Jump to content

wanghiking

Members
  • Posts

    7
  • Joined

  • Last visited

wanghiking's Achievements

ISF Newbie

ISF Newbie (1/5)

  1. you guys might be right. I tried another 5 discs, one of them can write lead-in, but when it's 50%, it failed. I already put order of Verbatims DLs...hope it works. Thank you.
  2. Is there a possibility that a drive can burn CD DVD, but DVD DL burning mal-function? I would also like to know that it's just the media's problem rather than the hardware problem, as the burner never gave me problem before. And I love ImgBurn.
  3. Yes, seriously, over a year, Ritek works fine for me. I am just afraid that the burner might have some problem...judging from the log, is it appearing to having some problem? But I tested with CDR and DVD-R, both OK.
  4. Yes, the firmware is a possible solution, but it's not working. Wasted another disc. Just all of a sudden. Can no longer burn DVD DL
  5. thank you for your kind reply. But for the media itself, I had been using this kinda DL discs for almost a year, never brings me any problem. Only recently I reinstalled my XP.
  6. The log as follows: I 05:52:30 Found 1 DVD-ROM/CD-RW and 1 DVD±RW! I 05:52:53 Operation Started! I 05:52:53 Source File: F:\Mass_Effect_USA_XBOX360-PROTOCOL\ptc-me.dvd I 05:52:53 Source File Sectors: 3,825,924 (MODE1/2048) I 05:52:53 Source File Size: 7,835,492,352 bytes I 05:52:53 Source File Volume Identifier: XGD2DVD_NTSC I 05:52:53 Source File Implementation Identifier: Sonic Scenarist 3.1 I 05:52:53 Source File File System(s): ISO9660, UDF (1.02) I 05:52:53 Destination Device: [0:0:0] BENQ DVD DD EW162I 47N9 (K:) (USB) I 05:52:53 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66) (Speeds: 2.4x) I 05:52:53 Destination Media Sectors: 4,173,824 I 05:52:53 Write Mode: DVD I 05:52:53 Write Type: DAO I 05:52:53 Write Speed: MAX I 05:52:53 Link Size: Auto I 05:52:53 Test Mode: No I 05:52:53 BURN-Proof: Enabled I 05:52:53 Optimal L0 Data Zone Capacity: 1,913,760 I 05:52:53 Optimal L0 Data Zone Method: Copied From Original Disc I 05:52:54 Filling Buffer... (40 MB) I 05:52:56 Writing LeadIn... W 05:53:10 Failed to Write Sectors 0 - 31 - Session Fixation Error Writing Lead In W 05:53:10 Retrying (1 of 20)... W 05:57:42 Retry Failed - Power Calibration Area Is Full E 05:57:55 Failed to Write Sectors 0 - 31 - Session Fixation Error Writing Lead In I 05:57:55 Synchronising Cache... I 05:57:56 Closing Track... I 05:57:57 Finalising Disc... E 05:57:59 Finalise Disc Failed! - Reason: Invalid Field in CDB I 05:57:59 Finalising Disc (Last Attempt!)... E 05:57:59 Finalise Disc Failed! - Reason: Invalid Field in CDB E 05:57:59 Failed to Write Image! E 05:57:59 Operation Failed! - Duration: 00:05:05 I 05:57:59 Average Write Rate: N/A - Maximum Write Rate: N/A I 05:58:10 Close Request Acknowledged I 05:58:10 Closing Down... I 05:58:10 Shutting down SPTI... I 05:58:10 ImgBurn closed!
  7. I have a Benq dual layer DVD burner, and I use the newest edition of Imgburn to burn XBOX360's D9 rom. But starting from yesterday, I already wasted 10 dual layer blank disks, as each time I was using Imgburn, in writing lead in, always failed as "Session Fixation Error Writing Lead In", no disk can be burned any more. While if I use the same burner for D5 or CD, it's working. I need to indenty where the problem is. Whether it's my system problem? Software problem or my Dvd burner problem? Can anyone give me a hand? Thank you.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.