Jump to content

layer break and end of user area error...


absolom

Recommended Posts

already made 2 coasters, trying to burn this dvd and keep getting this error

 

i've tried to change booktype, but it won't let me...

 

 

 

I 20:54:32 ImgBurn Version 2.5.0.0 started!

I 20:54:32 Microsoft Windows 7 Professional Edition (6.1, Build 7600)

I 20:54:32 Total Physical Memory: 3,669,476 KB - Available: 2,899,324 KB

I 20:54:32 Initialising SPTI...

I 20:54:32 Searching for SCSI / ATAPI devices...

I 20:54:33 Found 1 DVD±RW and 1 DVD±RW/RAM!

I 20:56:59 Operation Started!

I 20:56:59 Source File: H:\downloads from usenet\Mass Effect 2 (2010) (2 DVD)\rzr-me2a.iso

I 20:56:59 Source File Sectors: 3,835,968 (MODE1/2048)

I 20:56:59 Source File Size: 7,856,062,464 bytes

I 20:56:59 Source File Volume Identifier: MassEffect2

I 20:56:59 Source File Volume Set Identifier: 4B5780024B577FE3

I 20:56:59 Source File File System(s): UDF (1.02)

I 20:56:59 Destination Device: [0:1:0] Memorex DVD16+/-DL4RWlD2 JWS5 (E:) (ATA)

I 20:56:59 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2.4x, 4x)

I 20:56:59 Destination Media Sectors: 4,173,824

I 20:56:59 Write Mode: DVD

I 20:56:59 Write Type: DAO

I 20:56:59 Write Speed: 2x

I 20:56:59 Link Size: Auto

I 20:57:00 Lock Volume: Yes

I 20:57:00 Test Mode: No

I 20:57:00 OPC: No

I 20:57:00 BURN-Proof: Enabled

W 20:57:00 Write Speed Miscompare! - Wanted: 2,770 KB/s (2x), Got: 5,540 KB/s (4x)

W 20:57:14 User specified layer break position is such that L0 < L1.

W 20:57:14 Image Size: 3,835,968

W 20:57:14 User Specified L0 Sectors: 1,913,760

W 20:57:14 Calculated L1 Sectors: 1,922,208

I 20:57:14 User Specified L0 Data Zone Capacity: 1,913,760

I 20:57:55 Set L0 Data Zone Capacity Succeeded!

I 20:57:55 Filling Buffer... (40 MB)

I 20:57:55 Writing LeadIn...

I 20:57:57 Writing Session 1 of 1... (1 Track, LBA: 0 - 3835967)

I 20:57:57 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3835967)

I 20:57:57 Writing Layer 0... (LBA: 0 - 1913759)

I 21:17:21 Writing Layer 1... (LBA: 1913760 - 3835967)

W 21:36:45 Failed to Write Sectors 3827520 - 3827551 - Reason: End of User Area Encountered on This Track

W 21:36:45 Retrying (1 of 20)...

W 21:36:45 Retry Failed - Reason: Logical Block Address out of Range

W 21:36:45 Retrying (2 of 20)...

W 21:36:45 Retry Failed - Reason: Logical Block Address out of Range

W 21:36:45 Retrying (3 of 20)...

W 21:36:45 Retry Failed - Reason: Logical Block Address out of Range

W 21:36:45 Retrying (4 of 20)...

W 21:36:45 Retry Failed - Reason: Logical Block Address out of Range

W 21:36:45 Retrying (5 of 20)...

W 21:36:45 Retry Failed - Reason: Logical Block Address out of Range

W 21:36:45 Retrying (6 of 20)...

W 21:36:45 Retry Failed - Reason: Logical Block Address out of Range

W 21:36:45 Retrying (7 of 20)...

W 21:36:45 Retry Failed - Reason: Logical Block Address out of Range

W 21:36:45 Retrying (8 of 20)...

W 21:36:45 Retry Failed - Reason: Logical Block Address out of Range

W 21:36:45 Retrying (9 of 20)...

W 21:36:45 Retry Failed - Reason: Logical Block Address out of Range

W 21:36:45 Retrying (10 of 20)...

W 21:36:45 Retry Failed - Reason: Logical Block Address out of Range

W 21:36:45 Retrying (11 of 20)...

W 21:36:45 Retry Failed - Reason: Logical Block Address out of Range

W 21:36:45 Retrying (12 of 20)...

W 21:36:45 Retry Failed - Reason: Logical Block Address out of Range

W 21:36:45 Retrying (13 of 20)...

W 21:36:45 Retry Failed - Reason: Logical Block Address out of Range

W 21:36:45 Retrying (14 of 20)...

W 21:36:45 Retry Failed - Reason: Logical Block Address out of Range

W 21:36:45 Retrying (15 of 20)...

W 21:36:45 Retry Failed - Reason: Logical Block Address out of Range

W 21:36:45 Retrying (16 of 20)...

W 21:36:45 Retry Failed - Reason: Logical Block Address out of Range

W 21:36:45 Retrying (17 of 20)...

W 21:36:45 Retry Failed - Reason: Logical Block Address out of Range

W 21:36:45 Retrying (18 of 20)...

W 21:36:45 Retry Failed - Reason: Logical Block Address out of Range

W 21:36:45 Retrying (19 of 20)...

W 21:36:45 Retry Failed - Reason: Logical Block Address out of Range

W 21:36:45 Retrying (20 of 20)...

W 21:36:45 Retry Failed - Reason: Logical Block Address out of Range

W 21:49:01 Retrying (21)...

W 21:49:01 Retry Failed - Reason: Logical Block Address out of Range

W 21:49:02 Retrying (22)...

W 21:49:02 Retry Failed - Reason: Logical Block Address out of Range

W 21:49:02 Retrying (23)...

W 21:49:02 Retry Failed - Reason: Logical Block Address out of Range

W 21:49:03 Retrying (24)...

W 21:49:03 Retry Failed - Reason: Logical Block Address out of Range

W 21:49:03 Retrying (25)...

W 21:49:03 Retry Failed - Reason: Logical Block Address out of Range

E 21:49:05 Failed to Write Sectors 3827520 - 3827551 - Reason: End of User Area Encountered on This Track

I 21:49:05 Synchronising Cache...

I 21:49:08 Closing Track...

I 21:49:12 Finalising Disc...

E 21:50:07 Failed to Write Image!

I 21:50:07 Exporting Graph Data...

I 21:50:07 Graph Data File: C:\Users\absolom\AppData\Roaming\ImgBurn\Graph Data Files\Memorex_DVD16+--DL4RWlD2_JWS5_MONDAY-MARCH-01-2010_8-56_PM_MKM-001-00_2x.ibg

I 21:50:07 Export Successfully Completed!

E 21:50:07 Operation Failed! - Duration: 00:53:07

I 21:50:07 Average Write Rate: 2,495 KB/s (1.8x) - Maximum Write Rate: 3,416 KB/s (2.5x)

 

 

 

 

 

 

 

 

 

this is from the other info panel

 

 

Memorex DVD16+/-DL4RWlD2 JWS5 (ATA)

Current Profile: DVD+R DL

 

Disc Information:

Status: Complete

Erasable: No

Sessions: 1

Sectors: 3,827,520

Size: 7,838,760,960 bytes

Time: 850:35:45 (MM:SS:FF)

Supported Write Speeds: 2.4x, 4x

 

DVD±R DL Boundary Information:

L0 Data Zone Capacity: 1,913,760

Changeable: No

 

TOC Information:

Session 1... (LBA: 0)

-> Track 01 (Mode 1, LBA: 0 - 3827519)

-> LeadOut (LBA: 3827520)

 

Disc Control Blocks Information:

SONY DW-D26AJWS5

 

Physical Format Information (ADIP):

Disc ID: MKM-001-00

Book Type: DVD+R DL

Part Version: 1

Disc Size: 120mm

Maximum Read Rate: Not Specified

Number of Layers: 2

Track Path: Opposite Track Path (OTP)

Linear Density: 0.293 um/bit

Track Density: 0.74 um/track

First Physical Sector of Data Area: 196,608

Last Physical Sector of Data Area: 16,580,607

Last Physical Sector in Layer 0: 2,283,519

 

Physical Format Information (Last Recorded):

Disc ID: MKM-001-00

Book Type: DVD-ROM

Part Version: 1

Disc Size: 120mm

Maximum Read Rate: Not Specified

Number of Layers: 2

Track Path: Opposite Track Path (OTP)

Linear Density: 0.293 um/bit

Track Density: 0.74 um/track

First Physical Sector of Data Area: 196,608

Last Physical Sector of Data Area: 16,580,607

Last Physical Sector in Layer 0: 2,110,367

 

Layer Information:

Layer 0 Sectors: 1,913,760 (50%)

Layer 1 Sectors: 1,913,760 (50%)

 

Performance (Write Speed):

Descriptor 1...

-> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00

-> EL: 3827519 (0x003A673F)

-> RS: 11,634 KB/s (8.6x) - WS: 3,324 KB/s (2.4x)

Descriptor 2...

-> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00

-> EL: 3827519 (0x003A673F)

-> RS: 11,634 KB/s (8.6x) - WS: 5,540 KB/s (4x)

Link to comment
Share on other sites

I 20:57:14 User Specified L0 Data Zone Capacity: 1,913,760

Change the layerbreak back to Calculate Optimal in the program's settings and don't mess with it anymore. When you're burning X360 images load the .dvd file and it'll tell ImgBurn the correct layerbreak for that.

Link to comment
Share on other sites

I 20:57:14 User Specified L0 Data Zone Capacity: 1,913,760

Change the layerbreak back to Calculate Optimal in the program's settings and don't mess with it anymore. When you're burning X360 images load the .dvd file and it'll tell ImgBurn the correct layerbreak for that.

 

so if all i have is an .iso, what do i use to create the .dvd file?

Link to comment
Share on other sites

I 20:57:14 User Specified L0 Data Zone Capacity: 1,913,760

Change the layerbreak back to Calculate Optimal in the program's settings and don't mess with it anymore. When you're burning X360 images load the .dvd file and it'll tell ImgBurn the correct layerbreak for that.

 

so if all i have is an .iso, what do i use to create the .dvd file?

 

wow,i might just be retarded

 

i think that i was trying to burn a pc game iso which is why the manual layer break setting wasn't working lol

Link to comment
Share on other sites

You can create a .dvd file with the conveniently named Create DVD File option in ImgBurn's Tools menu ;)

 

technically, i should just be able to manually put in the layer break though, right?

 

i've burnt several images before just by selecting the iso and manually setting the break and everything has worked fine

Link to comment
Share on other sites

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.