Jump to content

Homemade BD showing as data disc


KISSMAD

Recommended Posts

I've burned a homemade Blu-ray disc and my standalone BD player says it's a data disc. I've burned some BD movies before doing this and they were recognised as BD discs.

What am I doing wrong?

 

; //****************************************\\

; ImgBurn Version 2.5.5.0 - Log

; Friday, 13 May 2011, 22:59:52

; \\****************************************//

;

;

I 22:28:20 ImgBurn Version 2.5.5.0 started!

I 22:28:20 Microsoft Windows 7 Professional x64 Edition (6.1, Build 7601 : Service Pack 1)

I 22:28:20 Total Physical Memory: 6,289,912 KB - Available: 4,336,216 KB

I 22:28:20 Initialising SPTI...

I 22:28:20 Searching for SCSI / ATAPI devices...

I 22:28:20 -> Drive 1 - Info: HL-DT-ST BD-RE BH10LS30 1.00 (G:) (ATA)

I 22:28:20 -> Drive 2 - Info: HL-DT-ST DVD-RAM GH22NP20 2.00 (F:) (RAID)

I 22:28:20 Found 1 DVD±RW/RAM and 1 BD-RE!

I 22:29:44 Operation Started!

I 22:29:44 Device: [6:0:0] HL-DT-ST BD-RE BH10LS30 1.00 (G:) (ATA)

I 22:29:44 Media Type: BD-RE (Disc ID: VERBAT-IM0-000) (Speeds: 2.4x)

I 22:29:44 Quick Erase: Yes

I 22:29:44 Erasing Disc...

I 22:29:54 Synchronising Cache...

I 22:29:55 Operation Successfully Completed! - Duration: 00:00:10

I 22:30:01 Operation Started!

I 22:30:01 Building Image Tree...

I 22:30:03 Calculating Totals...

I 22:30:03 Preparing Image...

I 22:30:04 Contents: 21 Files, 7 Folders

I 22:30:04 Content Type: BD Video

I 22:30:04 Data Type: MODE1/2048

I 22:30:04 File System(s): UDF (2.50)

I 22:30:04 Volume Label: Def Leppard 2008-04-03 [bLU-RAY]

I 22:30:04 Size: 18,078,758,231 bytes

I 22:30:04 Sectors: 8,827,532

I 22:30:04 Image Size: 18,079,809,536 bytes

I 22:30:04 Image Sectors: 8,828,032

I 22:30:08 Operation Successfully Completed! - Duration: 00:00:06

I 22:30:08 Operation Started!

I 22:30:08 Source File: -==/\/[bUILD IMAGE]\/\==-

I 22:30:08 Source File Sectors: 8,828,032 (MODE1/2048)

I 22:30:08 Source File Size: 18,079,809,536 bytes

I 22:30:08 Source File Volume Identifier: Def Leppard 2008-04-03 [bLU-RAY]

I 22:30:08 Source File Volume Set Identifier: 3EADB3C00086B40C

I 22:30:08 Source File Application Identifier: ImgBurn v2.5.5.0

I 22:30:08 Source File Implementation Identifier: ImgBurn

I 22:30:08 Source File File System(s): UDF (2.50)

I 22:30:08 Destination Device: [6:0:0] HL-DT-ST BD-RE BH10LS30 1.00 (G:) (ATA)

I 22:30:08 Destination Media Type: BD-RE (Disc ID: VERBAT-IM0-000) (Speeds: 2.4x)

I 22:30:08 Destination Media Sectors: 12,219,392

I 22:30:08 Write Mode: BD

I 22:30:08 Write Type: DAO

I 22:30:08 Write Speed: 2.4x

I 22:30:08 BD-RE FastWrite: No

I 22:30:08 Link Size: Auto

I 22:30:08 Lock Volume: Yes

I 22:30:08 Test Mode: No

I 22:30:08 OPC: No

I 22:30:08 BURN-Proof: Enabled

I 22:30:08 Write Speed Successfully Set! - Effective: 10,338 KB/s (2.4x)

I 22:30:08 Filling Buffer... (40 MB)

I 22:30:09 Writing LeadIn...

I 22:30:09 Writing Session 1 of 1... (1 Track, LBA: 0 - 8828031)

I 22:30:09 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 8828031)

I 22:59:41 Synchronising Cache...

I 22:59:43 Operation Successfully Completed! - Duration: 00:29:35

I 22:59:43 Average Write Rate: 9,969 KB/s (2.2x) - Maximum Write Rate: 10,388 KB/s (2.3x)

I 22:59:51 Close Request Acknowledged

I 22:59:51 Closing Down...

I 22:59:52 Shutting down SPTI...

I 22:59:52 ImgBurn closed!

Edited by KISSMAD
Link to comment
Share on other sites

I 22:30:04 Content Type: BD Video

Well according to imgburn it burned it as a bluray video disc, but I did notice something else back up from your log...

 

I 22:29:44 Quick Erase: Yes

I 22:29:44 Erasing Disc...

 

This MIGHT be an issue. Consider doing a FULL erase (WITHOUT spare areas), and try burning your disc again.

 

Also try your disc on a software blu ray player on your computer. Either WinDVD or whatever is used to play bluray video discs on Windows.

 

Only other thing is consider updating your firmware:

 

http://www.firmwarehq.com/download_1757-file_BH10LS30_1.00-09.exe.html

Edited by Rincewind
Link to comment
Share on other sites

I 22:30:04 Content Type: BD Video

Well according to imgburn it burned it as a bluray video disc, but I did notice something else back up from your log...

 

I 22:29:44 Quick Erase: Yes

I 22:29:44 Erasing Disc...

 

This MIGHT be an issue. Consider doing a FULL erase (WITHOUT spare areas), and try burning your disc again.

 

Also try your disc on a software blu ray player on your computer. Either WinDVD or whatever is used to play bluray video discs on Windows.

 

Only other thing is consider updating your firmware:

 

http://www.firmwarehq.com/download_1757-file_BH10LS30_1.00-09.exe.html

I tried PowerDVD9 which came with the BD burner and I get this message.

"There is a disc with an unsupported format in drive G:"

 

When I installed the software for the BD burner, it updated the firmware but it looks like it updated my DVD burner firmware instead.

Link to comment
Share on other sites

Well if PowerDVD doesn't like your disc either, then go back and try re-encoding your source files. Unfortunately as far as that is concerned though, you will have to find a forum specifically for help with that, as we cannot help you with encoding, only burning, sorry.

Link to comment
Share on other sites

Well if PowerDVD doesn't like your disc either, then go back and try re-encoding your source files. Unfortunately as far as that is concerned though, you will have to find a forum specifically for help with that, as we cannot help you with encoding, only burning, sorry.

 

I actually downloaded the files so it looks like I wasted 16 GB of download data and now I have to try and upload 16 GB for nothing.

 

At least I know it's not a problem with the way I'm burning the files.

 

Thanks for your help Rincewind.

Link to comment
Share on other sites

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.