Jump to content

JWri

Members
  • Posts

    4
  • Joined

  • Last visited

Everything posted by JWri

  1. I will get hold of a disc cleaner tomorrow, but seems strange that burns single layer discs no problem? Only got 4 more Verbatim discs to try and then that will be the whole batch of 25 as coasters!!! Thanks for all the suggestions.
  2. Your Pioneer burner supports that media at the above shown speeds. If 2.4x isn't working anymore, try faster speeds like 4x and 6x. Have you tried burning with your LG burner? Dual-layer media other than Verbatim is dodgy in most cases, so stick with Verbatim whenever you can. In fairness I have tried several other routes, such as your suggested faster speed of 4x and 8x on my PIONEER 116D with Verbatim DVD+R DL (just have not got the logs). Did several times, and always a failure! Have also tried, again without success, with both the Verbs and Memorex DL discs on the LG burner - no luck. Yet I can burn Single Layer on either burner??!! Totally agree with your comment about using Verbatim discs though, just happened to have a batch of unused Memorex which I was using in an attempt to understand this issue. As I mentioned, until a few days ago, have been successfully burning on either the PIONEER 116D or the LG using Verbatim for last 3 years. Very strange!
  3. Thanks guys! Sorry for not doing so. Here are a couple of 'cut and paste' IMG Burn sessions to give you an idea. EXAMPLE (1) I 12:19:05 ImgBurn Version 2.5.6.0 started! I 12:19:06 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 3) I 12:19:06 Total Physical Memory: 1,570,908 KB - Available: 511,044 KB I 12:19:06 Initialising SPTI... I 12:19:06 Searching for SCSI / ATAPI devices... I 12:19:06 -> Drive 1 - Info: HL-DT-ST DVD-RAM GH22LP20 2.00-09 (D:) (ATA) I 12:19:06 -> Drive 2 - Info: PIONEER DVD-RW DVR-116D 1.09 (E:) (ATA) I 12:19:06 -> Drive 3 - Info: Image Simulation 1.0g (H:) (SCSI) I 12:19:06 Found 1 CD-ROM, 1 DVD±RW and 1 DVD±RW/RAM! I 12:30:44 Operation Started! I 12:30:44 Source File: F:\Renault Carminat CNC v31.1 2011-2012\cnc v31.1.iso I 12:30:44 Source File Sectors: 4,079,752 (MODE1/2048) I 12:30:44 Source File Size: 8,355,332,096 bytes I 12:30:44 Source File Volume Set Identifier: 3e5c5252 I 12:30:44 Source File Implementation Identifier: SONY DISC TEC. I 12:30:44 Source File File System(s): ISO9660, UDF (1.02) I 12:30:44 Destination Device: [2:1:0] PIONEER DVD-RW DVR-116D 1.09 (E:) (ATA) I 12:30:44 Destination Media Type: DVD+R DL (Disc ID: MBIPG101-R10-65) I 12:30:44 Destination Media Supported Write Speeds: 2.4x, 4x, 6x, 8x I 12:30:44 Destination Media Sectors: 4,173,824 I 12:30:44 Write Mode: DVD I 12:30:44 Write Type: DAO I 12:30:44 Write Speed: 2.4x I 12:30:44 Link Size: Auto I 12:30:44 Lock Volume: Yes I 12:30:44 Test Mode: No I 12:30:44 OPC: No I 12:30:44 BURN-Proof: Enabled I 12:30:44 Write Speed Successfully Set! - Effective: 3,324 KB/s (2.4x) I 12:30:44 Advanced Settings - Optimal Writing Speed: Yes I 12:30:44 Optimal L0 Data Zone Capacity: 2,039,888 I 12:30:44 Optimal L0 Data Zone Method: ECC Block Boundary I 12:31:08 Set L0 Data Zone Capacity Succeeded! I 12:31:09 Filling Buffer... (40 MB) I 12:31:10 Writing LeadIn... I 12:31:11 Writing Session 1 of 1... (1 Track, LBA: 0 - 4079751) I 12:31:11 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 4079751) I 12:31:11 Writing Layer 0... (LBA: 0 - 2039887) W 12:31:17 Failed to Write Sectors 8064 - 8095 - Reason: Write Error W 12:31:17 Retrying (1 of 20)... W 12:31:20 Retry Failed - Reason: Invalid Address For Write W 12:31:20 Retrying (2 of 20)... W 12:31:20 Retry Failed - Reason: Invalid Address For Write W 12:31:20 Retrying (3 of 20)... W 12:31:20 Retry Failed - Reason: Invalid Address For Write W 12:31:20 Retrying (4 of 20)... W 12:31:20 Retry Failed - Reason: Invalid Address For Write W 12:31:20 Retrying (5 of 20)... W 12:31:20 Retry Failed - Reason: Invalid Address For Write W 12:31:20 Retrying (6 of 20)... W 12:31:20 Retry Failed - Reason: Invalid Address For Write W 12:31:20 Retrying (7 of 20)... W 12:31:20 Retry Failed - Reason: Invalid Address For Write W 12:31:20 Retrying (8 of 20)... W 12:31:20 Retry Failed - Reason: Invalid Address For Write W 12:31:20 Retrying (9 of 20)... W 12:31:20 Retry Failed - Reason: Invalid Address For Write W 12:31:20 Retrying (10 of 20)... W 12:31:20 Retry Failed - Reason: Invalid Address For Write W 12:31:20 Retrying (11 of 20)... W 12:31:20 Retry Failed - Reason: Invalid Address For Write W 12:31:20 Retrying (12 of 20)... W 12:31:20 Retry Failed - Reason: Invalid Address For Write W 12:31:20 Retrying (13 of 20)... W 12:31:20 Retry Failed - Reason: Invalid Address For Write W 12:31:20 Retrying (14 of 20)... W 12:31:20 Retry Failed - Reason: Invalid Address For Write W 12:31:20 Retrying (15 of 20)... W 12:31:20 Retry Failed - Reason: Invalid Address For Write W 12:31:20 Retrying (16 of 20)... W 12:31:20 Retry Failed - Reason: Invalid Address For Write W 12:31:20 Retrying (17 of 20)... W 12:31:20 Retry Failed - Reason: Invalid Address For Write W 12:31:20 Retrying (18 of 20)... W 12:31:20 Retry Failed - Reason: Invalid Address For Write W 12:31:20 Retrying (19 of 20)... W 12:31:20 Retry Failed - Reason: Invalid Address For Write W 12:31:20 Retrying (20 of 20)... W 12:31:20 Retry Failed - Reason: Invalid Address For Write E 12:37:35 Failed to Write Sectors 8064 - 8095 - Reason: Write Error E 12:37:35 Next Writable Address: 7296 I 12:37:35 Synchronising Cache... W 12:37:38 User opted to skip the 'Close Track/Session/Disc' functions. E 12:37:38 Failed to Write Image! I 12:37:38 Exporting Graph Data... I 12:37:39 Graph Data File: C:\Documents and Settings\Owner\Application Data\ImgBurn\Graph Data Files\PIONEER_DVD-RW_DVR-116D_1.09_06-OCTOBER-2011_12-30_MBIPG101-R10-65_2.4x.ibg I 12:37:39 Export Successfully Completed! E 12:37:39 Operation Failed! - Duration: 00:06:54 I 12:37:39 Average Write Rate: 42 KB/s (0.0x) - Maximum Write Rate: 2,914 KB/s (2.1x) I 12:37:41 Close Request Acknowledged I 12:37:41 Closing Down... I 12:37:43 Shutting down SPTI... I 12:37:43 ImgBurn closed! EXAMPLE (2): I 11:59:19 ImgBurn Version 2.5.6.0 started! I 11:59:19 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 3) I 11:59:19 Total Physical Memory: 1,570,908 KB - Available: 586,076 KB I 11:59:19 Initialising SPTI... I 11:59:19 Searching for SCSI / ATAPI devices... I 11:59:19 -> Drive 1 - Info: HL-DT-ST DVD-RAM GH22LP20 2.00-09 (D:) (ATA) I 11:59:20 -> Drive 2 - Info: PIONEER DVD-RW DVR-116D 1.09 (E:) (ATA) I 11:59:20 -> Drive 3 - Info: Image Simulation 1.0g (H:) (SCSI) I 11:59:20 Found 1 CD-ROM, 1 DVD±RW and 1 DVD±RW/RAM! I 12:01:54 Operation Started! I 12:01:54 Source File: F:\Landrover 2011-2012\464210-7550.MDS I 12:01:54 Source File Sectors: 4,060,160 (MODE1/2048) I 12:01:54 Source File Size: 8,315,207,680 bytes I 12:01:54 Source File Volume Identifier: 464210-7550 I 12:01:54 Source File Application Identifier: Session Offset : 0 VTC Sector Offset: 0 I 12:01:54 Source File Implementation Identifier: Smart Storage, Inc. I 12:01:54 Source File File System(s): ISO9660, Joliet, UDF (1.02) I 12:01:54 Destination Device: [2:1:0] PIONEER DVD-RW DVR-116D 1.09 (E:) (ATA) I 12:01:54 Destination Media Type: DVD+R DL (Disc ID: MBIPG101-R10-65) I 12:01:54 Destination Media Supported Write Speeds: 2.4x, 4x, 6x, 8x I 12:01:54 Destination Media Sectors: 4,173,824 I 12:01:54 Write Mode: DVD I 12:01:54 Write Type: DAO I 12:01:54 Write Speed: 2.4x I 12:01:54 Link Size: Auto I 12:01:54 Lock Volume: Yes I 12:01:54 Test Mode: No I 12:01:54 OPC: No I 12:01:54 BURN-Proof: Enabled I 12:01:54 Write Speed Successfully Set! - Effective: 3,324 KB/s (2.4x) I 12:01:54 Advanced Settings - Optimal Writing Speed: Yes I 12:01:54 Optimal L0 Data Zone Capacity: 2,086,912 I 12:01:54 Optimal L0 Data Zone Method: Copied From Original Disc I 12:02:15 Set L0 Data Zone Capacity Succeeded! I 12:02:16 Filling Buffer... (40 MB) I 12:02:17 Writing LeadIn... I 12:02:19 Writing Session 1 of 1... (1 Track, LBA: 0 - 4060159) I 12:02:19 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 4060159) I 12:02:19 Writing Layer 0... (LBA: 0 - 2086911) W 12:05:21 Failed to Write Sectors 290304 - 290335 - Reason: Write Error W 12:05:21 Retrying (1 of 20)... W 12:05:24 Retry Failed - Reason: Invalid Address For Write W 12:05:24 Retrying (2 of 20)... W 12:05:24 Retry Failed - Reason: Invalid Address For Write W 12:05:24 Retrying (3 of 20)... W 12:05:24 Retry Failed - Reason: Invalid Address For Write W 12:05:24 Retrying (4 of 20)... W 12:05:24 Retry Failed - Reason: Invalid Address For Write W 12:05:24 Retrying (5 of 20)... W 12:05:24 Retry Failed - Reason: Invalid Address For Write W 12:05:24 Retrying (6 of 20)... W 12:05:24 Retry Failed - Reason: Invalid Address For Write W 12:05:24 Retrying (7 of 20)... W 12:05:24 Retry Failed - Reason: Invalid Address For Write W 12:05:24 Retrying (8 of 20)... W 12:05:24 Retry Failed - Reason: Invalid Address For Write W 12:05:24 Retrying (9 of 20)... W 12:05:24 Retry Failed - Reason: Invalid Address For Write W 12:05:24 Retrying (10 of 20)... W 12:05:24 Retry Failed - Reason: Invalid Address For Write W 12:05:24 Retrying (11 of 20)... W 12:05:24 Retry Failed - Reason: Invalid Address For Write W 12:05:24 Retrying (12 of 20)... W 12:05:24 Retry Failed - Reason: Invalid Address For Write W 12:05:24 Retrying (13 of 20)... W 12:05:24 Retry Failed - Reason: Invalid Address For Write W 12:05:24 Retrying (14 of 20)... W 12:05:24 Retry Failed - Reason: Invalid Address For Write W 12:05:24 Retrying (15 of 20)... W 12:05:24 Retry Failed - Reason: Invalid Address For Write W 12:05:24 Retrying (16 of 20)... W 12:05:24 Retry Failed - Reason: Invalid Address For Write W 12:05:24 Retrying (17 of 20)... W 12:05:24 Retry Failed - Reason: Invalid Address For Write W 12:05:24 Retrying (18 of 20)... W 12:05:24 Retry Failed - Reason: Invalid Address For Write W 12:05:24 Retrying (19 of 20)... W 12:05:24 Retry Failed - Reason: Invalid Address For Write W 12:05:24 Retrying (20 of 20)... W 12:05:24 Retry Failed - Reason: Invalid Address For Write E 12:06:52 Failed to Write Sectors 290304 - 290335 - Reason: Write Error E 12:06:52 Next Writable Address: 289600 I 12:06:52 Synchronising Cache... W 12:06:56 User opted to skip the 'Close Track/Session/Disc' functions. E 12:06:56 Failed to Write Image! I 12:06:56 Exporting Graph Data... I 12:06:56 Graph Data File: C:\Documents and Settings\Owner\Application Data\ImgBurn\Graph Data Files\PIONEER_DVD-RW_DVR-116D_1.09_06-OCTOBER-2011_12-01_MBIPG101-R10-65_2.4x.ibg I 12:06:56 Export Successfully Completed! E 12:06:56 Operation Failed! - Duration: 00:05:02 I 12:06:56 Average Write Rate: 2,126 KB/s (1.5x) - Maximum Write Rate: 3,387 KB/s (2.4x) I 12:07:11 Close Request Acknowledged I 12:07:11 Closing Down... I 12:07:11 Shutting down SPTI... I 12:07:11 ImgBurn closed! Hope these help? Cheers!
  4. Hi, I have searched the forum for possible answers before posting this, and dont seem able to resolve my current issue, so am hoping you guys can possibly help? Up until the last few days I have been for 3 years successfully burning DVD+R DL discs using IMG Burn on both my drives, namely PIONEER DVD-RW DVR-116D v1.09 (with latest driver 5.1.2535.0 1/7/2001)and showing as Location 1 (1)) in the IMG Location box and LG HL-DT-ST-DVD-RAM GH22LP20 (with latest driver, also ? 5.1.2535.0 1/7/2001) and showing as Location 0 (0) in the IMG Location box. Now I can only burn Single Layer (DVD+R/-R) on either of these burners. I have burnt approx 20 of the Dual Layer (combination of Verbatim MKM-003-00 and cheaper Memorex (DVD+R DL 8x)MBIPG101-R10-65. All have failed during the burn process on both burners having tried IMG BURN and also DVD Decrypter. My normal process is to burn using IMG BURN (and I am running the latest 2.5.6.0 (previously in the week was 2.5.5.0)at write speed of 2.4x with Verbatim DVD+R DL (MKM-003-00). As I said, have enjoyed this method of about 3 years and suddenly a few days ago it is impossible to burn a DL disc. I have tried to check numerous areas within the PC. On first inspection I noticed that in the PRIMARY IDE Channel>Advance Settings> DEVICE 0 DMA if available/Current transfer Mode was PIO Mode (was same for DEVICE 1), both were PIO Mode. It took me ages to find out how to change or force it to DMA mode, but after F2 into BIOS I noticed that it was as such: Drive 0 SATA-0 on Maxtor 7L25050 Drive 1 SATA-1 on Drive 2 SATA-2 on Drive 3 SATA-3 on Drive 4 PATA-0 on HL-DT-ST DVD-RAM GH22LP20 Drive 5 PATA-1 (off) DRIVE ID = Unknown I then set Drive 5 PATA-1 to ON and continued with the reboot. (NOTE: Up until this time my PIONEER 116D was not shown listed under the DEVICE MANAGER>DVD-CD ROM Drives, only the LG HL-DT-ST DVD-RAM GH22LP20). Afterwards it was listed. I then went back into the PRIMARY IDE CHANNEL<Advanced Settings> and noted that now it was showing as DEVICE 0 DMA if available with the Current Transfer Mode showing as ULTRA DMA Mode 4 (also for DEVICE 1) whereas previously they were both Current Transfer Mode PIO. I thought that this may cure it, but not! The problem with burning DL discs continues. Here is an attachment of the screen shot on my last attempt and I really am stuck as to how to proceed in an attempt to cure. Any help/suggestions would be much appreciated and I apologise in advance if I have not made myself clear. IMG BURN error 1.bmp
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.