81RED
-
Posts
28 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by 81RED
-
-
Have always used Verbatim as they, in my experience, are the most compatible/least defective ones around.
Anyway, have come to the conclusion that my new drive is defective - right after posting
the above message I proceeded to burn some more normal images, and was met with more
"Power Calibration Area" errors.
Am a bit miffed with Pioneer right now, this makes it the fourth defective drive I?ve bought in less than two years, might fork out the extra cash and exchange this one for a Plextor model instead
Thank you very much for the input, appreciate it!
-
Have a rather strange problem that I hope someone can help me with:
Replaced my old trusty Pioneer DVR-108 with a new model DVR-111D today - burning
normal "non-dl" media works like a charm, but when I try to burn a DL disk I get the following
(Taken from a quick note i scribbled, as I could not find a way to get that info into the general logfile?)
"I/O Error!
Scsistatus: 0x02
Interpretation: Check Condition
CDB: xx xx xx xx xx ........
Interpretation: Send DVD Structure DVD+R DL Boundary Information
Sense Area: xx xx xx xx ....
Interpretation: Power Calibration Area Error"
Selecting "Cancel" to that, it then shows me another page of errors including
something about "Read DVD Structure Boundary Information" and "Unable to Recover TOC".
It then proceeds to fill the write-buffer, at which point I have cancelled the whole thing as I
am not very keen on wasting too many rather expensive disks.
The firmware is version 1.23 and the media I use is Verbatim. Media from the same batch worked
fine on the old 108 model.
Is my brand new drive knackered? Am I doing something obviously wrong? Any help would be greatly
appreciated.
81
"Booktype" question.
in ImgBurn Support
Posted
Would someone, for the sake of my sanity, please clarify something for me?
Having swapped a newly acquired, and quite defective Pioneer DVR-111 for a Plextor PX-750A (firmware 1.02), I am now able to burn DL media again. However, the booktype ends up with "DVDR+R DL", and I have one title that requires the booktype set to DVDROM. Going into the "booktype" menu, selecting Plextor and selecting DVD+R DL I get a "Current setting: Unknown (FAILED!)"
Am I doing something obviously stupid?
81