Jump to content

Device not ready (Logical unit in process of becoming ready)


greyfox

Recommended Posts

I searched and found nothing. This started after my upgrade to Windows 7 64bit. Prior to Windows 7 I used Windows XP 32 bit. Not sure if any of that might affect it.

 

This is the log

 

I 21:09:28 ImgBurn Version 2.5.3.0 started!

I 21:09:28 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7600)

I 21:09:28 Total Physical Memory: 4,193,656 KB - Available: 2,305,284 KB

W 21:09:28 Duplex Secure's SPTD driver can have a detrimental effect on drive performance.

I 21:09:28 Initialising SPTI...

I 21:09:28 Searching for SCSI / ATAPI devices...

I 21:09:28 -> Drive 1 - Info: SONY DVD RW DW-U18A UYS3 (F:) (ATA)

I 21:09:30 -> Drive 2 - Info: TSSTcorp CDDVDW SH-S203N SB02 (E:) (ATA)

I 21:09:30 Found 1 DVD±RW and 1 DVD±RW/RAM!

I 21:10:18 Operation Started!

I 21:10:18 Source File: D:\Xbox 360\ZARTHREDZOM\ZARTHREDZOM.dvd

I 21:10:18 Source File Sectors: 3,827,488 (MODE1/2048)

I 21:10:18 Source File Size: 7,838,695,424 bytes

I 21:10:18 Source File Volume Identifier: DVD_ROM

I 21:10:18 Source File Volume Set Identifier: ec67c000MS UDFBridge

I 21:10:18 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)

I 21:10:18 Source File Implementation Identifier: Microsoft CDIMAGE UDF

I 21:10:18 Source File File System(s): ISO9660, UDF (1.50)

I 21:10:18 Destination Device: [0:0:0] TSSTcorp CDDVDW SH-S203N SB02 (E:) (ATA)

I 21:10:18 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67) (Speeds: 4x, 6x, 8x)

I 21:10:18 Destination Media Sectors: 4,173,824

I 21:10:18 Write Mode: DVD

I 21:10:18 Write Type: DAO

I 21:10:18 Write Speed: 2x

I 21:10:18 Link Size: Auto

I 21:10:18 Lock Volume: Yes

I 21:10:18 Test Mode: No

I 21:10:18 OPC: No

I 21:10:18 BURN-Proof: Enabled

W 21:10:18 Write Speed Miscompare! - Wanted: 2,770 KB/s (2x), Got: 5,540 KB/s (4x)

I 21:10:18 Book Type Setting: DVD-ROM

I 21:10:18 User Specified L0 Data Zone Capacity: 1,913,760

I 21:11:02 Set L0 Data Zone Capacity Succeeded!

I 21:11:03 Filling Buffer... (40 MB)

I 21:11:04 Writing LeadIn...

I 21:11:06 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487)

I 21:11:06 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487)

I 21:11:06 Writing Layer 0... (LBA: 0 - 1913759)

I 21:22:57 Writing Layer 1... (LBA: 1913760 - 3827487)

I 21:34:51 Synchronising Cache...

I 21:34:55 Closing Track...

I 21:34:58 Finalising Disc...

I 21:35:32 Exporting Graph Data...

I 21:35:32 Graph Data File: C:\Users\Foxhound\AppData\Roaming\ImgBurn\Graph Data Files\TSSTcorp_CDDVDW_SH-S203N_SB02_FRIDAY-DECEMBER-24-2010_9-10_PM_RICOHJPN-D01-67_2x.ibg

I 21:35:32 Export Successfully Completed!

I 21:35:32 Operation Successfully Completed! - Duration: 00:25:13

I 21:35:32 Average Write Rate: 5,375 KB/s (3.9x) - Maximum Write Rate: 5,582 KB/s (4.0x)

I 21:35:32 Cycling Tray before Verify...

W 21:35:39 Waiting for device to become ready...

 

If I missed anything let me know.

Edited by greyfox
Link to comment
Share on other sites

Update to imgburn 2.5.4, and also make sure your drive's firmware is up to date.

 

Also:

 

I 21:10:18 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67) (Speeds: 4x, 6x, 8x)
W 21:10:18 Write Speed Miscompare! - Wanted: 2,770 KB/s (2x), Got: 5,540 KB/s (4x)

 

You set your speed to 2x which is not supported by your disc so it automatically went to 4x. Try burning at 6x or 8x. See if you get better luck at an actual verify afterwards.

 

Although it is also recommended to use Verbatim discs for DVD+R DL, that have the disc ID (MKM-XXX-X) where X is 000-3, etc. I hope that helps, good luck.

Link to comment
Share on other sites

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.