paulusss Posted March 31, 2010 Share Posted March 31, 2010 Hi all, I just attached my SONY DVD RW DRU-800A KY06 (E:) (ATA), but getting only faillures right at the beginning of the burn process(using Verbatim +R DL 8x). I updated my firmware and my bios sees the Sony DRU burner as IDE.. This is the error message from imgburn: ImgBurn --------------------------- I/O Error! Device: [1:0:0] SONY DVD RW DRU-800A KY06 (E:) (ATA) ScsiStatus: 0x02 Interpretation: Check Condition CDB: 2A 00 00 00 31 00 00 00 20 00 Interpretation: Write (10) - Sectors: 12544 - 12575 Sense Area: 70 00 05 00 00 00 00 0A 00 00 00 00 21 02 00 00 00 00 Interpretation: Invalid Address For Write --------------------------- Retry Cancel ---------- It seems that the burn-speed doesnt even get to 2.4x speed.. it goes till somewhere between 1.2 - 1.5x and then it stoppes and i get this errorpopup. Plss help me out, i toasted 5 DL's already. If this keeps up, i am broke be4 tomorrow Thanks in advance!! ps. i use 'Sectors in L0' user specified nr: 1913760 ps2. dont know if it contains any usefull info, but to be sure i'll attach the following: ------------ SONY DVD RW DRU-800A KY06 (ATA) Current Profile: DVD+R DL Disc Information: Status: Empty State of Last Session: Empty Erasable: No Free Sectors: 3,827,520 Free Space: 7,838,760,960 bytes Free Time: 850:35:45 (MM:SS:FF) Next Writable Address: 0 Supported Write Speeds: 2.4x DVD±R DL Boundary Information: L0 Data Zone Capacity: 1,913,760 Changeable: No Physical Format Information (ADIP - L0): Disc ID: MKM-003-00 Book Type: DVD+R DL Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 16,580,607 Last Physical Sector in Layer 0: 2,283,519 Physical Format Information (ADIP - L1): Disc ID: MKM-003-00 Book Type: DVD+R DL Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 16,580,607 Last Physical Sector in Layer 0: 2,283,519 Physical Format Information (Last Recorded - L0): Disc ID: MKM-003-00 Book Type: DVD+R DL Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 16,580,607 Last Physical Sector in Layer 0: 2,110,367 Physical Format Information (Last Recorded - L1): Disc ID: MKM-003-00 Book Type: DVD+R DL Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 16,580,607 Last Physical Sector in Layer 0: 2,110,367 Performance (Write Speed): Descriptor 1... -> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00 -> EL: 0 (0x00000000) -> RS: 3,324 KB/s (2.4x) - WS: 3,324 KB/s (2.4x) ------- ; //****************************************\\ ; ImgBurn Version 2.5.1.0 - Log ; Wednesday, 31 March 2010, 16:55:17 ; \\****************************************// ; ; I 16:19:28 ImgBurn Version 2.5.1.0 started! I 16:19:28 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2) I 16:19:28 Total Physical Memory: 3,406,892 KB - Available: 2,733,932 KB W 16:19:28 Duplex Secure's SPTD driver can have a detrimental effect on drive performance. I 16:19:28 Initialising SPTI... I 16:19:28 Searching for SCSI / ATAPI devices... I 16:19:28 -> Drive 1 - Info: SONY DVD RW DRU-800A KY06 (E:) (ATA) I 16:19:28 -> Drive 2 - Info: TSSTcorp DVD+-RW TS-H653A D300 (I:) (ATA) I 16:19:28 -> Drive 3 - Info: NQDE DIB4PQ7K5 1.03 (J:) (SCSI) I 16:19:28 Found 2 DVD±RWs and 1 BD-ROM/HD DVD-ROM! I 16:21:46 Operation Started! I 16:21:46 Source File: C:\Documents and Settings\Paul\Desktop\fable2backup.dvd I 16:21:46 Source File Sectors: 3,825,924 (MODE1/2048) I 16:21:46 Source File Size: 7,835,492,352 bytes I 16:21:46 Source File Volume Identifier: XGD2DVD_NTSC I 16:21:46 Source File Volume Set Identifier: 34672923 I 16:21:46 Source File Implementation Identifier: Sonic Scenarist 3.1 I 16:21:46 Source File File System(s): ISO9660, UDF (1.02) I 16:21:46 Destination Device: [1:0:0] SONY DVD RW DRU-800A KY06 (E:) (ATA) I 16:21:46 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 2.4x) I 16:21:46 Destination Media Sectors: 4,173,824 I 16:21:46 Write Mode: DVD I 16:21:46 Write Type: DAO I 16:21:46 Write Speed: 2.4x I 16:21:46 Link Size: Auto I 16:21:46 Lock Volume: Yes I 16:21:46 Test Mode: No I 16:21:46 OPC: No I 16:21:46 BURN-Proof: Enabled I 16:21:46 Write Speed Successfully Set! - Effective: 3,324 KB/s (2.4x) I 16:21:46 User Specified L0 Data Zone Capacity: 1,913,760 I 16:22:17 Set L0 Data Zone Capacity Succeeded! I 16:22:17 Filling Buffer... (40 MB) I 16:22:18 Writing LeadIn... I 16:22:38 Writing Session 1 of 1... (1 Track, LBA: 0 - 3825923) I 16:22:38 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3825923) I 16:22:38 Writing Layer 0... (LBA: 0 - 1913759) W 16:22:52 Failed to Write Sectors 12544 - 12575 - Reason: Invalid Address For Write W 16:22:52 Retrying (1 of 20)... W 16:22:52 Retry Failed - Reason: Invalid Address For Write W 16:22:52 Retrying (2 of 20)... W 16:22:52 Retry Failed - Reason: Invalid Address For Write W 16:22:52 Retrying (3 of 20)... W 16:22:52 Retry Failed - Reason: Invalid Address For Write W 16:22:52 Retrying (4 of 20)... W 16:22:52 Retry Failed - Reason: Invalid Address For Write W 16:22:52 Retrying (5 of 20)... W 16:26:55 Retry Failed - Reason: Invalid Address For Write E 16:32:08 Failed to Write Sectors 12544 - 12575 - Reason: Invalid Address For Write E 16:32:08 Next Writable Address: 0 I 16:32:08 Synchronising Cache... W 16:32:25 User opted to skip the 'Close Track/Session/Disc' functions. E 16:32:25 Failed to Write Image! I 16:32:25 Exporting Graph Data... I 16:32:25 Graph Data File: C:\Documents and Settings\Paul\Application Data\ImgBurn\Graph Data Files\SONY_DVD_RW_DRU-800A_KY06_WEDNESDAY-MARCH-31-2010_4-21_PM_MKM-003-00_2.4x.ibg I 16:32:25 Export Successfully Completed! E 16:32:25 Operation Failed! - Duration: 00:10:39 I 16:32:25 Average Write Rate: 44 KB/s (0.0x) - Maximum Write Rate: 3,334 KB/s (2.4x) I 16:55:17 Close Request Acknowledged ; ; ; //****************************************\\ ; ImgBurn Version 2.5.1.0 - Log ; Wednesday, 31 March 2010, 16:16:20 ; \\****************************************// ; ; I 16:16:16 ImgBurn Version 2.5.1.0 started! I 16:16:16 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2) I 16:16:16 Total Physical Memory: 3,406,892 KB - Available: 2,740,228 KB W 16:16:16 Duplex Secure's SPTD driver can have a detrimental effect on drive performance. I 16:16:16 Initialising SPTI... I 16:16:16 Searching for SCSI / ATAPI devices... I 16:16:16 -> Drive 1 - Info: SONY DVD RW DRU-800A KY06 (E:) (ATA) I 16:16:16 -> Drive 2 - Info: TSSTcorp DVD+-RW TS-H653A D300 (I:) (ATA) I 16:16:16 -> Drive 3 - Info: NQDE DIB4PQ7K5 1.03 (J:) (SCSI) I 16:16:16 Found 2 DVD±RWs and 1 BD-ROM/HD DVD-ROM! I 16:16:20 Close Request Acknowledged I 16:16:20 Closing Down... I 16:16:20 Shutting down SPTI... I 16:16:20 ImgBurn closed! Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted March 31, 2010 Share Posted March 31, 2010 The firmware on your drive doesn't support the MKM-003-00 dye. Media Code Speed Edit V 1.2.0.6------------------------------------------ Firmware: SONY DVD RW DRU-800A KY06 Oct31 ,2005 Bootcode: SONY DVD RW DRU-800A 0Y082005/10/31 12:23 ------------------------------------------ DVD+R9 supported media types: 10 ------------------------------------------ CMC MAG D01-000 2.4x INFOME D01-000 2.4x MKM 001-000 4x,2.4x PHILIPS CD2-000 2.4x PHILIPS PD2-000 2.4x PRODISC D01-000 2.4x RICOHJPN D00-001 2.4x RICOHJPN D01-002 4x RITEK D01-001 2.4x RITEK X01-001 2.4x Get the 2.4x speed Verbatim discs (MKM-001-00 dye) instead or crossflash to the LiteOn SHOW-1693S KS0B firmware. Media Code Speed Edit V 1.2.0.6------------------------------------------ Firmware: LITE-ON DVDRW SOHW-1693SKS0B2005/08/22 16:30 Bootcode: LITE-ON DVDRW SOHW-1693S0S082005/08/22 16:30 ------------------------------------------ DVD+R9 supported media types: 12 ------------------------------------------ CMC MAG D01-000 4x,2.4x INFOME D01-000 2.4x MKM 001-000 4x,2.4x MKM 003-000 4x PHILIPS CD2-000 4x,2.4x PHILIPS PD2-000 2.4x PRODISC D01-000 2.4x RICOHJPN D00-001 2.4x RICOHJPN D01-002 2.4x RITEK D01-001 4x,2.4x RITEK S04-001 2.4x RITEK X01-001 2.4x Link to comment Share on other sites More sharing options...
paulusss Posted March 31, 2010 Author Share Posted March 31, 2010 Thanks a lot!!! Installed 1693S.KC4B.patched-cf and just burned 1 succesfull Cheers! Link to comment Share on other sites More sharing options...
dontasciime Posted March 31, 2010 Share Posted March 31, 2010 ^^ I know him :lol Link to comment Share on other sites More sharing options...
Recommended Posts