Grave Doren'kal Posted June 15, 2009 Share Posted June 15, 2009 (edited) I'm past the rootkits on my drives, I had one successful burn with Gran Torino, after that I did Tales of the Past 3, but it seemed to cut off an inch on the movie, then I did Jurassic park for my sister and the entire screen is pushed down so I only get half the picture. Could this be a new rootkit? Also for some reason after the first successful burn the Drive seems to stop after Buffering, then I press eject and it starts going again, and then every time I open it the tray spits out with the DvD spinning on it Edited June 15, 2009 by Grave Doren'kal Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted June 15, 2009 Share Posted June 15, 2009 No, this sounds like an issue with your source files (and any conversion you might be doing). If it burns and verifies ok, you need to look elsewhere for the cause of the problem. Link to comment Share on other sites More sharing options...
mmalves Posted June 15, 2009 Share Posted June 15, 2009 Also look for the latest firmware for your burner (right-click the drive in ImgBurn and you'll see the option ). Link to comment Share on other sites More sharing options...
Grave Doren'kal Posted June 16, 2009 Author Share Posted June 16, 2009 Well, I was hasty with the first post, it turns out the DvD is fine, it works on the 2 smaller players in my room and another room, but it won't work on the bigger main TV Link to comment Share on other sites More sharing options...
eSkRo Posted June 16, 2009 Share Posted June 16, 2009 Well, I was hasty with the first post, it turns out the DvD is fine, it works on the 2 smaller players in my room and another room, but it won't work on the bigger main TV which app u use to convert to DVD ? Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted June 16, 2009 Share Posted June 16, 2009 Some weird NTSC / PAL issue perhaps? Link to comment Share on other sites More sharing options...
Grave Doren'kal Posted June 17, 2009 Author Share Posted June 17, 2009 I use Avi2DvD, which recommended on their guide to use Imgburn but like I said, the first dvd worked, after that, every other dvd doesn't work on that dvd player Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted June 17, 2009 Share Posted June 17, 2009 You should give a different conversion program a go. Perhaps try DVD Flick or ConvertXtoDVD and make sure you tell it to output files in either NTSC or PAL format - whichever applies to where you live. Link to comment Share on other sites More sharing options...
Grave Doren'kal Posted June 19, 2009 Author Share Posted June 19, 2009 (edited) that raises a very important question that may sound dumb, whats the signifigance of ntsc to pal and vise-versa Edited June 19, 2009 by Grave Doren'kal Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted June 19, 2009 Share Posted June 19, 2009 Some players/tvs won't play both or weird things can happen when they try. Link to comment Share on other sites More sharing options...
dontasciime Posted June 19, 2009 Share Posted June 19, 2009 Pal V's Ntsc Link to comment Share on other sites More sharing options...
Recommended Posts