Welly

As it happens i was doing some googling last night and decided to remove the Nvida PCI drivers and seems to have done the trick. *Edit* no it hasnt

I do it's a GA-M68SM-S2 This one Running a AMD dual core With 4 gig of ram. I have only just plugged in the stick strip and tried with different variations of single strip, two sticks and swapped locations etc. This is the thing that bugging me, it always worked fine then one day it just went tits up.

Firmware now upgraded. I do have another burner that is already up on SB02 with the same problem Both connected to the MB directly using normal cables. (MB is a GB S series if thats any help) RAM checks fine with WMD (Windows Mem Diag)

I 00:54:25 ImgBurn Version 2.4.2.0 started! I 00:54:25 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 3) I 00:54:25 Total Physical Memory: 3,602,860 KB - Available: 3,068,268 KB I 00:54:25 Initialising SPTI... I 00:54:25 Searching for SCSI / ATAPI devices... I 00:54:25 Found 2 DVD

Really starting to annoy me now. Have brought a new burner. Reformatted my system Changed media to Verbatim Still won't verify. Any help?

Guess the clue is in the name really. How stupid do i feel

I may be going mad and not looking hard enough but can IMGBURN do the same as dvd decypter. When you put dvd into the drive it lets you rip to file rather then ISO.?

Just knocked out a clean burn and verify using a maxell at 4x but can't get it to do it again using the same image

Not had a chance to get any othe rmedia bar some Maxell's This is at 4x I 00:10:55 Operation Started! I 00:10:55 Source Device: [1:0:0] TSSTcorp CDDVDW SH-S203D SB01 (E:) (ATA) I 00:10:55 Source Media Type: DVD-R (Book Type: DVD-R) (Disc ID: MBI 01RG40) (Speeds: 4x, 6x, 8x, 12x, 16x) I 00:10:55 Image File: D:***** I 00:10:55 Image File Sectors: 2,165,536 (MODE1/2048) I 00:10:55 Image File Size: 4,435,017,728 bytes I 00:10:55 Image File Volume Identifier: ****** I 00:10:55 Image File Volume Set Identifier: 3969BCF3C696430C I 00:10:55 Image File Application Identifier: NERO BURNING ROM I 00:10:55 Image File Implementation Identifier: Nero I 00:10:55 Image File File System(s): ISO9660, UDF (1.02) I 00:10:55 Read Speed (Data/Audio): 8x / 8x I 00:10:55 Verifying Session 1 of 1... (1 Track, LBA: 0 - 2165535) I 00:10:55 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 2165535) W 00:16:33 Miscompare at LBA: 904066, Offset: 7, File: \VIDEO_TS\VTS_01_2.VOB W 00:16:33 Device: 0xB7 W 00:16:33 Image File: 0xC0 W 00:16:33 Total Errors in Sector: 2,019 I 00:16:33 Verifying Sectors... W 00:16:34 Miscompare at LBA: 904067, Offset: 7, File: \VIDEO_TS\VTS_01_2.VOB W 00:16:34 Device: 0xBC W 00:16:34 Image File: 0xC5 W 00:16:34 Total Errors in Sector: 2,022 I 00:16:34 Verifying Sectors... W 00:16:55 Miscompare at LBA: 920578, Offset: 7, File: \VIDEO_TS\VTS_01_2.VOB W 00:16:55 Device: 0xCB W 00:16:55 Image File: 0xD4 W 00:16:55 Total Errors in Sector: 2,015 I 00:16:55 Verifying Sectors... W 00:16:57 Miscompare at LBA: 920579, Offset: 7, File: \VIDEO_TS\VTS_01_2.VOB W 00:16:57 Device: 0xD0 W 00:16:57 Image File: 0xD9 W 00:16:57 Total Errors in Sector: 2,017 I 00:16:57 Verifying Sectors... W 00:17:08 Miscompare at LBA: 938018, Offset: 7, File: \VIDEO_TS\VTS_01_2.VOB W 00:17:08 Device: 0xD1 W 00:17:08 Image File: 0xDA W 00:17:08 Total Errors in Sector: 2,016 I 00:17:08 Verifying Sectors... W 00:17:09 Miscompare at LBA: 938019, Offset: 7, File: \VIDEO_TS\VTS_01_2.VOB W 00:17:09 Device: 0xD6 W 00:17:09 Image File: 0xDF W 00:17:09 Total Errors in Sector: 2,018 I 00:17:09 Verifying Sectors... W 00:17:22 Miscompare at LBA: 977250, Offset: 7, File: \VIDEO_TS\VTS_01_2.VOB W 00:17:22 Device: 0x92 W 00:17:22 Image File: 0x9C W 00:17:22 Total Errors in Sector: 2,018 I 00:17:22 Verifying Sectors...

Typically burn at 8x. 12x fails within a few minutes. Must have burnt 100+ dvds without fail without changing any settings so on that basis do you reckon it could be the burner itself? Its not that old

Having burnt a number of discs with Dvd Decyprtor i started to get a verifying problem. I upgraded to IMGburn and still have the same problem. i'm using Phillips DVD-R and never had a problem till half way throuogh a 100 stack and it consistantly throws up the errors. I have upgrade firmware on the writer and i'm still none the wiser. Can any one help Disc burns fine, just won't verify I 11:18:41 Device Ready! I 11:18:42 Operation Started! I 11:18:42 Source Device: [1:0:0] TSSTcorp CDDVDW SH-S203D SB01 (E:) (ATA) I 11:18:42 Source Media Type: DVD-R (Book Type: DVD-R) (Disc ID: MBI 01RG40) (Speeds: 4x, 6x, 8x, 12x, 16x) I 11:18:42 Image File: D:\Videos\Films\gts.nrg I 11:18:42 Image File Sectors: 2,280,304 (MODE1/2048) I 11:18:42 Image File Size: 4,670,062,592 bytes I 11:18:42 Image File Volume Identifier: ***** I 11:18:42 Image File Volume Set Identifier: 396910EAC696EF15 I 11:18:42 Image File Application Identifier: NERO BURNING ROM I 11:18:42 Image File Implementation Identifier: Nero I 11:18:42 Image File File System(s): ISO9660, UDF (1.02) I 11:18:42 Read Speed (Data/Audio): 8x / 8x I 11:18:42 Verifying Session 1 of 1... (1 Track, LBA: 0 - 2280303) I 11:18:42 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 2280303) W 11:20:24 Failed to Read Sector 69672 - Reason: Timeout on Logical Unit W 11:20:24 Sector 69672 maps to File: \VIDEO_TS\VTS_01_1.VOB W 11:20:41 Failed to Read Sector 69674 - Reason: Timeout on Logical Unit W 11:20:41 Sector 69674 maps to File: \VIDEO_TS\VTS_01_1.VOB W 11:20:52 Failed to Read Sector 69675 - Reason: Timeout on Logical Unit W 11:20:52 Sector 69675 maps to File: \VIDEO_TS\VTS_01_1.VOB W 11:21:02 Failed to Read Sector 69676 - Reason: Timeout on Logical Unit W 11:21:02 Sector 69676 maps to File: \VIDEO_TS\VTS_01_1.VOB W 11:21:16 Failed to Read Sector 69677 - Reason: Timeout on Logical Unit W 11:21:16 Sector 69677 maps to File: \VIDEO_TS\VTS_01_1.VOB W 11:21:26 Failed to Read Sector 69678 - Reason: Timeout on Logical Unit W 11:21:26 Sector 69678 maps to File: \VIDEO_TS\VTS_01_1.VOB W 11:22:10 Failed to Read Sector 69705 - Reason: Timeout on Logical Unit W 11:22:10 Sector 69705 maps to File: \VIDEO_TS\VTS_01_1.VOB The pop up error i recieve is: Scsi Status:0x02 Interpretation: Check condition CDB: 28 00 00 01 10 4B 00 00 01 00 Interpretation: Read (10) - sector: 69707 Sense Area: 70 00 04 00 00 00 00 0A 00 00 00 00 3E 02 00 00 00 00 Interpretation: Timeout on Logical Unit