Jump to content

I/O Error! Device [1:0:0] BDDVDRWCT21L 1.02 (F:) (SATA)


Hostlike

Recommended Posts

Anybody that can help me -

 

I'm currently trying to burn an ISO file to a DVD+R DL 8.5G Disc. 2.4x writing speed, it stops around 17 to 20 percent, and it throws up an error.

 

This is the error:

I/O Error!

Device [1:0:0] BDDVDRWCT21L 1.02 (F:) (SATA)

 

ScsiStatus:0x02

Interpretation: Check Condition

 

CDB: 2A 00 00 00 00 00 00 00 20 00

Intepretation: Write(10) - Sectors: 0 - 31

 

The error goes on, if you would like to see the rest of it, please let me know and I'll post the rest.

 

I can give more details about it, if you need it.

 

If anybody has a solution for my problem, or could shine some light on my situation, it'd be very appreciated.

 

Thank you, and best regards,

Hostlike

 

I would also like to point out, that the disk went from 8.5g to 7.96g. Is there anyway that I can delete the existing data

on the disc, or does ImgBurn automatically start off where it left off last unsuccessful disc burn? Or, does it overwrite

the existing files on the disc. Again, help is appreciated.

Link to comment
Share on other sites

Post the full log of the failed operation. The information you have isn't necessarily sufficient. The log of your attempt at burning said +R DL disc will yield more info.

 

One other thing about your first post:

 

I would also like to point out, that the disk went from 8.5g to 7.96g

 

Thats normal, for a +R DL it's true capacity (in GB) is 7.961 or 8,547,991,552 bytes (8.5GiB)

Edited by Rincewind
Link to comment
Share on other sites

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.