Jump to content


  • Posts

  • Joined

  • Last visited

About jameson

  • Birthday 09/06/1935

Profile Information

  • Gender
  • Location
    Brisbane Australia
  • Interests

jameson's Achievements

ISF Newbie

ISF Newbie (1/5)

  1. Is AVI format ok to burn a Dvd with Imgburn?
  2. There was nothing on the new Dvd+rw i bought but when using them to burn it says must be formatted and then erasing takes place even though there`s supposed to be nothing on them. Cd burner xp won`t have them but will do Dvd-r as will Img burn without formatting. I`ve yet to get some dvd-rw and try them. Using the + one`s is cumbersome and takes a long time. Strange.
  3. Is it only IMG BURN? Maybe they have the answer?
  4. yes, but i use Dvd-r and Dvd-rw regularly and have no problem with formatting on them. Dvd+ is the problem.
  5. I`ve got version on my computer, is that the latest version? Also i recently found that IMG BURN requires Dvd+RW (Verbatim) to be formatted/erased. I use Taiyo Yuden Dvd-r and other Dvd RW frequently and don`t experience the formatting. I thought it strange that new discs have to be erased, and the process is cumbersome. I also read that later versions of IMG BURN don`t require this. Could you advise please?
  6. I always check the source discs, it seemed ok. When played it cut off in the final title.
  7. It said the burn completed successfully but it didn`t burn fully. When played it goes to the final title and doesn`t complete the movie. The log is here below. 09:44:06 ImgBurn Version started! I 09:44:06 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 3, v.3282) I 09:44:06 Total Physical Memory: 1,965,276 KiB - Available: 1,172,656 KiB I 09:44:06 Initialising SPTI... I 09:44:06 Searching for SCSI / ATAPI devices... I 09:44:07 -> Drive 1 - Info: ASUS DRW-1814BL 1.13 (D:) (ATA) I 09:44:07 Found 1 DVD±RW/RAM! I 09:44:44 Operation Started! I 09:44:44 Source File: C:\IRON_MAN_3.ISO I 09:44:44 Source File Sectors: 1,359,066 (MODE1/2048) I 09:44:44 Source File Size: 2,783,367,168 bytes I 09:44:44 Source File Volume Identifier: IRON_MAN_3 I 09:44:44 Source File Volume Set Identifier: 00A02A9FDVDSHRNK I 09:44:44 Source File Implementation Identifier: DVD Shrink I 09:44:44 Source File File System(s): ISO9660, UDF (1.02) I 09:44:44 Destination Device: [0:0:0] ASUS DRW-1814BL 1.13 (D:) (ATA) I 09:44:44 Destination Media Type: DVD-R (Disc ID: TYG03) I 09:44:44 Destination Media Supported Write Speeds: 4x, 8x, 10x, 12x, 16x I 09:44:44 Destination Media Sectors: 2,297,888 I 09:44:44 Write Mode: DVD I 09:44:44 Write Type: DAO I 09:44:44 Write Speed: 6x I 09:44:44 Link Size: Auto I 09:44:44 Lock Volume: Yes I 09:44:44 Test Mode: No I 09:44:44 OPC: No I 09:44:44 BURN-Proof: Enabled I 09:44:44 Write Speed Successfully Set! - Effective: 8,310 KB/s (6x) I 09:44:45 Filling Buffer... (40 MiB) I 09:44:45 Writing LeadIn... I 09:45:19 Writing Session 1 of 1... (1 Track, LBA: 0 - 1359065) I 09:45:19 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 1359065) I 09:51:30 Synchronising Cache... I 09:51:56 Exporting Graph Data... I 09:51:56 Graph Data File: C:\Documents and Settings\Admin\Application Data\ImgBurn\Graph Data Files\ASUS_DRW-1814BL_1.13_TUESDAY-AUGUST-27-2013_9-44_AM_TYG03_6x.ibg I 09:51:56 Export Successfully Completed! I 09:51:56 Operation Successfully Completed! - Duration: 00:07:08 I 09:51:56 Average Write Rate: 7,326 KiB/s (5.4x) - Maximum Write Rate: 8,205 KiB/s (6.1x) I 09:52:31 Close Request Acknowledged I 09:52:31 Closing Down... I 09:52:31 Shutting down SPTI... I 09:52:31 ImgBurn closed! ; ;
  8. OK, thank you, just a little more scrolling down. Cheers
  9. I received a guide from Dvd Fab regarding IMG Burn Auto write speed. In it shows ( see attached named "auto not)where under the red arrow the words auto and max are. In my Img burn version there`s only the words settings-write speed-copies.(see attached named write speed) Is this correct or, is Dvd Fab using an earlier version??
  10. Could you explain the difference between Build and Write modes please? When i go through DVD FAB>DVD Shrink>IMG Burn the mode is write. Is burning in both modes ok for playing dvds on computer and standalone dvd players?? My attachment shows a message i get sometimes .
  11. Thanks i`ll get back to you soon.
  12. Thank You. I did`t have the original log so i used the problem disc to create the image and then wrote the files to another disc thus creating a log from that as follows hope that`s ok. ; //****************************************\\ ; ImgBurn Version - Log ; Thursday, 29 July 2010, 12:27:47 ; \\****************************************// ; ; I 12:10:53 ImgBurn Version started! I 12:10:53 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 3, v.3282) I 12:10:53 Total Physical Memory: 1,965,276 KB - Available: 1,348,256 KB I 12:10:53 Initialising SPTI... I 12:10:53 Searching for SCSI / ATAPI devices... I 12:10:53 -> Drive 1 - Info: HL-DT-ST DVDRAM GH22NS50 TN02 (D:) (ATA) I 12:10:53 Found 1 DVD±RW/RAM! I 12:11:52 Operation Started! I 12:11:52 Source File: C:\ENGELBERT_HUMPE.ISO I 12:11:52 Source File Sectors: 2,286,112 (MODE1/2048) I 12:11:52 Source File Size: 4,681,957,376 bytes I 12:11:52 Source File Volume Identifier: ENGELBERT_HUMPE I 12:11:52 Source File Volume Set Identifier: 3CFC4613C303B9EC I 12:11:52 Source File Implementation Identifier: Nero I 12:11:52 Source File File System(s): ISO9660, UDF (1.02) I 12:11:52 Destination Device: [2:1:0] HL-DT-ST DVDRAM GH22NS50 TN02 (D:) (ATA) I 12:11:52 Destination Media Type: DVD+RW (Disc ID: MKM-A02-00) (Speeds: 2.4x, 4x) I 12:11:52 Destination Media Sectors: 2,295,104 I 12:11:52 Write Mode: DVD I 12:11:52 Write Type: DAO I 12:11:52 Write Speed: 4x I 12:11:52 Link Size: Auto I 12:11:52 Lock Volume: Yes I 12:11:52 Test Mode: No I 12:11:52 OPC: No I 12:11:52 BURN-Proof: Enabled I 12:11:52 Write Speed Successfully Set! - Effective: 5,540 KB/s (4x) I 12:11:52 Book Type Setting: N/A I 12:11:52 Filling Buffer... (40 MB) I 12:11:53 Writing LeadIn... I 12:12:02 Writing Session 1 of 1... (1 Track, LBA: 0 - 2286111) I 12:12:02 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 2286111) I 12:26:07 Synchronising Cache... I 12:26:09 Closing Session... I 12:26:10 Exporting Graph Data... I 12:26:10 Graph Data File: C:\Documents and Settings\Admin\Application Data\ImgBurn\Graph Data Files\HL-DT-ST_DVDRAM_GH22NS50_TN02_THURSDAY-JULY-29-2010_12-11_PM_MKM-A02-00_4x.ibg I 12:26:10 Export Successfully Completed! I 12:26:10 Operation Successfully Completed! - Duration: 00:14:18 I 12:26:10 Average Write Rate: 5,417 KB/s (3.9x) - Maximum Write Rate: 5,592 KB/s (4.0x) I 12:27:46 Close Request Acknowledged I 12:27:46 Closing Down... I 12:27:47 Shutting down SPTI... I 12:27:47 ImgBurn closed!
  13. Some dvd movies play for a while and stop. Occassionally some play ok no stop. I use Taiyo Yuden blank media and clean the lens in my pc and standalone dvd player regularly and have upgraded the firmware in my burner. Is there settings in IMG Burn i should be aware of please?
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.