cornholio7

i am using BSRB and BSOB before that, both gave great results with verbatim. i know you mentioned you used build mode to make an iso but did you use build direct to disc?

have you tried building direct to disc from the files? i have burned lots this way and had no coasters as yet , i never did try using pgc edit for dual layer so maybe blutach will be along to help you with that bit

i would delete it anyway just to be sure but it doesn't look like dma with those speeds now, but for the sake of 3 minutes.....

you would look for one that supports bitsetting http://liggydee.cdfreaks.com/page/3550/

your drive doesnt support bitsetting , thats why you are getting the error message. you can get a hacked firmware that will allow bitsetting over at cdfreaks.com

first do you have a link to the website you are talking about? second , check out the FAQ on this forum , post #2 http://forum.imgburn.com/index.php?s=&...dpost&p=967 talks about DMA, this could well be your problem , but a log would help

hop e you fair well through it mate

http://forum.imgburn.com/index.php?showtopic=654 lfcrule1972 tested those discs in the link above -not very impressive at all

i had a 3550 and sold it, wasn't impressed really, meaning i already have a 3500 and it didnt do anything radically different to that one, so i ended up with a pioneer 111

forget the last 4 discs and get some verbatim or taiyo yuden discs , the Ritek discs are very problematic for most take a look at the tests done on them here http://forum.imgburn.com/index.php?showtopic=539

the same disc can have different supported speeds in different drives too PIONEER DVD-RW DVR-111 1.23 (ATA) Supported Write Speeds: 4x; 6x; 8x; 12x Manufacturer ID: TYG02 BENQ DVD DD DW1640 BSRB (ATA) Supported Write Speeds: 2,4x; 4x; 8x Manufacturer ID: TYG02 PLEXTOR DVDR PX-716A 1.09 (ATA) Supported Write Speeds: 4x; 6x; 8x; 12x; 16x Manufacturer ID: TYG02 _NEC DVD_RW ND-3500AG 2.1B (ATA) Supported Write Speeds: 2x; 4x; 6x; 8x; 12x Manufacturer ID: TYG02

you need the files on your hard disc first, imgburn is not a ripping software

try verbatim or taiyo yuden for better results the discs you are using are 3rd class at best http://www.digitalfaq.com/media/dvdmedia.htm

if you are burning from files then there is no .mds. you only need the .mds when burning an .ISO

keep the burn speed to 8x or under and you shouldn't experience any problems, i burn usb hdd to firewire or usb dvd r all the time, no problems at 8x

i have heard a few of their songs wish i was going with you, have a great time mate

http://forum.imgburn.com/index.php?showtop...ess+layer+break i think the most important bit is your player must support it

the burners should be on separate channels too preferably note the times on the next 2 logs, both done simultaneously, no messages about waiting for buffers I 06:25:58 ImgBurn Version 2.0.0.10 Beta started! I 06:25:58 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2) I 06:25:58 Initialising SPTI... I 06:25:58 Searching for SCSI / ATAPI devices... I 06:25:59 Found 4 DVD-ROMs, 3 DVD?RWs and 1 DVD?RW/RAM! I 06:28:58 Operation Started! I 06:28:58 Source File: I:\DVD ISO\xxxx.iso I 06:28:58 Source File Sectors: 2.275.942 (MODE1/2048) I 06:28:58 Source File Size: 4.661.129.216 bytes I 06:28:58 Source File Volume Identifier: xxxx I 06:28:58 Source File Application Identifier: xxxx I 06:28:58 Source File Implementation Identifier: xxxx I 06:28:58 Source File File System(s): ISO9660; UDF (1,02) I 06:28:58 Destination Device: [0:1:0] BENQ DVD DD DW1640 BSRB (E:) (ATA) I 06:28:58 Destination Media Type: DVD-R (Disc ID: TYG02) (Speeds: 2,4x; 4x; 8x) I 06:28:58 Destination Media Sectors: 2.298.496 I 06:28:58 Write Mode: DVD I 06:28:58 Write Type: DAO I 06:28:58 Write Speed: MAX I 06:28:58 Link Size: Auto I 06:28:58 Test Mode: No I 06:28:58 BURN-Proof: Enabled I 06:28:59 Filling Buffer... I 06:28:59 Writing LeadIn... I 06:29:17 Writing Image... I 06:37:00 Synchronising Cache... I 06:37:27 Exporting Graph Data... I 06:37:27 Graph Data File: C:\ibg\BENQ_DVD_DD_DW1640_BSRB_25-AUGUST-2006_06-28_TYG02_MAX.ibg I 06:37:27 Export Successfully Completed! I 06:37:27 Operation Successfully Completed! - Duration: 00:08:28 I 06:37:27 Average Write Rate: 9.852 KB/s (7.1x) - Maximum Write Rate: 11.106 KB/s (8.0x) I 06:37:27 Cycling Tray before Verify... W 06:37:36 Waiting for device to become ready... I 06:37:47 Device Ready! I 06:37:47 Operation Started! I 06:37:47 Source Device: [0:1:0] BENQ DVD DD DW1640 BSRB (E:) (ATA) I 06:37:47 Source Media Type: DVD-R (Book Type: DVD-R) (Disc ID: TYG02) (Speeds: 2,4x; 4x; 8x) I 06:37:47 Image File: I:\DVD ISO\xxxx.iso I 06:37:47 Image File Sectors: 2.275.942 (MODE1/2048) I 06:37:47 Image File Size: 4.661.129.216 bytes I 06:37:47 Image File Volume Identifier: xxxx I 06:37:47 Image File Application Identifier: xxxx I 06:37:47 Image File Implementation Identifier: xxxx I 06:37:47 Image File File System(s): ISO9660; UDF (1,02) I 06:37:47 Verifying Sectors... I 06:43:48 Exporting Graph Data... I 06:43:48 Graph Data File: C:\ibg\BENQ_DVD_DD_DW1640_BSRB_25-AUGUST-2006_06-28_TYG02_MAX.ibg I 06:43:48 Export Successfully Completed! I 06:43:48 Operation Successfully Completed! - Duration: 00:05:55 I 06:43:48 Average Verify Rate: 12.822 KB/s (9.3x) - Maximum Verify Rate: 15.728 KB/s (11.4x) I 06:25:55 ImgBurn Version 2.0.0.10 Beta started! I 06:25:55 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2) I 06:25:55 Initialising SPTI... I 06:25:55 Searching for SCSI / ATAPI devices... I 06:25:55 Found 4 DVD-ROMs, 3 DVD?RWs and 1 DVD?RW/RAM! I 06:28:59 Operation Started! I 06:28:59 Source File: C:\Documents and Settings\xxxx.iso I 06:28:59 Source File Sectors: 2.285.927 (MODE1/2048) I 06:28:59 Source File Size: 4.681.578.496 bytes I 06:28:59 Source File Volume Identifier: xxxx I 06:28:59 Source File Application Identifier: xxxx I 06:28:59 Source File Implementation Identifier: xxxx I 06:28:59 Source File File System(s): ISO9660; UDF (1,02) I 06:28:59 Destination Device: [1:1:0] _NEC DVD_RW ND-3500AG 2.1B (G:) (ATA) I 06:28:59 Destination Media Type: DVD-R (Disc ID: TYG02) (Speeds: 2x; 4x; 6x; 8x; 12x) I 06:28:59 Destination Media Sectors: 2.297.888 I 06:28:59 Write Mode: DVD I 06:28:59 Write Type: DAO I 06:28:59 Write Speed: 8x I 06:28:59 Link Size: Auto I 06:28:59 Test Mode: No I 06:28:59 BURN-Proof: Enabled I 06:28:59 Filling Buffer... I 06:28:59 Writing LeadIn... I 06:29:27 Writing Image... I 06:38:30 Synchronising Cache... I 06:38:36 Exporting Graph Data... I 06:38:36 Graph Data File: C:\ibg\_NEC_DVD_RW_ND-3500AG_2.1B_25-AUGUST-2006_06-28_TYG02_8x.ibg I 06:38:36 Export Successfully Completed! I 06:38:36 Operation Successfully Completed! - Duration: 00:09:37 I 06:38:36 Average Write Rate: 8.435 KB/s (6.1x) - Maximum Write Rate: 11.500 KB/s (8.3x) I 06:38:36 Cycling Tray before Verify... I 06:38:55 Device Ready! I 06:38:56 Operation Started! I 06:38:56 Source Device: [1:1:0] _NEC DVD_RW ND-3500AG 2.1B (G:) (ATA) I 06:38:56 Source Media Type: DVD-R (Book Type: DVD-R) (Disc ID: TYG02) (Speeds: 2x; 4x; 6x; 8x; 12x) I 06:38:56 Image File: C:\Documents and Settings\xxxx.iso I 06:38:56 Image File Sectors: 2.285.927 (MODE1/2048) I 06:38:56 Image File Size: 4.681.578.496 bytes I 06:38:56 Image File Volume Identifier: xxxx I 06:38:56 Image File Application Identifier: xxxx I 06:38:56 Image File Implementation Identifier: xxxx I 06:38:56 Image File File System(s): ISO9660; UDF (1,02) I 06:38:56 Verifying Sectors... I 06:44:28 Exporting Graph Data... I 06:44:28 Graph Data File: C:\ibg\_NEC_DVD_RW_ND-3500AG_2.1B_25-AUGUST-2006_06-28_TYG02_8x.ibg I 06:44:28 Export Successfully Completed! I 06:44:28 Operation Successfully Completed! - Duration: 00:05:28 I 06:44:28 Average Verify Rate: 13.938 KB/s (10.1x) - Maximum Verify Rate: 25.511 KB/s (18.4x)

i think its been deleted mate nice sig btw

http://forum.imgburn.com/index.php?showforum=4 check out the guides section for how to... if you have an iso and mds already just choose the mds they should play on a stand alone dvd player , but if you are using dual layer media then remember to change the booktype to -ROM

http://forum.imgburn.com/index.php?s=&...dpost&p=975 then check this out and check your DMA too also on the same page (post#3)

what speed were you trying to write to the dvd-r ?

you can get verbatim +r dl for ?1.60 in the uk http://svp.co.uk/products-solo.php?pid=1360

you typed a name in both fields?