Jump to content

Verification 0 Kb/s?


renans

Recommended Posts

I'm brand new to this, but I have followed guides and tried my best to do all the research I possibly could before posting.

 

I am trying to burn an iso to a DVD+R DL Verbatim disk and it began working perfectly fine, it stopped at 13% and was at 0 Kb/s so I just left it on hoping that something was going to change and so I come back 2 hours later and still at 13%, I don't know what I was doing but it ended burning again?

It now stopped at 30% and is again currently at 0 Kb/s

 

Here is the log:

 

 

I 19:17:04 ImgBurn Version 2.5.5.0 started!

I 19:17:04 Microsoft Windows Vista Home Premium Edition (6.0, Build 6001 : Service Pack 1)

I 19:17:04 Total Physical Memory: 2,880,612 KB - Available: 1,707,736 KB

I 19:17:04 Initialising SPTI...

I 19:17:04 Searching for SCSI / ATAPI devices...

I 19:17:04 -> Drive 1 - Info: MATSHITA DVD-RAM UJ880ES 1.90 (E:) (ATA)

I 19:17:04 Found 1 DVD±RW/RAM!

I 19:18:35 Operation Started!

I 19:18:35 Source File: C:\Users\Renan Soares\Documents\Portal 2\mvl-p2p2.dvd

I 19:18:35 Source File Sectors: 3,827,488 (MODE1/2048)

I 19:18:35 Source File Size: 7,838,695,424 bytes

I 19:18:35 Source File Volume Identifier: DVD_ROM

I 19:18:35 Source File Volume Set Identifier: d0a44000MS UDFBridge

I 19:18:35 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)

I 19:18:35 Source File Implementation Identifier: Microsoft CDIMAGE UDF

I 19:18:35 Source File File System(s): ISO9660, UDF (1.50)

I 19:18:35 Destination Device: [2:0:0] MATSHITA DVD-RAM UJ880ES 1.90 (E:) (ATA)

I 19:18:35 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2.4x)

I 19:18:35 Destination Media Sectors: 4,173,824

I 19:18:35 Write Mode: DVD

I 19:18:35 Write Type: DAO

I 19:18:35 Write Speed: 2x

I 19:18:35 Link Size: Auto

I 19:18:35 Lock Volume: Yes

I 19:18:35 Test Mode: No

I 19:18:35 OPC: No

I 19:18:35 BURN-Proof: Enabled

W 19:18:35 Write Speed Miscompare! - Wanted: 2,770 KB/s (2x), Got: 3,324 KB/s (2.4x)

I 19:18:35 Optimal L0 Data Zone Capacity: 1,913,760

I 19:18:35 Optimal L0 Data Zone Method: Copied From Original Disc

I 19:18:56 Set L0 Data Zone Capacity Succeeded!

I 19:18:57 Filling Buffer... (40 MB)

I 19:18:58 Writing LeadIn...

I 19:18:59 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487)

I 19:18:59 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487)

I 19:18:59 Writing Layer 0... (LBA: 0 - 1913759)

 

 

I don't know what any of this means.. If anyone has a clue how to make it continue burning please help me out, if I'm missing out any information just let me know thanks !

Link to comment
Share on other sites

See if there are any firmware updates to your burner. To do that you must be in amy other mode except EZ-Mode Picker. Go to tools -> Drive -> Check for firmware updates.

 

Also:

I 19:18:35 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2.4x)

W 19:18:35 Write Speed Miscompare! - Wanted: 2,770 KB/s (2x), Got: 3,324 KB/s (2.4x)

 

Since only 2.4x was supported, 2.4x was used. DL discs cannot support burn speeds lower than 2.4x anyways, nor SL discs for that matter I think.

 

Anyways, if there are no updates available for your burner try cleaning your burner with a cleaning disc, and try again. Just remember to set the AWS to the proper speed of your discs, in this case 2.4x.

 

-edit

 

You seem to have cut off the log? Please include the ENTIRE log.

Edited by Rincewind
Link to comment
Share on other sites

You should enable Windows Update (look in Control Panel) so that your OS is updated to the latest version. After doing that, and possibly rebooting a few times, look for the latest drivers for your chipset/storage controllers (this website might help).

Link to comment
Share on other sites

See if there are any firmware updates to your burner. To do that you must be in amy other mode except EZ-Mode Picker. Go to tools -> Drive -> Check for firmware updates.

 

Also:

I 19:18:35 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2.4x)

W 19:18:35 Write Speed Miscompare! - Wanted: 2,770 KB/s (2x), Got: 3,324 KB/s (2.4x)

 

Since only 2.4x was supported, 2.4x was used. DL discs cannot support burn speeds lower than 2.4x anyways, nor SL discs for that matter I think.

 

Anyways, if there are no updates available for your burner try cleaning your burner with a cleaning disc, and try again. Just remember to set the AWS to the proper speed of your discs, in this case 2.4x.

 

-edit

 

You seem to have cut off the log? Please include the ENTIRE log.

 

Well the burn is STILL up, I didn't cut the log, it simply stopped right there.. Is there ANY way I can continue the burn?

Or do I just have to throw the disk away?

Link to comment
Share on other sites

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.