have a disc in the drive when you change the settings from 'DVD+R' to 'DVD-ROM', then if the change went through you should have a popup saying "success!" Link to comment Share on other sites More sharing options...
KingNero Posted March 18, 2009 Author Share Posted March 18, 2009 I'm sorry, but is that before I begin to Burn my Disk or after? If it's before, I still get the error while trying to change Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted March 18, 2009 Share Posted March 18, 2009 It should all be automatic so if it's not working, either your drive doesn't support the booktype command or your drivers are blocking it. Link to comment Share on other sites More sharing options...
KingNero Posted March 18, 2009 Author Share Posted March 18, 2009 (edited) Where would I look to see if It's supported? Edit: Nevermind, problem solved, I can Change it now. Edited March 18, 2009 by KingNero Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted March 18, 2009 Share Posted March 18, 2009 Care to tell us what you did? Link to comment Share on other sites More sharing options...
scotty_buttons Posted March 20, 2009 Share Posted March 20, 2009 yes plz tell us cuz im having the same problem Link to comment Share on other sites More sharing options...
Recommended Posts