A New Guy

I was starting to wonder if there was a strange magnetic field (Bermuda Triangle) encircling my home. Would I have to move to be able to burn a DVD? Maybe there is a problem with the electricity? Was I going to have to generate my own? I was losing it and took a break. Sorry, rcubed. 46. Removed IDE RAID drives to make room to install the (gulp) fourth different DVD drive (Plextor PX-750A) 47. Tested 8x +DL with 100 per cent success rate. Halleluiah! I took an even longer break... 48. Returned the Plextor PX-755SA for warranty replacement and received a replacement in 5 weeks. 49. Reinstalled IDE RAID drives and the new replacement Plextor PX-755SA 50. Tested 6x +DL with 100 per cent success rate. Operation Successfully Completed A happy ending and one to tell the grand children. Thanks for all the suggestions everyone...

I am unclear on what the Microsoft updates are about. I have searched Microsoft Knowledge Base for Windows XP. I cannot seem to find anything for Serial ATA, SATA, Si 3114, or nforce4. I was able to get the SiI 3114 version 1.5.10 on the link you provided. thanks Thanks Cubed. It sounds like you went through something simular to what I am experiencing. What firmware level your Sil 3114 controller have? You can get that on boot up. 42. Changed BIOS setting to Sil3114 SATA Raid Control: SATA RAID 0,1,0+1,5. Moved 716SA and 755SA to Sil 3114 SATARaid BIOS 5.2.16. Installed Silicon Image SiI 3114 SoftRaid 5 Controller 1.5.10.0 driver. Both drives are unable to verify the DVD succussfully. 43. Changed BIOS setting to Sil3114 SATA Raid Control: SATA. Moved 716SA and 755SA to Sil 3114 SATALink BIOS 5.2.16. Its an older version but I am at the latest motherboard firmware. I do not believe there is anyway to upgrade it further. Installed Silicon Image SiI 3114 SATALink Controller 1.3.10.0 driver. Both drives were unable to verify the DVD succussfully. Since I upgraded my motherboard firmware I thought I should repeat some earlier tests. 44. Moved 716SA and 755SA to NVIDIA nForce4 Serial ATA Controller 5.10.2600.666. Both my drives were unable to verify the DVD succussfully. 45. With the Standard Dual Channel PCI IDE Controller 5.1.2600.2180, my Benq 1640 is able to verify the DVD sucessfully. All three drives have now developed a new annoying warning message from imgburn: "DeviceIoControl(IOCTL_STORAGE_MCN_CONTROL) Failed! - Media change notification has NOT been disabled." I read a post http://forum.imgburn.com/index.php?showtopic=569&st=20http://forum.imgburn.com/index.php?showtopic=569&st=20 from LUK saying that the Sil 3114 controller causes it.

Thanks. What a great feature. This disc that fails to verify on the new Plextor 755SA and my old 716SA. However it does verify successfully on my Benq 1640. Is my DFI LANPARTY UT NF4 SLI-DR Expert nForce 4 SATA not compatible with SATA drives or are both my SATA drives now broken?

I checked the Plextor website and no boards from DFI appear to have been tested. But my previous motherboard (K8N Neo2 Platinum) was compatible with both my 716SA and 755SA drives. Maybe I should buy a 4th DVD burner (IDE)? The DFI UT Lanpart DR-Expert SLI has a Silicon Image 3114 controller but it only appears to work in a RAID configuration. How can I verifying the DVD with a different drive? What software would I use? Or do you mean simply watching it? Thanks Cuber....

It is just like old times again. I have been making coaster after coaster. I had to take a break as I was out of money and Verbatim DVD+R DLs. I have since spent another $500 on this computer. But of course the second BFG GeForce 7900 GS OC (PCIe video adapter) was not meant to fix this problem. However I did try replacing my RAM with 2 x 1GB Mushkin Redline PC-4000. Also I have pulled out my 200 Gb Maxtor DiamondMax 10 SATA drive and stuck in an old 40GB Western Digital Caviar WD400EB drive in its place for testing purposes. Should a 5400 RPM hard drive be good enough or should I replace it with 7200 RPM? I have 4 new spindles of Verbatim DVD+R DLs. 37. tested new Plextor PX-755SA, 2.4, and +R DL. good burn 38. tested new Plextor PX-755SA, 2.4, and +R DL. good burn 39. tested new Plextor PX-755SA, 2.4, and +R DL. bad burn I 23:21:49 ImgBurn Version 2.1.0.0 started! I 23:21:49 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2) I 23:21:49 Initialising SPTI... I 23:21:49 Searching for SCSI / ATAPI devices... I 23:21:49 Found 1 DVD?RW! I 23:37:58 Operation Started! I 23:37:58 Source File: C:\A.MDS I 23:37:58 Source File Sectors: 3,794,774 (MODE1/2048) I 23:37:58 Source File Size: 7,771,697,152 bytes I 23:37:58 Source File Volume Identifier: A I 23:37:58 Source File Implementation Identifier: A I 23:37:58 Source File File System(s): ISO9660, UDF (1.02) I 23:37:58 Destination Device: [2:0:0] PLEXTOR DVDR PX-755A 1.06 (F:) (ATA) I 23:37:58 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2.4x, 4x, 6x) I 23:37:58 Destination Media Sectors: 4,173,824 I 23:37:58 Write Mode: DVD I 23:37:58 Write Type: DAO I 23:37:58 Write Speed: 2.4x I 23:37:58 Link Size: Auto I 23:37:58 Test Mode: No I 23:37:58 BURN-Proof: Enabled I 23:37:58 Optimal L0 Data Zone Capacity: 2,081,008 I 23:37:58 Optimal L0 Data Zone Method: Copied From Original Disc I 23:37:58 Filling Buffer... I 23:37:59 Writing LeadIn... I 23:38:48 Writing Image... I 23:38:48 Writing Layer 0... (LBA: 0 - 2081007) I 00:00:15 Writing Layer 1... (LBA: 2081008 - 3794773) W 00:10:05 Waiting for buffers to recover... W 00:10:15 Waiting for hard disk activity to reach threshold level... I 00:10:22 Writing Image... I 00:18:30 Synchronising Cache... I 00:18:34 Closing Track... I 00:18:36 Finalising Disc... I 00:23:29 Image MD5: 2551ea3652b50c4cc1ef0a32d6fd67d8 I 00:23:31 Operation Successfully Completed! - Duration: 00:45:31 I 00:23:31 Average Write Rate: 3,186 KB/s (2.3x) - Maximum Write Rate: 3,360 KB/s (2.4x) I 00:23:31 Cycling Tray before Verify... I 00:24:20 Device Ready! I 00:24:22 Operation Started! I 00:24:22 Source Device: [2:0:0] PLEXTOR DVDR PX-755A 1.06 (F:) (ATA) I 00:24:22 Source Media Type: DVD+R DL (Book Type: DVD-ROM) (Disc ID: MKM-001-00) (Speeds: 2.4x, 4x, 6x) I 00:24:22 Image File: C:\A.MDS I 00:24:22 Image File Sectors: 3,794,774 (MODE1/2048) I 00:24:22 Image File Size: 7,771,697,152 bytes I 00:24:22 Image File Volume Identifier: A I 00:24:22 Image File Implementation Identifier: A I 00:24:22 Image File File System(s): ISO9660, UDF (1.02) I 00:24:22 Verifying Sectors... E 01:08:03 Failed to read Sector 1621744 - L-EC Uncorrectable Error E 01:08:03 Sector 1621744 maps to File: VIDEO_TS\VTS_01_4.VOB E 01:08:03 Failed to Verify Sectors! E 01:08:03 Operation Failed! - Duration: 00:43:40 I 01:08:03 Average Verify Rate: 1,237 KB/s (0.9x) - Maximum Verify Rate: 9,527 KB/s (6.9x) 40. tested new Plextor PX-755SA, 2.4, and +R DL. bad burn I 09:10:35 ImgBurn Version 2.1.0.0 started! I 09:10:35 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2) I 09:10:35 Initialising SPTI... I 09:10:35 Searching for SCSI / ATAPI devices... I 09:10:35 Found 1 DVD?RW! I 09:11:51 Operation Started! I 09:11:51 Source File: C:\A.MDS I 09:11:51 Source File Sectors: 3,794,774 (MODE1/2048) I 09:11:51 Source File Size: 7,771,697,152 bytes I 09:11:51 Source File Volume Identifier: A I 09:11:51 Source File Implementation Identifier: A I 09:11:51 Source File File System(s): ISO9660, UDF (1.02) I 09:11:51 Destination Device: [2:0:0] PLEXTOR DVDR PX-755A 1.06 (F:) (ATA) I 09:11:51 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2.4x, 4x, 6x) I 09:11:51 Destination Media Sectors: 4,173,824 I 09:11:51 Write Mode: DVD I 09:11:51 Write Type: DAO I 09:11:51 Write Speed: 2.4x I 09:11:51 Link Size: Auto I 09:11:51 Test Mode: No I 09:11:51 BURN-Proof: Enabled I 09:11:51 Optimal L0 Data Zone Capacity: 2,081,008 I 09:11:51 Optimal L0 Data Zone Method: Copied From Original Disc I 09:11:51 Filling Buffer... I 09:11:52 Writing LeadIn... I 09:12:34 Writing Image... I 09:12:34 Writing Layer 0... (LBA: 0 - 2081007) I 09:34:05 Writing Layer 1... (LBA: 2081008 - 3794773) I 09:51:50 Synchronising Cache... I 09:51:54 Closing Track... I 09:51:56 Finalising Disc... I 09:56:45 Image MD5: 2551ea3652b50c4cc1ef0a32d6fd67d8 I 09:56:46 Operation Successfully Completed! - Duration: 00:44:53 I 09:56:46 Average Write Rate: 3,222 KB/s (2.3x) - Maximum Write Rate: 3,364 KB/s (2.4x) I 09:56:46 Cycling Tray before Verify... I 09:57:08 Device Ready! I 09:57:10 Operation Started! I 09:57:10 Source Device: [2:0:0] PLEXTOR DVDR PX-755A 1.06 (F:) (ATA) I 09:57:10 Source Media Type: DVD-ROM I 09:57:10 Image File: C:\A.MDS I 09:57:10 Image File Sectors: 3,794,774 (MODE1/2048) I 09:57:10 Image File Size: 7,771,697,152 bytes I 09:57:10 Image File Volume Identifier: A I 09:57:10 Image File Implementation Identifier: A I 09:57:10 Image File File System(s): ISO9660, UDF (1.02) I 09:57:10 Verifying Sectors... W 10:24:43 Failed to read Sector 2058208 - L-EC Uncorrectable Error W 10:24:43 Sector 2058208 maps to File: VIDEO_TS\VTS_01_4.VOB E 10:24:49 Failed to read Sector 2058209 - L-EC Uncorrectable Error E 10:24:49 Sector 2058209 maps to File: VIDEO_TS\VTS_01_4.VOB E 10:24:49 Failed to Verify Sectors! E 10:24:49 Operation Failed! - Duration: 00:27:39 I 10:24:49 Average Verify Rate: 2,481 KB/s (1.8x) - Maximum Verify Rate: 16,541 KB/s (11.9x) 41. tested new Plextor PX-755SA, 2.4, and +R DL. bad burn I 14:44:51 ImgBurn Version 2.1.0.0 started! I 14:44:51 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2) I 14:44:51 Initialising SPTI... I 14:44:51 Searching for SCSI / ATAPI devices... I 14:44:51 Found 1 DVD?RW! I 14:54:25 Operation Started! I 14:54:25 Source File: C:\A.MDS I 14:54:25 Source File Sectors: 3,794,774 (MODE1/2048) I 14:54:25 Source File Size: 7,771,697,152 bytes I 14:54:25 Source File Volume Identifier: A I 14:54:25 Source File Implementation Identifier: A I 14:54:25 Source File File System(s): ISO9660, UDF (1.02) I 14:54:25 Destination Device: [2:0:0] PLEXTOR DVDR PX-755A 1.06 (F:) (ATA) I 14:54:25 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2.4x, 4x, 6x) I 14:54:25 Destination Media Sectors: 4,173,824 I 14:54:25 Write Mode: DVD I 14:54:25 Write Type: DAO I 14:54:25 Write Speed: 2.4x I 14:54:25 Link Size: Auto I 14:54:25 Test Mode: No I 14:54:25 BURN-Proof: Enabled I 14:54:25 Optimal L0 Data Zone Capacity: 2,081,008 I 14:54:25 Optimal L0 Data Zone Method: Copied From Original Disc I 14:54:26 Filling Buffer... I 14:54:26 Writing LeadIn... I 14:55:11 Writing Image... I 14:55:11 Writing Layer 0... (LBA: 0 - 2081007) I 15:16:44 Writing Layer 1... (LBA: 2081008 - 3794773) I 15:34:28 Synchronising Cache... I 15:34:32 Closing Track... I 15:34:34 Finalising Disc... I 15:39:23 Image MD5: 2551ea3652b50c4cc1ef0a32d6fd67d8 I 15:39:25 Operation Successfully Completed! - Duration: 00:44:57 I 15:39:25 Average Write Rate: 3,221 KB/s (2.3x) - Maximum Write Rate: 3,360 KB/s (2.4x) I 15:39:25 Cycling Tray before Verify... I 15:39:46 Device Ready! I 15:39:48 Operation Started! I 15:39:48 Source Device: [2:0:0] PLEXTOR DVDR PX-755A 1.06 (F:) (ATA) I 15:39:48 Source Media Type: DVD-ROM I 15:39:48 Image File: C:\A.MDS I 15:39:48 Image File Sectors: 3,794,774 (MODE1/2048) I 15:39:48 Image File Size: 7,771,697,152 bytes I 15:39:48 Image File Volume Identifier: A I 15:39:48 Image File Implementation Identifier: A I 15:39:48 Image File File System(s): ISO9660, UDF (1.02) I 15:39:48 Verifying Sectors... W 16:39:49 Failed to read Sector 2027408 - L-EC Uncorrectable Error W 16:39:49 Sector 2027408 maps to File: VIDEO_TS\VTS_01_4.VOB E 16:40:02 Failed to read Sector 2027409 - L-EC Uncorrectable Error E 16:40:02 Sector 2027409 maps to File: VIDEO_TS\VTS_01_4.VOB E 16:40:02 Failed to Verify Sectors! E 16:40:02 Operation Failed! - Duration: 01:00:14 I 16:40:02 Average Verify Rate: 1,121 KB/s (0.8x) - Maximum Verify Rate: 14,145 KB/s (10.2x) I am now considering what to replace next. All that is left that seems relevant is an AMD Athlon 64 X2 4400+ or an OCZ GameXstream Power Supply 600W. Here is a list of the other parts that have not been replaced. Floppy drive case + power cord keyboard mouse monitor + power cord speakers

Verbatim 8.5GB Dual Layer DVD+R 2.4X 20 Disc Spindle $32.95 CDN SORRY SALE ENDS TOMORROW http://www.ncix.com/products/index.php?sku...mp;promoid=1022 Futureshop has them on sale about once a month for $30-$35.

29. formatted hard drive, installed motherboard, video adapter, Windows XP SP2 with updates (no IE7), ForceWare Release 90 Version: 93.71 (less ATA), and Imgburn 2.1.0.0. 30. tested new Plextor PX-755SA, 2.4, and +DL. good burn 31. tested new Plextor PX-755SA, 2.4, and +DL. good burn 32. tested new Plextor PX-755SA, 2.4, and +DL. bad burn 33. Moved RAM modules to achive double DDR 34. tested new Plextor PX-755SA, 2.4, and +DL. good burn 35. tested new Plextor PX-755SA, 2.4, and +DL. good burn 36. tested new Plextor PX-755SA, 2.4, and +DL. good burn I have yet to test the PX-716SA and Benq 1640. Things are looking promising.

I purchased a DFI LANPARTY UT NF4 SLI-DR Expert (motherboard) and BFG GeForce 7900 GS OC (PCIe video adapter). See you in a few days when its all put together and running.

I thought about trying to blow compressed air into my old drives but am waiting to confirm that they are bad first. I just bought a brand new Plextor PX-755SA so the lens should be spotless. 25. Installed new SATA cable. 26. tested new Plextor PX-755SA, 2.4, and +DL. bad burn 27. Moved drive to another SATA port. 28. tested new Plextor PX-755SA, 2.4, and +DL. bad burn

I am into my third spindle of Verbatim. I have over a spindle of coasters now. I am out of ideas so I purchased a new Plextor PX-755SA. Upgraded firmware. 21. tested with new Plextor PX-755SA, 2.4, and +DL. good burn 22. tested with new Plextor PX-755SA, 2.4, and +DL. good burn 23. tested new Plextor PX-755SA, 2.4, and +DL. bad burn 24. tested new Plextor PX-755SA, 2.4, and +DL. bad burn I 07:23:21 Operation Started! I 07:23:21 Source File: D:\DVD.MDS I 07:23:21 Source File Sectors: 3,569,707 (MODE1/2048) I 07:23:21 Source File Size: 7,310,759,936 bytes I 07:23:21 Source File Volume Identifier: DVD I 07:23:21 Source File Implementation Identifier: I 07:23:21 Source File File System(s): ISO9660, UDF (1.02) I 07:23:21 Destination Device: [1:0:0] PLEXTOR DVDR PX-755A 1.06 (G:) (ATA) I 07:23:21 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2.4x, 4x, 6x) I 07:23:21 Destination Media Sectors: 4,173,824 I 07:23:21 Write Mode: DVD I 07:23:21 Write Type: DAO I 07:23:21 Write Speed: 2.4x I 07:23:21 Link Size: Auto I 07:23:21 Test Mode: No I 07:23:21 BURN-Proof: Enabled I 07:23:21 Optimal L0 Data Zone Capacity: 2,052,528 I 07:23:21 Optimal L0 Data Zone Method: Copied From Original Disc I 07:23:21 Filling Buffer... I 07:23:22 Writing LeadIn... I 07:49:28 Abort Request Acknowledged imgburn did not cancel, properly. Terminated in Task Manager.

I found a Plextor 760A review from June 06. http://www.pcpro.co.uk/reviews/87359/plextor-px760a.html "...a 6.4x speed translates into 16 minutes to burn 8GB of data, whereas an 8.8x speed burns it in 11 minutes... But it's ultimately eclipsed by the LG GSA-H10N. At ?34, it was easily the fastest drive on show. Single-layer discs burnt at 12.7x for both +R and -R, and dual-layer DVDs at 8.8x and 6x. "

Does a successful verify mean a good quality burn? If so I would like to let you know that I have had great luck burning 100+ Verbatim +DL at 6x on my Plextor 716SA. I do not think I had a single failure (except for the last 2 weeks, where the wheels have fallen off). The graphs and charts say there is nothing special with Plextor any more?

The average consumer usually assumes the latest model is the best? My knowledge of drives is low. The big sales pitch on the 760 is it burns single layer 18x. Of course will it do it on the disc I use? Is that disc in production? If so does it cost an arm and leg? Is it in North America? I hope someone who makes all the graphs in Drives and Media section can give me an educated answer? I hope they read the chat section. When I saw the form titles I thought I would post this question in Drives and Media but after seening the content there, I thought it was better in imgburn support section. Now for some reason its in a section where jokes and Doctor Who postings are the most popular.

I later regretted posting this buying question in this thread. I created a new one thread but some one did not think it was approprate in this group and moved it to Chat. I will continue there....

I have reseated Plextor (SATA) many times. I can try borrowing another cable from a friend to eliminate it as a possibility. The Benq (ATA) is on a flat 80 conductor cable. I also tried a rounded 80 conductor cable too. It is the only drive on the cable and is plugged into the end. The jumper is set to master. The RAID on the motherboard is disabled in BIOS. Ok until I get this problem resolved it will only be 2.4x burns. I followed the FAQ on DMA and uninstalled the controller. I read my comments from an earlier post and see how what I said could be confusing. Is this what you mean to remove the channel? I am using the NVIDIA nForce3 250 Parallel ATA Controller (v2.6) and NVIDIA nForce3 250 Serial ATA Controller (v2.6). Are there compatibility problems with this driver?

I want to purchase a new drive to burn Verbatim +DL the fastest and most accurately. Is there some consensus as to which single drive or group of drives stand out amongst the rest.

they are available and lots of places have them Page Computer ,The Nerds,Comp-U- Plus Direct,Amazon.com just to name a few BTW www.Newegg.com has them they dont list the model but list it as the Plex 18X dvd rw its a 760.they have great service fast delivery I buy all my drives from them Are you confusing the Plextor PX-760SA model with the PX-760A? I am unable to find the Serial ATA version at any of these websites.

I tried to buy a Plextor PX-760SA drive but it appears they are not available in North America. Maybe my 716SA is bad? The Benq has mostly been sitting on the shelf. It is used only to determining if burn problems are hardware or software related. What drive burns the Verbatim +DL the fastest and most accurately? My 716A did 6x 99% of time (until just recently). I can get another one but it seems foolish if the first one died early. There is a 755SA model available too. My preference is for SATA as switching back to an ATA burner would mean I would have to replace my 2 x 200 Gb ATA mirror with 2 new SATA drives.

11. Removed OS HD. Installed new HD and loaded OS. Installed imgburn. 12. tested with Benq, 8x and +DL. bad burn "Session Fixation Error Writing Lead In errors" 13. tested with Benq, 2.4x and +DL. good burn 14. tested with Benq, 2.4x and +DL.. bad burn "Failed to read Sector 18162 - Unrecovered Read Error" 15. tested with Plextor and -R. good burn. 16. tested with Plextor, 6x and +DL. bad burn "Invalid Address For Write" 17. tested with Plextor, 6x and +DL. good burn 18. tested with Plextor, 6x and +DL. bad burn "Failed to read Sector 0 - Unknown (Seek Error)" 19. Installed Nero 20. test with Plextor, 6x, and +DL, bad burn

cornholio7: I tried 2.4x in step 3. I gave it another shot in step 6 too just for good measure. LIGHTNING UK!: Thank you for your time. I hate reading all these cries for help with no happy endings posted so for those like me I will keep you updated on my search for "Operation Successfully Completed!" I tried the following tonight: 5. Verbatim DVD+DL burned ok in another computer so the spindle of discs should not be the problem. 6. Went back to Plextor drive. Uninstalled the serial ata controllers device drivers. another bad burn 7. Switched to -R to save money. Tried using another burning application. another bad burn 8. Uninstalled Realplayer. another bad burn 9. Uninstalled Microsoft Windows XP Video Decoder Checkup Utility, Addbe Download Manager, Adobe Flash Player 9 Active X, and Mouse Suite. sucessful burn. 10 Switched to +DL. another bad burn I rarely see the same error twice. It seems hopeless to try and determine anything out of these error messages. They appear to be the same from many other burning applications too.

---------------------------------------------------- Filter Driver Load Order http://www.bustrace.com ---------------------------------------------------- Upper Device Filter: redbook Device Object: BENQ DVD DD DW1640 Lower Device Filter: imapi Driver Name: redbook.sys File Location: c:\windows\system32\drivers File Description: Redbook Audio Filter Driver File Version: 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158) [5.1.2600.2180] Product Name: Microsoft? Windows? Operating System Product Version: 5.1.2600.2180 [5.1.2600.2180] Company Name: Microsoft Corporation Driver Name: imapi.sys File Location: c:\windows\system32\drivers File Description: IMAPI Kernel Driver File Version: 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158) [5.1.2600.2180] Product Name: Microsoft? Windows? Operating System Product Version: 5.1.2600.2180 [5.1.2600.2180] Company Name: Microsoft Corporation I checked the DMA and it was PIO. I am sure I checked this before making these posts and it was DMA. I removed the device and rebooted to have it reinstalled. I burned another coaster. I tried out the suspend and hibrinate feature for the first time just receiently. I did try AnyDVD once but I believe I reloaded my computer wiping it out. I see no trace of it in Add and Remove Programs. The latest log: I 07:37:49 ImgBurn Version 2.1.0.0 started! I 07:37:49 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2) I 07:37:49 Initialising SPTI... I 07:37:49 Searching for SCSI / ATAPI devices... I 07:37:49 Found 1 DVD?RW! I 07:39:10 Operation Started! I 07:39:10 Source File: E:\DVD.MDS I 07:39:10 Source File Sectors: 3,692,190 (MODE1/2048) I 07:39:10 Source File Size: 7,561,605,120 bytes I 07:39:10 Source File Volume Identifier: DVD I 07:39:10 Source File Implementation Identifier: I 07:39:10 Source File File System(s): ISO9660, UDF (1.02) I 07:39:10 Destination Device: [0:2:0] BENQ DVD DD DW1640 BSRB (F:) (ATA) I 07:39:10 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2.4x, 4x, 8x) I 07:39:10 Destination Media Sectors: 4,173,824 I 07:39:10 Write Mode: DVD I 07:39:10 Write Type: DAO I 07:39:10 Write Speed: 8x I 07:39:10 Link Size: Auto I 07:39:10 Test Mode: No I 07:39:10 BURN-Proof: Enabled I 07:39:10 Optimal L0 Data Zone Capacity: 1,846,096 I 07:39:10 Optimal L0 Data Zone Method: Copied From Original Disc I 07:39:10 Filling Buffer... I 07:39:11 Writing LeadIn... I 07:39:30 Writing Image... I 07:39:30 Writing Layer 0... (LBA: 0 - 1846095) I 07:51:56 Writing Layer 1... (LBA: 1846096 - 3692189) I 08:04:26 Synchronising Cache... I 08:04:27 Closing Track... I 08:04:34 Finalising Disc... I 08:05:59 Image MD5: 9d034d363fe7ade3409668ab62bd0ba3 I 08:06:00 Operation Successfully Completed! - Duration: 00:26:48 I 08:06:00 Average Write Rate: 4,939 KB/s (3.6x) - Maximum Write Rate: 11,132 KB/s (8.0x) I 08:06:00 Cycling Tray before Verify... W 08:06:12 Waiting for device to become ready... I 08:06:26 Device Ready! I 08:06:27 Operation Started! I 08:06:27 Source Device: [0:2:0] BENQ DVD DD DW1640 BSRB (F:) (ATA) I 08:06:27 Source Media Type: DVD+R DL (Book Type: DVD+R DL) (Disc ID: MKM-001-00) (Speeds: 2.4x, 4x, 8x) I 08:06:27 Image File: E:\DVD.MDS I 08:06:27 Image File Sectors: 3,692,190 (MODE1/2048) I 08:06:27 Image File Size: 7,561,605,120 bytes I 08:06:27 Image File Volume Identifier: DVD I 08:06:27 Image File Implementation Identifier: I 08:06:27 Image File File System(s): ISO9660, UDF (1.02) I 08:06:27 Verifying Sectors... W 08:07:49 Failed to read Sector 184608 - Unrecovered Read Error W 08:07:49 Sector 184608 maps to File: VIDEO_TS\VTS_01_1.VOB W 08:07:56 Failed to read Sector 184609 - Unrecovered Read Error W 08:07:56 Sector 184609 maps to File: VIDEO_TS\VTS_01_1.VOB W 08:08:01 Failed to read Sector 184610 - Unrecovered Read Error W 08:08:01 Sector 184610 maps to File: VIDEO_TS\VTS_01_1.VOB W 08:08:06 Failed to read Sector 184611 - Unrecovered Read Error W 08:08:06 Sector 184611 maps to File: VIDEO_TS\VTS_01_1.VOB W 08:08:11 Failed to read Sector 184612 - Unrecovered Read Error W 08:08:11 Sector 184612 maps to File: VIDEO_TS\VTS_01_1.VOB W 08:08:15 Failed to read Sector 184613 - Unrecovered Read Error W 08:08:15 Sector 184613 maps to File: VIDEO_TS\VTS_01_1.VOB W 08:08:20 Failed to read Sector 184614 - Unrecovered Read Error W 08:08:20 Sector 184614 maps to File: VIDEO_TS\VTS_01_1.VOB W 08:08:24 Failed to read Sector 184615 - Unrecovered Read Error W 08:08:24 Sector 184615 maps to File: VIDEO_TS\VTS_01_1.VOB W 08:08:29 Failed to read Sector 184616 - Unrecovered Read Error W 08:08:29 Sector 184616 maps to File: VIDEO_TS\VTS_01_1.VOB W 08:08:33 Failed to read Sector 184617 - Unrecovered Read Error W 08:08:33 Sector 184617 maps to File: VIDEO_TS\VTS_01_1.VOB W 08:08:38 Failed to read Sector 184618 - Unrecovered Read Error W 08:08:38 Sector 184618 maps to File: VIDEO_TS\VTS_01_1.VOB W 08:08:43 Failed to read Sector 184619 - Unrecovered Read Error W 08:08:43 Sector 184619 maps to File: VIDEO_TS\VTS_01_1.VOB W 08:08:52 Failed to read Sector 184620 - Unrecovered Read Error W 08:08:52 Sector 184620 maps to File: VIDEO_TS\VTS_01_1.VOB W 08:08:56 Failed to read Sector 184621 - Unrecovered Read Error W 08:08:56 Sector 184621 maps to File: VIDEO_TS\VTS_01_1.VOB W 08:09:00 Failed to read Sector 184622 - Unrecovered Read Error W 08:09:00 Sector 184622 maps to File: VIDEO_TS\VTS_01_1.VOB W 08:09:05 Failed to read Sector 184623 - Unrecovered Read Error W 08:09:05 Sector 184623 maps to File: VIDEO_TS\VTS_01_1.VOB W 08:09:23 Failed to read Sector 202016 - Unrecovered Read Error W 08:09:23 Sector 202016 maps to File: VIDEO_TS\VTS_01_1.VOB W 08:09:25 Failed to read Sector 202017 - Unrecovered Read Error W 08:09:25 Sector 202017 maps to File: VIDEO_TS\VTS_01_1.VOB W 08:09:43 Failed to read Sector 202018 - Unrecovered Read Error W 08:09:43 Sector 202018 maps to File: VIDEO_TS\VTS_01_1.VOB W 08:09:47 Failed to read Sector 202019 - Unrecovered Read Error W 08:09:47 Sector 202019 maps to File: VIDEO_TS\VTS_01_1.VOB W 08:09:52 Failed to read Sector 202020 - Unrecovered Read Error W 08:09:52 Sector 202020 maps to File: VIDEO_TS\VTS_01_1.VOB E 08:09:58 Failed to read Sector 202021 - Unrecovered Read Error E 08:09:58 Sector 202021 maps to File: VIDEO_TS\VTS_01_1.VOB I pushed the cancel here. E 08:09:58 Failed to Verify Sectors! E 08:09:58 Operation Failed! - Duration: 00:03:30 I 08:09:58 Average Verify Rate: 1,924 KB/s (1.4x) - Maximum Verify Rate: 8,270 KB/s (6.0x)

I use to have high success rate with Verbatim +DL, Plextor 716SA, with old firmware, old version (2.0.0.0) of imgburn. Here are the 4 steps I taken to try to resolve my problems. 1. Started getting these errors? How can this be "Operation Successfully Completed!"? Upgraded firmware and tried second spindle of Verbatim +DL but still producing bad dvds I 18:42:54 ImgBurn Version 2.0.0.0 started! I 18:42:54 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2) I 18:42:54 Initialising SPTI... I 18:42:54 Searching for SCSI / ATAPI devices... I 18:43:24 Found 1 DVD?RW! I 18:43:59 Operation Started! I 18:43:59 Source File: D:\DVD1.MDS I 18:43:59 Source File Sectors: 2,563,491 (MODE1/2048) I 18:43:59 Source File Size: 5,250,029,568 bytes I 18:43:59 Source File Volume Identifier: DVD1 I 18:43:59 Source File Implementation Identifier: I 18:43:59 Source File File System(s): ISO9660, UDF (1.02) I 18:43:59 Destination Device: [2:0:0] PLEXTOR DVDR PX-716A 1.10 (G:) (ATA) I 18:43:59 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2.4x, 4x, 6x) I 18:43:59 Destination Media Sectors: 4,173,824 I 18:43:59 Write Mode: DVD I 18:43:59 Write Type: DAO I 18:43:59 Write Speed: 6x I 18:43:59 Link Size: Auto I 18:43:59 Test Mode: No I 18:43:59 BURN-Proof: Enabled I 18:43:59 Optimal L0 Data Zone Capacity: 1,550,800 I 18:43:59 Optimal L0 Data Zone Method: Copied From Original Disc I 18:43:59 Filling Buffer... I 18:43:59 Writing LeadIn... I 18:45:00 Writing Image... I 18:45:00 Writing Layer 0... (LBA: 0 - 1550799) I 18:51:25 Writing Layer 1... (LBA: 1550800 - 2563490) I 18:55:38 Synchronising Cache... I 18:56:08 Closing Track... I 18:56:10 Finalising Disc... I 18:58:52 Image MD5: 71a6f1ab6b7d85c50b9010ff3461989e I 18:58:54 Operation Successfully Completed! - Duration: 00:14:53 I 18:58:54 Average Write Rate: 8,048 KB/s (5.8x) - Maximum Write Rate: 8,424 KB/s (6.1x) I 18:58:54 Cycling Tray before Verify... I 18:59:33 Device Ready! I 18:59:35 Operation Started! I 18:59:35 Source Device: [2:0:0] PLEXTOR DVDR PX-716A 1.10 (G:) (ATA) I 18:59:35 Source Media Type: DVD+R DL (Book Type: DVD-ROM) (Disc ID: MKM-001-00) (Speeds: 2.4x, 4x, 6x) I 18:59:35 Image File: D:\DVD1.MDS I 18:59:35 Image File Sectors: 2,563,491 (MODE1/2048) I 18:59:35 Image File Size: 5,250,029,568 bytes I 18:59:35 Image File Volume Identifier: DVD1 I 18:59:35 Image File Implementation Identifier: I 18:59:35 Image File File System(s): ISO9660, UDF (1.02) I 18:59:35 Verifying Sectors... W 19:57:40 Miscompare at LBA: 323796, Offset: 7, File: VIDEO_TS\VTS_01_1.VOB W 19:57:40 Device: 0xA2 W 19:57:40 Image File: 0x77 W 19:57:40 Total Errors in Sector: 2,020 I 19:57:40 Verifying Sectors... W 19:57:41 Miscompare at LBA: 323797, Offset: 7, File: VIDEO_TS\VTS_01_1.VOB W 19:57:41 Device: 0xA6 W 19:57:41 Image File: 0x7C W 19:57:41 Total Errors in Sector: 2,014 I 19:57:41 Verifying Sectors... W 19:57:42 Miscompare at LBA: 323798, Offset: 7, File: VIDEO_TS\VTS_01_1.VOB W 19:57:42 Device: 0xAB W 19:57:42 Image File: 0x80 W 19:57:42 Total Errors in Sector: 2,015 I 19:57:42 Verifying Sectors... W 19:57:42 Miscompare at LBA: 323799, Offset: 7, File: VIDEO_TS\VTS_01_1.VOB W 19:57:42 Device: 0xAF W 19:57:42 Image File: 0x85 W 19:57:42 Total Errors in Sector: 2,020 lots of the same removed as too big to post I 20:12:33 Verifying Sectors... I 20:12:51 Device MD5: 4ef1f497dbbb209cfc8b23cb2d67581e I 20:12:51 Image MD5: 71a6f1ab6b7d85c50b9010ff3461989e I 20:12:51 Operation Successfully Completed! - Duration: 01:13:15 I 20:12:51 Average Verify Rate: 1,166 KB/s (0.8x) - Maximum Verify Rate: 9,531 KB/s (6.9x) 2. I have tried a spare second drive (Benq 1640). bad burn and then good burn and then bad burn 3. Upgrading firmware and burning at 2.4 = another bad burn 4. Upgraded imgburn (2.1.0.0) another bad burn Here is a log of my latest failure. I 23:24:01 ImgBurn Version 2.1.0.0 started! I 23:24:01 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2) I 23:24:01 Initialising SPTI... I 23:24:01 Searching for SCSI / ATAPI devices... I 23:24:01 Found 1 DVD?RW! I 23:26:04 Operation Started! I 23:26:04 Source File: E:\DVD.MDS I 23:26:04 Source File Sectors: 3,692,190 (MODE1/2048) I 23:26:04 Source File Size: 7,561,605,120 bytes I 23:26:04 Source File Volume Identifier: DVD I 23:26:04 Source File Implementation Identifier: I 23:26:04 Source File File System(s): ISO9660, UDF (1.02) I 23:26:04 Destination Device: [0:2:0] BENQ DVD DD DW1640 BSRB (F:) (ATA) I 23:26:04 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2.4x, 4x, 8x) I 23:26:04 Destination Media Sectors: 4,173,824 I 23:26:04 Write Mode: DVD I 23:26:04 Write Type: DAO I 23:26:04 Write Speed: 8x I 23:26:04 Link Size: Auto I 23:26:04 Test Mode: No I 23:26:04 BURN-Proof: Enabled I 23:26:05 Optimal L0 Data Zone Capacity: 1,846,096 I 23:26:05 Optimal L0 Data Zone Method: Copied From Original Disc I 23:26:05 Filling Buffer... I 23:26:05 Writing LeadIn... I 23:26:28 Writing Image... I 23:26:28 Writing Layer 0... (LBA: 0 - 1846095) I 23:38:36 Writing Layer 1... (LBA: 1846096 - 3692189) I 23:45:13 Synchronising Cache... I 23:45:14 Closing Track... I 23:45:20 Finalising Disc... I 23:46:03 Image MD5: 9d034d363fe7ade3409668ab62bd0ba3 I 23:46:03 Operation Successfully Completed! - Duration: 00:19:59 I 23:46:03 Average Write Rate: 6,563 KB/s (4.7x) - Maximum Write Rate: 11,185 KB/s (8.1x) I 23:46:03 Cycling Tray before Verify... W 23:46:16 Waiting for device to become ready... I 23:46:31 Device Ready! I 23:46:32 Operation Started! I 23:46:32 Source Device: [0:2:0] BENQ DVD DD DW1640 BSRB (F:) (ATA) I 23:46:32 Source Media Type: DVD+R DL (Book Type: DVD+R DL) (Disc ID: MKM-001-00) (Speeds: 2.4x, 4x, 8x) I 23:46:32 Image File: E:\DVD.MDS I 23:46:32 Image File Sectors: 3,692,190 (MODE1/2048) I 23:46:32 Image File Size: 7,561,605,120 bytes I 23:46:32 Image File Volume Identifier: DVD I 23:46:32 Image File Implementation Identifier: I 23:46:32 Image File File System(s): ISO9660, UDF (1.02) I 23:24:01 ImgBurn Version 2.1.0.0 started! I 23:24:01 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2) I 23:24:01 Initialising SPTI... I 23:24:01 Searching for SCSI / ATAPI devices... I 23:24:01 Found 1 DVD?RW! I 23:26:04 Operation Started! I 23:26:04 Source File: E:\DVD.MDS I 23:26:04 Source File Sectors: 3,692,190 (MODE1/2048) I 23:26:04 Source File Size: 7,561,605,120 bytes I 23:26:04 Source File Volume Identifier: DVD I 23:26:04 Source File Implementation Identifier: MEI I 23:26:04 Source File File System(s): ISO9660, UDF (1.02) I 23:26:04 Destination Device: [0:2:0] BENQ DVD DD DW1640 BSRB (F:) (ATA) I 23:26:04 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2.4x, 4x, 8x) I 23:26:04 Destination Media Sectors: 4,173,824 I 23:26:04 Write Mode: DVD I 23:26:04 Write Type: DAO I 23:26:04 Write Speed: 8x I 23:26:04 Link Size: Auto I 23:26:04 Test Mode: No I 23:26:04 BURN-Proof: Enabled I 23:26:05 Optimal L0 Data Zone Capacity: 1,846,096 I 23:26:05 Optimal L0 Data Zone Method: Copied From Original Disc I 23:26:05 Filling Buffer... I 23:26:05 Writing LeadIn... I 23:26:28 Writing Image... I 23:26:28 Writing Layer 0... (LBA: 0 - 1846095) I 23:38:36 Writing Layer 1... (LBA: 1846096 - 3692189) I 23:45:13 Synchronising Cache... I 23:45:14 Closing Track... I 23:45:20 Finalising Disc... I 23:46:03 Image MD5: 9d034d363fe7ade3409668ab62bd0ba3 I 23:46:03 Operation Successfully Completed! - Duration: 00:19:59 I 23:46:03 Average Write Rate: 6,563 KB/s (4.7x) - Maximum Write Rate: 11,185 KB/s (8.1x) I 23:46:03 Cycling Tray before Verify... W 23:46:16 Waiting for device to become ready... I 23:46:31 Device Ready! I 23:46:32 Operation Started! I 23:46:32 Source Device: [0:2:0] BENQ DVD DD DW1640 BSRB (F:) (ATA) I 23:46:32 Source Media Type: DVD+R DL (Book Type: DVD+R DL) (Disc ID: MKM-001-00) (Speeds: 2.4x, 4x, 8x) I 23:46:32 Image File: E:\DVD.MDS I 23:46:32 Image File Sectors: 3,692,190 (MODE1/2048) I 23:46:32 Image File Size: 7,561,605,120 bytes I 23:46:32 Image File Volume Identifier: DVD I 23:46:32 Image File Implementation Identifier: MEI I 23:46:32 Image File File System(s): ISO9660, UDF (1.02) I 00:29:16 Abort Request Acknowledged waited for 5 minutes and terminated program via task manager I had burn problems this summer and replaced the power supply to resolve. Is there a problem determination guide?