icu Posted December 9, 2010 Share Posted December 9, 2010 I have managed to burn 3 coasters with version 2.5.3.0 on my PIONEER BD-RW BDR-203 FIRMWARE 1.10(SATA). When I looked on the coasters I was amazed to see about 5-7 gaps in the burning on the media ! I was burning straight from an hard disk... one directory in a size of 25 GB. Media used is RITEK BD-R 2x speed. When I changed back to 2.5.2.0 problem disappeared, and no gaps on the media ! Please fix ! Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted December 9, 2010 Share Posted December 9, 2010 People just imagine this stuff, there's no difference between the two, I haven't been near the burning code for several versions now. I've done a shed load of BD burns over the past few weeks with 3 different BD drives and never had a problem. Link to comment Share on other sites More sharing options...
icu Posted December 9, 2010 Author Share Posted December 9, 2010 With all due respect m8... the 3 coasters are in the garbitch now... and I have returned to 2.5.2.0. You can check yourself or not... but that's what realy happened. I will wait to 2.5.4.0 before upgrading again. Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted December 9, 2010 Share Posted December 9, 2010 I don't have a 203 and I'm not going to buy one for a problem that doesn't exist. The program just doesn't have the level of control over a burn that you obviously think it does. All I do is send data to the drive. Success / failure is down to the drive/firmware/media combo being used. Link to comment Share on other sites More sharing options...
cornholio7 Posted December 9, 2010 Share Posted December 9, 2010 the tests here http://forum.imgburn.com/index.php?showtopic=16154&pid=125667&st=20entry125667 were done using 2.5.3.0 Link to comment Share on other sites More sharing options...
icu Posted December 10, 2010 Author Share Posted December 10, 2010 Many thanks for the tests results. But it was performed on the BDR-205 and not the old BDR-203. Thanks, but I will stay with the old version which works with my drive. Link to comment Share on other sites More sharing options...
Recommended Posts