Have read a bunch of other posts related to this message and tried several suggestions there ... updated the firmware, tried setting different write speeds ... no joy.
The blu-ray burner is new and am using Verbatim BD-R DL media.
Used ImgBurn in Build mode to copy about a gig of data to the disc. Worked fine. Went to copy some more files and ... get the 'Disc not empty' message and the copy icon is disabled. Tried creating an image from the files with the idea that maybe the image file could be written, but no.
If I put in a perfectly clean disc, the icon is enabled.
But the point is, I have a 50G disc with 1G of data on it ... and can't figure out how to write anything else to it.
I gather from previous posts that 'Status: Complete' means something like the burner thinks the disc is full or no longer writable. Don't understand why that should be.
Thanks in advance.
PIONEER BD-RW BDR-206 1.05 (SCSI)
Current Profile: BD-R
Disc Information:
Status: Complete
State of Last Session: Complete
Erasable: No
Sessions: 1
Sectors: 535,424
Size: 1,096,548,352 bytes
Time: 119:00:74 (MM:SS:FF)
Supported Write Speeds: 2x, 4x, 6x, 8x
TOC Information:
Session 1... (LBA: 0)
-> Track 01 (Mode 1, LBA: 0 - 535423)
-> LeadOut (LBA: 535424)
Disc Definition Structure:
Certified: No
Scanned: No
Manufacturers Name: PIONEER
Additional ID: BD-RW BDR-206
Serial Number: JHDP003087WL
BD Disc Information (L0):
Disc ID: VERBAT-IMf-000
Disc Type: BD-R
Disc Size: 120mm
Disc Class: 0
Disc Version: 1
Number of Layers: 2
Layer Type: Writable
DVD Layer Present: No
CD Layer Present: No
Channel Bit Length: 74.5nm (25GB Per Layer)
Push-Pull Polarity: Positive
Recorded Mark Polarity: HTL
BCA Present: Yes
Maximum Transfer Rate: Not Specified
First PAA of Data Zone: 131,072
Last PAA of Data Zone: 1,658,494
BD Disc Information (L1):
Disc ID: VERBAT-IMf-000
Disc Type: BD-R
Disc Size: 120mm
Disc Class: 0
Disc Version: 1
Number of Layers: 2
Layer Type: Writable
DVD Layer Present: No
CD Layer Present: No
Channel Bit Length: 74.5nm (25GB Per Layer)
Push-Pull Polarity: Positive
Recorded Mark Polarity: HTL
BCA Present: Yes
Maximum Transfer Rate: Not Specified
First PAA of Data Zone: 2,535,808
Last PAA of Data Zone: 4,063,230
Layer Information:
Layer 0 Sectors: 12,219,392 (2282%)
Layer 1 Sectors: 4,283,283,328 (-2182%)
Performance (Write Speed):
Descriptor 1...
-> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00
-> EL: 24438783 (0x0174E7FF)
-> RS: 8,990 KB/s (2x) - WS: 8,990 KB/s (2x)
Descriptor 2...
-> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00
-> EL: 24438783 (0x0174E7FF)
-> RS: 17,980 KB/s (4x) - WS: 17,980 KB/s (4x)
Descriptor 3...
-> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00
-> EL: 24438783 (0x0174E7FF)
-> RS: 26,970 KB/s (6x) - WS: 26,970 KB/s (6x)
Descriptor 4...
-> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00
-> EL: 24438783 (0x0174E7FF)
-> RS: 35,960 KB/s (8x) - WS: 35,960 KB/s (8x)
I 17:09:58 ImgBurn Version 2.5.5.0 started!
I 17:09:58 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3)
I 17:09:58 Total Physical Memory: 3,405,208 KB - Available: 1,566,816 KB
W 17:09:58 Duplex Secure's SPTD driver can have a detrimental effect on drive performance.
I 17:09:58 Initialising SPTI...
I 17:09:58 Searching for SCSI / ATAPI devices...
I 17:09:58 -> Drive 1 - Info: PIONEER BD-RW BDR-206 1.05 (D:) (SCSI)
I 17:09:58 Found 1 BD-RE!
I 17:12:52 Operation Started!
I 17:12:52 Building Image Tree...
I 17:13:16 Calculating Totals...
I 17:13:16 Preparing Image...
I 17:13:17 Contents: 263 Files, 22 Folders
I 17:13:17 Content Type: Data
I 17:13:17 Data Type: MODE1/2048
I 17:13:17 File System(s): UDF (1.02)
I 17:13:17 Volume Label: MSSQL.1
I 17:13:17 Size: 20,770,772,619 bytes
I 17:13:17 Sectors: 10,142,081
I 17:13:17 Image Size: 20,772,159,488 bytes
I 17:13:17 Image Sectors: 10,142,656
I 17:13:21 Operation Successfully Completed! - Duration: 00:00:29
I 17:13:21 Operation Started!
I 17:13:21 Image Contents: 263 Files, 22 Folders
I 17:13:21 Image Sectors: 10,142,656 (MODE1/2048)
I 17:13:21 Image Size: 20,772,159,488 bytes
I 17:13:21 Image Volume Identifier: MSSQL.1
I 17:13:21 Image Volume Set Identifier: 3E63899A009AC3BF
I 17:13:21 Image Application Identifier: ImgBurn v2.5.5.0
I 17:13:21 Image Implementation Identifier: ImgBurn
I 17:13:21 Image File System(s): UDF (1.02)
I 17:13:21 Destination File: c:\temp\dbImage_20110303.iso
I 17:13:21 Destination Free Space: 140,296,523,776 Bytes (137,008,324 KB) (133,797 MB) (130 GB)
I 17:13:21 Destination File System: NTFS
I 17:13:21 File Splitting: Auto
I 17:13:21 Writing Image...
W 17:22:32 Failed to open file: 'H:\MSSQL.1\MSSQL\Data\ReportServer.mdf'
W 17:22:32 Reason: The process cannot access the file because it is being used by another process.
W 17:22:33 Failed to open file: 'H:\MSSQL.1\MSSQL\Data\ReportServer_log.LDF'
W 17:22:33 Reason: The process cannot access the file because it is being used by another process.
W 17:22:35 Failed to open file: 'H:\MSSQL.1\MSSQL\Data\ReportServerTempDB.mdf'
W 17:22:35 Reason: The process cannot access the file because it is being used by another process.
W 17:22:36 Failed to open file: 'H:\MSSQL.1\MSSQL\Data\ReportServerTempDB_log.LDF'
W 17:22:36 Reason: The process cannot access the file because it is being used by another process.
I 17:22:40 Operation Successfully Completed! - Duration: 00:09:18
I 17:22:40 Average Write Rate: 36,353 KB/s (8.1x) - Maximum Write Rate: 107,808 KB/s (24.0x)