Jump to content

DjKilla

Members
  • Posts

    27
  • Joined

  • Last visited

Everything posted by DjKilla

  1. I have the latest firmware and use genuine Taiyo Yuden 16x media from rima.com. I never had an issue until I received my latest batch of Taiyo Yuden 16x DVD-R media from rima. I'm not sure if it's the media or the drive. I've been ordering for years from rima but never had an issue. As for OPC, I see a box that says 'Perform OPC Before Write' under the *write* tab in settings. Is this the box I need to check? I've always used the latest version of ImgBurn without any problems. Is this because OPC was always on/checked in previous versions of ImgBurn and the current version has it off/unchecked which could be causing the problems I'm having?
  2. Recently I started getting the following message. Is this a hardware or ImgBurn problem/issue? I 11:54:38 ImgBurn Version 2.4.1.0 started! I 11:54:38 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2) I 11:54:38 Total Physical Memory: 523,568 KB - Available: 328,536 KB I 11:54:38 Initialising SPTI... I 11:54:38 Searching for SCSI / ATAPI devices... I 11:54:38 Found 1 DVD-ROM and 1 DVD
  3. Is there a program that will read/show the DVD volume identifiers AFTER I've burned the info on the DVD?
  4. LIGHTNING UK! - Now everything makes sense to me. Thanks for taking the time to explain everything to me. That's the info I was looking for to help me make the right choice. -D j K i l l a-
  5. What exactly makes the third one the best? What should I look for using the pic as an example? -D j K i l l a-
  6. I just want to be sure I chose the correct layer break. The one that's high-lighted/greyed is the one I picked.
  7. (Version 2.3.2.0) I did two more burns again and here's the results. The first burn was 12X again using Taiyo Yuden 16X DVD-R media in Build mode and as usual the Device Buffer went crazy, bouncing everywhere. I never got the burn time I should have. The second burn I did was at 8X using the same media in Build mode and for this first time, the Device Buffer was normal and didn't bounce everywhere. I did notice that Imgburn still continues to use a large amount of CPU time even while burning at 8X. Here's the pic of the Task Manager while burning at 8X:
  8. (Version 2.3.2.0) Just burned another IMG file in Write mode on Taiyo Yuden 16x DVD-R media at 12X. Excellent results! Looks like the second graph in my last post. Imgburn is still using a lot of CPU time. Here's the pic of the Task Manager:
  9. (Version 2.3.2.0) I switched to DVD-R and made the following burns with better results. I'm beginning to think it's more of a media problem and possably firmware. Burned using Build mode at 12x: Burned IMG using Write mode at 12x: **I'm going to burn a couple more IMG files and post Task Manager pics to see how much CPU time Imgburn is taking.
  10. Imgburn 2.3.1.0 wasn't giving me any problems but on this last install, I was getting the same problems. In a few hours I'll be burning some ISO files and using Taiyo Yuden 16x DVD-R media. I'll also burn at 8X and 12X to see if there's a difference.
  11. I haven't burned an ISO/IMG file for a while. Basicly I extract the ISO/IMG file to a VIDEO_TS folder then run FixVTS to make sure the file structure is accurate. I then start Imgburn and in Build mode I select the VIDEO_TS folder with the movie files and burn it. I just installed version 2.3.1.0 again and I'm getting the same results, Buffer at 100% and Device Buffer bouncing around. I also checked the Processes tab in Task Manager and Imgburn was still taking a lot of CPU time. Nothing else was taking any CPU time. Here's the latest burn using version 2.3.1.0. I 00:21:07 ImgBurn Version 2.3.1.0 started! I 00:21:07 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2) I 00:21:07 Total Physical Memory: 523,568 KB - Available: 307,036 KB I 00:21:07 Initialising SPTI... I 00:21:07 Searching for SCSI / ATAPI devices... I 00:21:08 Found 1 DVD-ROM and 1 DVD?RW! I 00:22:43 Operation Started! I 00:22:43 Building Image Tree... I 00:22:43 Checking Directory Depth... I 00:22:43 Calculating Totals... I 00:22:43 Preparing Image... I 00:22:43 Checking Path Length... I 00:22:44 Image Size: 4,626,579,456 bytes I 00:22:44 Image Sectors: 2,259,072 I 00:22:46 Operation Successfully Completed! - Duration: 00:00:02 I 00:22:46 Operation Started! I 00:22:46 Source File: -==/\/[bUILD IMAGE]\/\==- I 00:22:46 Source File Sectors: 2,259,072 (MODE1/2048) I 00:22:46 Source File Size: 4,626,579,456 bytes I 00:22:46 Source File Volume Identifier: Making The Band I 00:22:46 Source File Application Identifier: IMGBURN V2.3.1.0 - THE ULTIMATE IMAGE BURNER! I 00:22:46 Source File Implementation Identifier: ImgBurn I 00:22:46 Source File File System(s): ISO9660, UDF (1.02) I 00:22:46 Destination Device: [1:0:0] PIONEER DVD-RW DVR-112D 1.15 (F:) (ATAPI) I 00:22:46 Destination Media Type: DVD+R (Disc ID: YUDEN000-T03-00) (Speeds: 4x, 6x, 8x, 12x, 16x, 18x) I 00:22:46 Destination Media Sectors: 2,295,104 I 00:22:46 Write Mode: DVD I 00:22:46 Write Type: DAO I 00:22:46 Write Speed: 12x I 00:22:46 Link Size: Auto I 00:22:46 Test Mode: No I 00:22:46 BURN-Proof: Enabled I 00:22:49 Filling Buffer... (20 MB) I 00:22:50 Writing LeadIn... I 00:23:15 Writing Image... (LBA: 0 - 2259071) I 00:29:45 Synchronising Cache... I 00:29:46 Closing Track... I 00:29:48 Finalising Disc... I 00:30:07 Image MD5: 1a77cce4363076a13b6ffefcf3f2b920 I 00:30:07 Operation Successfully Completed! - Duration: 00:07:21 I 00:30:07 Average Write Rate: 11,584 KB/s (8.4x) - Maximum Write Rate: 16,220 KB/s (11.7x)
  12. I uninstalled the IDE controller according to the FAQ, re-loaded the latest drivers for the chipset and burned another DVD+R. By the way, I do have a 1Ghz processor but I'm well within the requirements for the Pioneer 112D and I'm able to burn successfully with Nero and Imgburn 2.3.1.0 and receive a time around 6:09. There must be something in the code/programming that's giving me (possably others) performance issues with Imgburn. Also, my Pioneer 112D is capable of burning 18x with the current computer I have according to the requirements. Here's the graph you requested:
  13. Here's the latest info you requested.
  14. Both hard drives are set to Ultra DMA Mode 5. All chipset drivers have already been updated to the latest. The only thing I haven't installed is the following: Performance Software - Intel? Application Accelerator [iAA23_ENU.EXE, IAA23_MULTI.EXE] (1973KB) 2.3 11/13/2002 The Intel? Application Accelerator enables faster delivery of data from the hard drive to the processor and other system level hardware.
  15. Do I need to have Task Manager open when burning? What tab do I need to check and what do I look for?
  16. When I say I get bad burns, I'm refering to the Device Buffer bouncing and the burn times being much to long. Every DVD has completed the burn successfully and has been playable/viewable without problems.
  17. The Pioneer is set to Ultra DMA Mode 4 in Secondary IDE Channel under IDE ATA/ATAPI controllers in Device Manager. Everything in msconfig Startup tab has been unchecked. There is absolutely nothing running except for the services in msconfig Services tab.
  18. Another bad burn with the Device Buffer bouncing around which is causing the DVD burner to not maintain speed selected. Burn times are much to long. With version 2.3.1.0 I was able to complete burns at around 6:00. I 14:55:02 ImgBurn Version 2.3.2.0 started! I 14:55:02 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2) I 14:55:02 Total Physical Memory: 523,568 KB - Available: 313,608 KB I 14:55:02 Initialising SPTI... I 14:55:02 Searching for SCSI / ATAPI devices... I 14:55:02 Found 1 DVD-ROM and 1 DVD?RW! I 14:55:45 Operation Started! I 14:55:45 Building Image Tree... I 14:55:45 Checking Directory Depth... I 14:55:45 Calculating Totals... I 14:55:45 Preparing Image... I 14:55:46 Checking Path Length... I 14:55:46 Image Size: 4,607,508,480 bytes I 14:55:46 Image Sectors: 2,249,760 I 14:55:49 Operation Successfully Completed! - Duration: 00:00:03 I 14:55:49 Operation Started! I 14:55:49 Source File: -==/\/[bUILD IMAGE]\/\==- I 14:55:49 Source File Sectors: 2,249,760 (MODE1/2048) I 14:55:49 Source File Size: 4,607,508,480 bytes I 14:55:49 Source File Volume Identifier: Thr3e I 14:55:49 Source File Application Identifier: IMGBURN V2.3.2.0 - THE ULTIMATE IMAGE BURNER! I 14:55:49 Source File Implementation Identifier: ImgBurn I 14:55:49 Source File File System(s): ISO9660, UDF (1.02) I 14:55:49 Destination Device: [1:0:0] PIONEER DVD-RW DVR-112D 1.15 (F:) (ATA) I 14:55:49 Destination Media Type: DVD+R (Disc ID: YUDEN000-T03-00) (Speeds: 4x, 6x, 8x, 12x, 16x, 18x) I 14:55:49 Destination Media Sectors: 2,295,104 I 14:55:49 Write Mode: DVD I 14:55:49 Write Type: DAO I 14:55:49 Write Speed: 12x I 14:55:49 Link Size: Auto I 14:55:49 Test Mode: No I 14:55:49 BURN-Proof: Enabled I 14:55:52 Filling Buffer... (20 MB) I 14:55:53 Writing LeadIn... I 14:56:18 Writing Image... (LBA: 0 - 2249759) I 15:02:57 Synchronising Cache... I 15:02:58 Closing Track... I 15:03:00 Finalising Disc... I 15:03:20 Image MD5: 05aa26f16aa71e2e9cdff425d5ca7531 I 15:03:20 Operation Successfully Completed! - Duration: 00:07:30 I 15:03:20 Average Write Rate: 11,305 KB/s (8.2x) - Maximum Write Rate: 17,334 KB/s (12.5x)
  19. I only use Tayo Yuden 16x single layer DVD+R media. All the iso images and raw files (ifo, bup, vob) are stored on two drives and three partitions. Each drive and partition has been defragged. The Pioneer is connected on it's own 40 pin 80 wire ide cable. Nothing else is on this cable and the Pioneer is set to master. After installing/uninstalling both versions multiple times and testing. Only version 2.3.1.0 worked great and the latest version 2.3.2.0 had the Device Buffer/speed problems. There has to be something that changed from 2.3.1.0 to the latest version which is causing this. If there is a test/beta version of Imgburn that's available, I could check to see if the Device Problem is fixed or not but I'm DEFINATELY sure it's a program code change or setting in the program that's causing this.
  20. I 11:48:35 ImgBurn Version 2.3.2.0 started! I 11:48:35 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2) I 11:48:35 Total Physical Memory: 523,568 KB - Available: 317,548 KB I 11:48:35 Initialising SPTI... I 11:48:35 Searching for SCSI / ATAPI devices... I 11:48:35 Found 1 DVD-ROM and 1 DVD?RW! I 11:49:21 Operation Started! I 11:49:21 Building Image Tree... I 11:49:22 Checking Directory Depth... I 11:49:22 Calculating Totals... I 11:49:22 Preparing Image... I 11:49:22 Checking Path Length... I 11:49:22 Image Size: 4,699,881,472 bytes I 11:49:22 Image Sectors: 2,294,864 I 11:49:23 Operation Successfully Completed! - Duration: 00:00:01 I 11:49:23 Operation Started! I 11:49:23 Source File: -==/\/[bUILD IMAGE]\/\==- I 11:49:23 Source File Sectors: 2,294,864 (MODE1/2048) I 11:49:23 Source File Size: 4,699,881,472 bytes I 11:49:23 Source File Volume Identifier: Alpha Dog I 11:49:23 Source File Application Identifier: IMGBURN V2.3.2.0 - THE ULTIMATE IMAGE BURNER! I 11:49:23 Source File Implementation Identifier: ImgBurn I 11:49:23 Source File File System(s): ISO9660, UDF (1.02) I 11:49:23 Destination Device: [1:0:0] PIONEER DVD-RW DVR-112D 1.15 (F:) (ATA) I 11:49:23 Destination Media Type: DVD+R (Disc ID: YUDEN000-T03-00) (Speeds: 4x, 6x, 8x, 12x, 16x, 18x) I 11:49:23 Destination Media Sectors: 2,295,104 I 11:49:23 Write Mode: DVD I 11:49:23 Write Type: DAO I 11:49:23 Write Speed: 12x I 11:49:23 Link Size: Auto I 11:49:23 Test Mode: No I 11:49:23 BURN-Proof: Enabled I 11:49:26 Filling Buffer... (20 MB) I 11:49:27 Writing LeadIn... I 11:49:52 Writing Image... (LBA: 0 - 2294863) I 11:56:54 Synchronising Cache... I 11:56:55 Closing Track... I 11:56:58 Finalising Disc... I 11:57:18 Image MD5: 45d3abfcfe9cecf89684d26b2d917de1 I 11:57:18 Operation Successfully Completed! - Duration: 00:07:54 I 11:57:18 Average Write Rate: 10,876 KB/s (7.9x) - Maximum Write Rate: 14,345 KB/s (10.4x) This was a terrable burn and is unacceptable! I should have reached the 12x burn speed I selected and should have been completed the burn around 6:00 or less. Additional Info:
  21. Problem: Imgburn Buffer stays at 100% but Device Buffer bounces around causing the DVD burner to never actually reach/sustain the speed selected for the burn. Info: For the last few hours I've been running tests and found something interesting. Imgburn 2.3.1.0 ALWAYS worked perfectly when I burned a single layer DVD+R which I noticed the Buffer was at 100% and the Device Buffer remained around 90% and NEVER bounced around extremely causing the burner to reach the 12x speed I selected and a burning time of around 6:09. With Imgburn 2.3.2.0 the Device Buffer bounced around causing the burner to never reach or sustain the 12x speed I selected and the burning time would be around 8:00. I installed/uninstalled both versions multiple times and always got the same results. My question is, what exactly has changed between version 2.3.1.0 which worked and 2.3.2.0 to cause the Device Buffer to effect performance? I checked every tab in the program and read the fix list but only found the following: Version 2.3.1.0 Changed: Optimised the file system parsing code. Changed: Set default write buffer size to 40MB for people with 1GB of RAM or more (actually set at 980MB rather than 1GB this time). Changed: Upgraded to NSIS v2.25. Could any of the above changes been changed in version 2.3.2.0 to cause the current Device Buffer problem? Everything worked perfectly in 2.3.1.0 so something must have been changed. Hardware: I'm using the latest Pioneer 112D burner with the latest 1.15 firmware (NOT hacked). I'm using Tayo Yuden 16x DVD+R single layer media on Windows XP.
  22. Thanks for the reply! So according to your above reply, it's probably the latest version of imgburn that's causing this since it now handles/shows the buffer recovery. Everything I burn works ok it's just that I keep getting buffers dropping and threshold messages. I'm looking forward to the new version of imgburn to be released and hope it resolves the buffer issue everyone seems to be having. Thanks again for the hard work in making imgburn the best!
  23. The hard drive is set to UDMA-5 and the Plextor is set to UDMA-2. The hard drive has been defragmented and imgburn is running at its default settings. Both the buffer and device buffer in imgburn quickly drops then jumps back to full and repeats again. This doesn't always happen with every burn and when it does, it may be once or as much as 5-6 times. I've got everything unchecked in the 'Startup' tab using msconfig so nothing should be running in the background. I'm not sure how to check what size I have my buffer set to but everything should be at default settings. The Plextor comes with a 2mb buffer. If you need anymore info, please let me know and I'll get it for you. By the way, this has been occuring a lot with this version and the last version of imgburn I believe. The early versions never gave me any problems.
  24. I keep having my buffers dropping to 0%/emptying and threshold messages. I'm using Taiyo Yuden 16X DVD+R media and I have the most recent firmware update on my Plextor PX-708A. I never have problems burning using other applications/software. Here's all the details below: I 13:14:33 ImgBurn Version 2.1.0.0 started! I 13:14:33 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2) I 13:14:33 Initialising SPTI... I 13:14:33 Searching for SCSI / ATAPI devices... I 13:14:33 Found 1 DVD-ROM and 1 DVD?RW! I 13:18:47 Operation Started! I 13:18:47 Source File: C:\DVD - C****\hnr-c****-proper.img I 13:18:47 Source File Sectors: 2,271,415 (MODE1/2048) I 13:18:47 Source File Size: 4,651,857,920 bytes I 13:18:47 Source File Volume Identifier: C**** I 13:18:47 Source File Application Identifier: MKISOFS ISO 9660/HFS FILESYSTEM BUILDER & CDRECORD CD-R/DVD CREATOR © 1993 E.YOUNGDALE © 1997 J.PEARSON/J.SCHILLING I 13:18:47 Source File Implementation Identifier: mkisofs I 13:18:47 Source File File System(s): ISO9660, UDF (1.02) I 13:18:47 Destination Device: [1:0:0] PLEXTOR DVDR PX-708A 1.12 (D:) (ATAPI) I 13:18:47 Destination Media Type: DVD+RW (Disc ID: RICOHJPN-W11-01) (Speeds: 2.4x, 4x) I 13:18:47 Destination Media Sectors: 2,295,104 I 13:18:47 Write Mode: DVD I 13:18:47 Write Type: DAO I 13:18:47 Write Speed: MAX I 13:18:47 Link Size: Auto I 13:18:47 Test Mode: No I 13:18:47 BURN-Proof: Enabled I 13:18:48 Filling Buffer... I 13:18:49 Writing LeadIn... I 13:18:54 Writing Image... W 13:29:32 Waiting for buffers to recover... W 13:29:38 Waiting for hard disk activity to reach threshold level... I 13:29:39 Writing Image... W 13:30:12 Waiting for buffers to recover... W 13:30:25 Waiting for hard disk activity to reach threshold level... I 13:30:26 Writing Image... W 13:30:44 Waiting for buffers to recover... W 13:30:53 Waiting for hard disk activity to reach threshold level... I 13:30:54 Writing Image... W 13:31:36 Waiting for buffers to recover... W 13:31:39 Waiting for hard disk activity to reach threshold level... I 13:31:40 Writing Image... I 13:33:45 Synchronising Cache... I 13:33:46 Closing Session... I 13:33:47 Image MD5: 3c8e4e8da9a30327010c56a97fa88136 I 13:33:47 Operation Successfully Completed! - Duration: 00:15:00 I 13:33:47 Average Write Rate: 5,098 KB/s (3.7x) - Maximum Write Rate: 5,603 KB/s (4.0x) ---------------------------------------------------- Filter Driver Load Order http://www.bustrace.com ---------------------------------------------------- Upper Device Filter: redbook Device Object: PLEXTOR DVDR PX-708A Lower Class Filter: AnyDVD Lower Device Filter: imapi Driver Name: redbook.sys File Location: c:\windows\system32\drivers File Description: Redbook Audio Filter Driver File Version: 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158) [5.1.2600.2180] Product Name: Microsoft? Windows? Operating System Product Version: 5.1.2600.2180 [5.1.2600.2180] Company Name: Microsoft Corporation Driver Name: anydvd.sys File Location: c:\windows\system32\drivers File Description: AnyDVD Filter Driver File Version: 6.1.0.2 [6.1.0.2] Product Name: AnyDVD Product Version: 6.1.0.2 [6.1.0.2] Company Name: SlySoft, Inc. Driver Name: imapi.sys File Location: c:\windows\system32\drivers File Description: IMAPI Kernel Driver File Version: 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158) [5.1.2600.2180] Product Name: Microsoft? Windows? Operating System Product Version: 5.1.2600.2180 [5.1.2600.2180] Company Name: Microsoft Corporation
  25. All it means is that your HD can't supply your burner with data quickly enough. It can happen if your burner and HD share an IDE channel or your source is a slow network drive, for example. I've been having this problem almost every time I burn. I always use TY media and always burn at 4X for qulaity. What's the solution to resolve this issue? I'm using a desktop at home and everythings in the startup tab in msconfig has been unchecked so there's nothing running when I burn. -D j K i l l a-
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.