Jump to content

IMGBURN doesn't burn on DL


Guyer

Recommended Posts

why it happens ?

 

I have this log

 

I 23:29:20 ImgBurn Version 2.4.4.0 started!

I 23:29:20 Microsoft Windows Vista Home Premium Edition (6.0, Build 6001 : Service Pack 1)

I 23:29:20 Total Physical Memory: 3,143,164 KB - Available: 965,448 KB

I 23:29:36 Initialising SPTI...

I 23:29:36 Searching for SCSI / ATAPI devices...

I 23:29:36 Found 1 DVD

Link to comment
Share on other sites

Put that burnt disc in another drive. It could just be that yours is a bit shite and won't initialise the disc properly, hence why the verify never starts.

 

What does the drive say if you switch to read mode and look in the disc info box on the right? Copy + paste it all please.

Link to comment
Share on other sites

Then go to a friend's place and see if his drive will read it.

 

Follow LUK!'s instructions. Mode --> Read and copy and paste the stuff iun the top right panel (all of it).

 

Regards

Link to comment
Share on other sites

Because your drive isn't recognising the disc properly.

 

Can you please copy the disc information from the window on the right when you're in 'Read' mode on your computer.

 

Then repeat that process on someone else's PC so we can see what their drive thinks about the disc and compare it to yours.

Link to comment
Share on other sites

the idea to install imgburn on another computer that has a dvd drive

is to prove if the problem is with the drive on YOUR computer.

Also make sure that you use good disks, Verbatim or TY, a lot of cheap

disks will not be written to or read by some drives

Link to comment
Share on other sites

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.