Jump to content

NLight95

Members
  • Posts

    5
  • Joined

  • Last visited

NLight95's Achievements

ISF Newbie

ISF Newbie (1/5)

  1. From this same spool I had no problems burning at 6x with my Pioneer 112D and 4x with the BenQ 1650. I just tried the Samsung again with Nero and you guys are right: The max burn speed for the MKM 001s is 4x with the SH-203B. I'm not sure how ImgBurn sets the max burn speed but I think in my case is was relying on the info sent to it via PgcEdit, which was 8x. While the Pioneer is capable of burning 8x with the 001s, I'd never burn at that speed because I think it's pushing the media too far. I burn at 6x all the time with no problems. I think where some of my confusion set in was that I was confusing the MKM 001s with the 003s. Both the 112D & SH-203B can burn MKM 003 @10x. But at a net cost of $4/disc, the 003s are just too expensive for me. So now I'm going to either return the Samsung to Newegg or perhaps give it to my friend. I just have to make sure there are no issues with her DFI ICFX3200.
  2. Even after restoring from a backup and removing Alc120, I still get the error (as I mentioned previously it's reproducible). The error seems to have occurred right at the layer break (51% in ImgBurn). My BenQ 1650 has no such problems with PgcEdit/ImgBurn. This is the first error received: I hit Retry, the disc spun but I got the same error, so I hit Cancel. After canceling I received this error: Again, I tried hit Retry but got the same error again. After hitting Cancel the disc took a while to finalize and finally ejected the disc (I have my options set up to eject after a complete write). Here's what the DL disc looks like after being read by ImgBurn now: TSSTcorp CDDVDW SH-S203B SB01 (ATA) Current Profile: DVD+R DL Disc Information: Status: Empty Erasable: No Free Sectors: 4,088,960 Free Space: 8,374,190,080 bytes Free Time: 908:41:35 (MM:SS:FF) Supported Write Speeds: 2.4x, 4x DVD±R DL Boundary Information: L0 Data Zone Capacity: 2,044,480 Changeable: No Physical Format Information (ADIP): Disc ID: MKM-001-00 Book Type: DVD+R DL Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 16,580,607 Last Physical Sector in Layer 0: 2,283,519 Physical Format Information (Last Recorded): Disc ID: MKM-001-00 Book Type: DVD+R DL Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 16,580,607 Last Physical Sector in Layer 0: 2,283,519 And finally, here's my log file: ; //****************************************\\ ; ImgBurn Version 2.3.2.0 - Log ; Sunday, 28 October 2007, 00:42:25 ; \\****************************************// ; ; I 00:19:26 ImgBurn Version 2.3.2.0 started! I 00:19:26 Microsoft Windows Vista Ultimate Edition (6.0, Build 6000) I 00:19:26 Total Physical Memory: 3,143,552 KB - Available: 2,071,784 KB I 00:19:26 Initialising SPTI... I 00:19:26 Searching for SCSI / ATAPI devices... I 00:19:26 Found 1 DVD±RW and 1 DVD±RW/RAM! I 00:19:32 Operation Started! I 00:19:32 Source File: G:\THE_SIXTH_SENSE.ISO I 00:19:32 Source File Sectors: 3,988,553 (MODE1/2048) I 00:19:32 Source File Size: 8,168,556,544 bytes I 00:19:32 Source File Volume Identifier: THE_SIXTH_SENSE I 00:19:32 Source File Application Identifier: MKISOFS ISO 9660/HFS FILESYSTEM BUILDER & CDRECORD CD-R/DVD CREATOR © 1993 E.YOUNGDALE © 1997 J.PEARSON/J.SCHILLING I 00:19:32 Source File Implementation Identifier: mkisofs I 00:19:32 Source File File System(s): ISO9660, UDF (1.02) I 00:19:32 Destination Device: [5:0:0] TSSTcorp CDDVDW SH-S203B SB01 (S:) (ATA) I 00:19:32 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2.4x, 4x) I 00:19:32 Destination Media Sectors: 4,173,824 I 00:19:32 Write Mode: DVD I 00:19:32 Write Type: DAO I 00:19:32 Write Speed: 8x I 00:19:32 Link Size: Auto I 00:19:32 Test Mode: No I 00:19:32 BURN-Proof: Enabled I 00:19:32 User Specified L0 Data Zone Capacity: 2,044,480 I 00:20:17 Filling Buffer... (40 MB) I 00:20:20 Writing LeadIn... I 00:20:31 Writing Image... (LBA: 0 - 3988552) I 00:20:31 Writing Layer 0... (LBA: 0 - 2044479) I 00:33:11 Writing Layer 1... (LBA: 2044480 - 3988552) W 00:33:44 Failed to Write Sectors 2045088 - 2045119 - Write Error W 00:33:44 Retrying (1 of 20)... W 00:33:44 Retry Failed - Invalid Address For Write W 00:33:44 Retrying (2 of 20)... W 00:33:44 Retry Failed - Invalid Address For Write W 00:33:44 Retrying (3 of 20)... W 00:33:44 Retry Failed - Invalid Address For Write W 00:33:44 Retrying (4 of 20)... W 00:33:44 Retry Failed - Invalid Address For Write W 00:33:44 Retrying (5 of 20)... W 00:33:44 Retry Failed - Invalid Address For Write W 00:33:44 Retrying (6 of 20)... W 00:33:44 Retry Failed - Invalid Address For Write W 00:33:44 Retrying (7 of 20)... W 00:33:44 Retry Failed - Invalid Address For Write W 00:33:44 Retrying (8 of 20)... W 00:33:44 Retry Failed - Invalid Address For Write W 00:33:44 Retrying (9 of 20)... W 00:33:44 Retry Failed - Invalid Address For Write W 00:33:44 Retrying (10 of 20)... W 00:33:44 Retry Failed - Invalid Address For Write W 00:33:44 Retrying (11 of 20)... W 00:33:44 Retry Failed - Invalid Address For Write W 00:33:44 Retrying (12 of 20)... W 00:33:44 Retry Failed - Invalid Address For Write W 00:33:44 Retrying (13 of 20)... W 00:33:44 Retry Failed - Invalid Address For Write W 00:33:44 Retrying (14 of 20)... W 00:33:44 Retry Failed - Invalid Address For Write W 00:33:44 Retrying (15 of 20)... W 00:33:44 Retry Failed - Invalid Address For Write W 00:33:44 Retrying (16 of 20)... W 00:33:44 Retry Failed - Invalid Address For Write W 00:33:44 Retrying (17 of 20)... W 00:33:44 Retry Failed - Invalid Address For Write W 00:33:44 Retrying (18 of 20)... W 00:33:44 Retry Failed - Invalid Address For Write W 00:33:44 Retrying (19 of 20)... W 00:33:44 Retry Failed - Invalid Address For Write W 00:33:44 Retrying (20 of 20)... W 00:33:44 Retry Failed - Invalid Address For Write W 00:34:37 Retrying (21)... W 00:34:37 Retry Failed - Invalid Address For Write W 00:34:52 Retrying (22)... W 00:34:52 Retry Failed - Invalid Address For Write W 00:34:53 Retrying (23)... W 00:34:53 Retry Failed - Invalid Address For Write W 00:34:54 Retrying (24)... W 00:34:54 Retry Failed - Invalid Address For Write W 00:34:54 Retrying (25)... W 00:34:54 Retry Failed - Invalid Address For Write W 00:34:54 Retrying (26)... W 00:34:54 Retry Failed - Invalid Address For Write E 00:34:56 Failed to Write Sectors 2045088 - 2045119 - Write Error I 00:34:56 Synchronising Cache... I 00:34:57 Closing Track... I 00:35:13 Finalising Disc... W 00:36:26 Potential 'WaitImmediateIO' Deferred Error - (0/2) - Session Fixation Error Writing Lead Out W 00:38:06 Potential 'WaitImmediateIO' Deferred Error - (0/2) - Session Fixation Error Writing Lead Out E 00:38:10 Finalise Disc Failed! - Reason: Session Fixation Error Writing Lead Out I 00:38:10 Finalising Disc (Last Attempt!)... E 00:40:13 Finalise Disc Failed! - Reason: Session Fixation Error Writing Lead Out E 00:40:13 Failed to Write Image! E 00:40:17 Operation Failed! - Duration: 00:20:40 I 00:40:17 Average Write Rate: 4,728 KB/s (3.4x) - Maximum Write Rate: 5,573 KB/s (4.0x) I 00:42:25 Close Request Acknowledged I 00:42:25 Closing Down... I 00:42:25 Shutting down SPTI... I 00:42:25 ImgBurn closed!
  3. You're correct--I didn't printscreen the initial error. The one posted above was done on a subsequent burn (the error is reproducible) but I had ejected the tray before the burn started to avoid another coaster. Unfortunately I no longer have the original log file because I restored from a previous backup. I have no problems burning with Nero 8 but I'd rather use ImgBurn because I have more control over where I can place the layer break. Are there any conflicts between Alcohol 120%/Nero 8/K-Lite Mega Codec Pack and Imgburn? (I don't use nor have I ever installed Daemon Tools or PowerISO). Here's my system: Lian Li PC-G70B FSP Epsilon 600W Abit IP35 Pro, 09/06/07 BIOS C2D E6600, Tuniq Tower 120 4x1GB Crucial Ballistix Tracers PC8500 BFG 8800GTS 640MB OC Raptor 150GB, Seagate 320GB(2) & 500GB 7200.10 Samsung SATA SH-203B burner, SB01 firmware SB X-Fi XtremeGamer Fatal1ty Pro Vista Ultimate (32-bit)
  4. Here ya go... TSSTcorp CDDVDW SH-S203B SB01 (ATA) Current Profile: DVD+R DL Disc Information: Status: Complete Erasable: No Sessions: 1 Sectors: 32 Size: 65,536 bytes Time: 00:02:32 (MM:SS:FF) Supported Write Speeds: 2.4x, 4x DVD±R DL Boundary Information: L0 Data Zone Capacity: 2,086,912 Changeable: Yes TOC Information: Session 1... -> Track 01 (Mode 1, LBA: 0 - 31) -> LeadOut (LBA: 32) Physical Format Information (ADIP): Disc ID: MKM-001-00 Book Type: DVD+R DL Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 16,580,607 Last Physical Sector in Layer 0: 2,283,519 Physical Format Information (Last Recorded): Disc ID: MKM-001-00 Book Type: DVD-ROM Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 196,639 Last Physical Sector in Layer 0: 458,751 Layer Information: Layer 0 Sectors: 262,144 (8.192E05%) Layer 1 Sectors: 4,294,705,184 (-8.191E05%)
  5. I received the following I/O error when trying to burn an ISO generated by PgcEdit to a Verb DVD+R DL disc. Please note that the error was NOT due to me ejecting the tray. I ejected it because of the error. Normally I never do this but after already having burned one DL coaster I wasn't about to repeat the same costly mistake again. Here's my log file of the operation ; //****************************************\\ ; ImgBurn Version 2.3.2.0 - Log ; Friday, 26 October 2007, 12:26:46 ; \\****************************************// ; ; I 12:26:07 ImgBurn Version 2.3.2.0 started! I 12:26:07 Microsoft Windows Vista Ultimate Edition (6.0, Build 6000) I 12:26:07 Total Physical Memory: 3,143,552 KB - Available: 2,295,052 KB I 12:26:07 Initialising SPTI... I 12:26:07 Searching for SCSI / ATAPI devices... I 12:26:07 Found 1 DVD±RW and 1 DVD±RW/RAM! I 12:26:07 Operation Started! I 12:26:07 Source File: G:\GIMME_SHELTER.ISO I 12:26:07 Source File Sectors: 3,667,683 (MODE1/2048) I 12:26:07 Source File Size: 7,511,414,784 bytes I 12:26:07 Source File Volume Identifier: GIMME_SHELTER I 12:26:07 Source File Application Identifier: MKISOFS ISO 9660/HFS FILESYSTEM BUILDER & CDRECORD CD-R/DVD CREATOR © 1993 E.YOUNGDALE © 1997 J.PEARSON/J.SCHILLING I 12:26:07 Source File Implementation Identifier: mkisofs I 12:26:07 Source File File System(s): ISO9660, UDF (1.02) I 12:26:07 Destination Device: [5:0:0] TSSTcorp CDDVDW SH-S203B SB01 (S:) (ATA) I 12:26:07 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2.4x, 4x) I 12:26:07 Destination Media Sectors: 4,173,824 I 12:26:07 Write Mode: DVD I 12:26:07 Write Type: DAO I 12:26:07 Write Speed: 8x I 12:26:07 Link Size: Auto I 12:26:07 Test Mode: No I 12:26:07 BURN-Proof: Enabled E 12:26:42 User specified layer break position exceeds L0 capacity. E 12:26:44 Operation Failed! - Duration: 00:00:34 I 12:26:44 Average Write Rate: N/A - Maximum Write Rate: N/A I 12:26:46 Close Request Acknowledged I 12:26:46 Closing Down... I 12:26:46 Shutting down SPTI... I 12:26:46 ImgBurn closed!
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.