I'm trying to burn several files using 'Build' mode on TY DVD+R. Burner is Samsung SH-203B. Everything works fine until the very end – ImgBurn shows 99% Finalize on the bottom and then error message "WaitImmediateIO Error - Program Memory Area Update Failure". I press "retry" – ImgBurn does finalizing again and then goes on to verify. Then I get a message "Operation Successfully Completed!" Looks fine so far but… my stand alone player and DVD-Rom on another computer are unable to read the disk. Both my DVD Burners can read the disk fine but Benq shows some junk in disk info:
Samsung reads disk info fine but shows DVD+R as book type:
Looks like ImgBurn fails to book type the disk (Auto change book type was checked)... Here is the log:
;
I 23:08:59 ImgBurn Version 2.3.2.0 started!
I 23:08:59 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2)
I 23:08:59 Total Physical Memory: 1,048,036 KB - Available: 757,900 KB
I 23:09:00 Initialising SPTI...
I 23:09:00 Searching for SCSI / ATAPI devices...
I 23:09:00 Found 1 CD-RW, 1 DVD±RW and 1 DVD±RW/RAM!
I 23:09:43 Operation Started!
I 23:09:43 Building Image Tree...
I 23:09:43 Checking Directory Depth...
I 23:09:43 Calculating Totals...
I 23:09:43 Preparing Image...
I 23:09:43 Checking Path Length...
I 23:09:43 Image Size: 4,186,734,592 bytes
I 23:09:43 Image Sectors: 2,044,304
I 23:09:43 Operation Successfully Completed! - Duration: 00:00:00
I 23:10:03 Operation Started!
I 23:10:03 Building Image Tree...
I 23:10:15 Checking Directory Depth...
I 23:10:15 Calculating Totals...
I 23:10:15 Preparing Image...
I 23:10:15 Checking Path Length...
I 23:10:15 Image Size: 4,186,734,592 bytes
I 23:10:15 Image Sectors: 2,044,304
I 23:10:16 Operation Successfully Completed! - Duration: 00:00:12
I 23:10:16 Operation Started!
I 23:10:16 Source File: -==/\/[BUILD IMAGE]\/\==-
I 23:10:16 Source File Sectors: 2,044,304 (MODE1/2048)
I 23:10:16 Source File Size: 4,186,734,592 bytes
I 23:10:16 Source File Volume Identifier: ******
I 23:10:16 Source File Application Identifier: ImgBurn v2.3.2.0 - The Ultimate Image Burner!
I 23:10:16 Source File File System(s): ISO9660, Joliet
I 23:10:16 Destination Device: [1:0:0] TSSTcorp CDDVDW SH-S203B SB01 (H:) (ATA)
I 23:10:16 Destination Media Type: DVD+R (Disc ID: YUDEN000-T02-00) (Speeds: 4x, 6x, 8x, 12x)
I 23:10:16 Destination Media Sectors: 2,295,104
I 23:10:16 Write Mode: DVD
I 23:10:16 Write Type: DAO
I 23:10:16 Write Speed: 4x
I 23:10:16 Link Size: Auto
I 23:10:16 Test Mode: No
I 23:10:16 BURN-Proof: Enabled
I 23:10:17 Filling Buffer... (20 MB)
I 23:10:18 Writing LeadIn...
I 23:10:25 Writing Image... (LBA: 0 - 2044303)
I 23:23:07 Synchronising Cache...
I 23:23:11 Closing Track...
I 23:23:14 Finalising Disc...
W 23:23:28 Potential 'WaitImmediateIO' Deferred Error - (0/2) - Program Memory Area Update Failure
I 23:24:58 Image MD5: 03d6571dadfd8f1dd578cc66fdd08d04
I 23:24:58 Exporting Graph Data...
I 23:24:58 Graph Data File: C:\Program Files\ImgBurn\TSSTcorp_CDDVDW_SH-S203B_SB01_SUNDAY-SEPTEMBER-09-2007_11-10_PM_YUDEN000-T02-00_4x.ibg
I 23:24:58 Export Successfully Completed!
I 23:24:58 Operation Successfully Completed! - Duration: 00:14:41
I 23:24:58 Average Write Rate: 5,372 KB/s (3.9x) - Maximum Write Rate: 5,592 KB/s (4.0x)
I 23:24:58 Operation Started!
I 23:24:58 Source Device: [1:0:0] TSSTcorp CDDVDW SH-S203B SB01 (H:) (ATA)
I 23:24:58 Source Media Type: DVD+R (Book Type: DVD+R) (Disc ID: YUDEN000-T02-00) (Speeds: 4x, 6x, 8x, 12x)
I 23:24:58 Image File: -==/\/[BUILD IMAGE]\/\==-
I 23:24:58 Image File Sectors: 2,044,304 (MODE1/2048)
I 23:24:58 Image File Size: 4,186,734,592 bytes
I 23:24:58 Image File Volume Identifier: Movies
I 23:24:58 Image File Application Identifier: ImgBurn v2.3.2.0 - The Ultimate Image Burner!
I 23:24:58 Image File File System(s): ISO9660, Joliet
I 23:24:58 Verifying Sectors... (LBA: 0 - 2044303)
I 23:30:47 Device MD5: 03d6571dadfd8f1dd578cc66fdd08d04
I 23:30:47 Image MD5: 03d6571dadfd8f1dd578cc66fdd08d04
I 23:30:48 Exporting Graph Data...
I 23:30:48 Graph Data File: C:\Program Files\ImgBurn\TSSTcorp_CDDVDW_SH-S203B_SB01_SUNDAY-SEPTEMBER-09-2007_11-10_PM_YUDEN000-T02-00_4x.ibg
I 23:30:48 Export Successfully Completed!
I 23:30:48 Operation Successfully Completed! - Duration: 00:05:49
I 23:30:48 Average Verify Rate: 11,715 KB/s (8.5x) - Maximum Verify Rate: 21,416 KB/s (15.5x)
I 23:42:38 Close Request Acknowledged
I 23:42:38 Closing Down...
I 23:42:38 Shutting down SPTI...
I 23:42:38 ImgBurn closed!
The same error happened to me about a week ago - I tried to burn few files 3 times in row with the same result. Actually one time I pressed "cancel" instead of "retry" but result was still the same. So I end up burning with nero on Benq and everything worked fine. Any ideas?