Jump to content

Logical Unit Communication CRC Error!


Recommended Posts

ImgBurn is a nice app no doubt I'd burned more than 100 DVDs and CDs with it,but recently it started to show some freaky error maybe this error occurred after I reformatted my system...This error shook me up!!

I tried to burn DVDs below 24x but that didn't solve my problem.I also tried to burn DVDs and CDs on 1x,2x,2.4x,5x but all was waste.Now I am very frustrated God damn someone help me out :0

Heres a log of Imgburn during the burning process..

I 18:18:54 Initialising SPTI...
I 18:18:54 Searching for SCSI / ATAPI devices...
I 18:18:54 -> Drive 1 - Info: HL-DT-ST DVD-RAM GH22NP20 1.02 (F:) (ATA)
I 18:18:54 Found 1 DVD±RW/RAM!
I 18:19:27 Operation Started!
I 18:19:27 Source File: C:\Documents and Settings\Ashutosh Rathore\Desktop\PES2011.ISO
I 18:19:27 Source File Sectors: 1,152,512 (MODE1/2048)
I 18:19:27 Source File Size: 2,360,344,576 bytes
I 18:19:27 Source File Volume Identifier: PES2011
I 18:19:27 Source File Volume Set Identifier: 5>=:?2=3SCEI
I 18:19:27 Source File Application Identifier: PLAYSTATION
I 18:19:27 Source File Implementation Identifier: DVD-ROM GENERATOR
I 18:19:27 Source File File System(s): ISO9660, UDF (1.02)
I 18:19:27 Destination Device: [0:1:0] HL-DT-ST DVD-RAM GH22NP20 1.02 (F:) (ATA)
I 18:19:27 Destination Media Type: DVD-R (Disc ID: MBI 01RG40) (Speeds: 4x, 8x, 12x, 16x)
I 18:19:27 Destination Media Sectors: 2,297,888
I 18:19:27 Write Mode: DVD
I 18:19:27 Write Type: DAO
I 18:19:27 Write Speed: MAX
I 18:19:27 Link Size: Auto
I 18:19:27 Lock Volume: Yes
I 18:19:27 Test Mode: No
I 18:19:27 OPC: No
I 18:19:27 BURN-Proof: Enabled
I 18:19:27 Write Speed Successfully Set! - Effective: 22,160 KB/s (16x)
I 18:19:27 Filling Buffer... (40 MB)
I 18:19:38 Writing LeadIn...
W 18:19:50 Failed to Write Sectors 0 - 31 - Reason: Logical Unit Communication CRC Error (ULTRA-DMA/32)
W 18:19:50 Retrying (1 of 20)...
I 18:19:59 Abort Request Acknowledged

Link to comment
Share on other sites

Run SIW, go to Hardware -> Motherboard, select all the lines on the right and copy/paste them here. Alternatively, you could try using this website to look for new drivers for your system devices.

 

If newer drivers don't solve your problem then you'll need to learn how to check cables/master-slave jumper/etc or ask someone to do it for you.

Link to comment
Share on other sites

SIW Report:

 

Property	Value
ASHU (Kobian PI945GCM)
Summary
Manufacturer	Kobian
Model	PI945GCM
Version	ECS
Serial Number	[unknown]
Bridge
North Bridge	Intel i945G Revision A2
South Bridge	Intel 82801GB (ICH7/R) Revision A1
CPU
Name	Intel(R) Celeron(R) CPU 420 @ 1.60GHz
Cpu Socket	Socket 775 LGA
Max CPU Speed	1600 MHz
Memory
Maximum Capacity	4096 MBytes
Maximum Memory Module Size	4096 MBytes
Memory Slots	4
Memory Type	DDR2
System Slots
ISA	0
PCI	0
AGP	0
VL-BUS	0
EISA	0
PCMCIA	0
ExpressCard	0
MCA	0

 

All drivers are current...but most of 'em are not digitally signed :)

Link to comment
Share on other sites

http://www.intel.com/p/en_US/support/detect/?iid=dc_iduu

 

try going here and run the intel driver update utility, click on 'check your system for the latest updates' and it should tell you what you need

 

otherwise as mmalves stated above

you'll need to learn how to check cables/master-slave jumper/etc or ask someone to do it for you
Link to comment
Share on other sites

Boot into safe mode and try burning a DVD-R with Test Mode enabled, so as to not actually write the disc but simulate the burn process. Does it work this way? Please post the log.

Link to comment
Share on other sites

Sorry for the late reply..

Well this week i tried my luck and on my own risks do these things:

1. Checked the tape like belt connected with CD ROM and mother board..

2. Checked the jumpers situated at the CD ROM drive...the jumper was at the middle i shifted it to the right most..

But these thing doesnt solve my problem before doing these thing I burned a image in safemode

THe following was the log:

I 16:30:11 ImgBurn Version 2.5.5.0 started!
I 16:30:11 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3)
I 16:30:11 Total Physical Memory: 1,039,668 KB  -  Available: 607,852 KB
I 16:30:11 Initialising SPTI...
I 16:30:11 Searching for SCSI / ATAPI devices...
I 16:30:11 -> Drive 1 - Info: HL-DT-ST DVD-RAM GH22NP20 1.02 (F:) (ATA)
I 16:30:11 -> Drive 2 - Info: MagicISO Virtual DVD-ROM 1.0A (H:) (Unknown)
I 16:30:11 Found 1 DVD-ROM and 1 DVD±RW/RAM!
I 16:30:28 Operation Started!
I 16:30:28 Source File: C:\Documents and Settings\Ashutosh Rathore\My Documents\Downloads\Compressed\HDLOADER8C.cue
I 16:30:28 Source File Sectors: 13,127 (MODE2/FORM1/2352)
I 16:30:28 Source File Size: 30,874,704 bytes
I 16:30:28 Source File Volume Identifier: MODE2CD
I 16:30:28 Source File File System(s): ISO9660
I 16:30:28 Destination Device: [0:1:0] HL-DT-ST DVD-RAM GH22NP20 1.02 (F:) (ATA)
I 16:30:28 Destination Media Type: CD-R (Disc ID: 97m27s18f, Plasmon Data Systems) (Speeds: 16x, 24x, 40x, 48x)
I 16:30:28 Destination Media Sectors: 359,847
I 16:30:28 Write Mode: CD
I 16:30:28 Write Type: SAO
I 16:30:28 Write Speed: 2x
I 16:30:28 Lock Volume: Yes
I 16:30:28 Test Mode: Yes
I 16:30:28 OPC: No
I 16:30:28 BURN-Proof: Enabled
W 16:30:28 Write Speed Miscompare! - Wanted: 353 KB/s (2x), Got: 2,822 KB/s (16x)
I 16:30:28 Filling Buffer... (40 MB)
I 16:30:28 Writing LeadIn...
W 16:30:58 Failed to Write Sectors -42 - -16 - Reason: Timeout on Logical Unit
W 16:30:58 Retrying (1 of 20)...
I 16:30:58 Writing LeadIn...
W 16:30:58 Failed to Write Sectors -15 - -1 - Reason: Logical Unit Communication CRC Error (ULTRA-DMA/32)
W 16:30:58 Retrying (1 of 20)...
I 16:30:58 Writing LeadIn...
W 16:30:58 Failed to Write Sectors 0 - 26 - Reason: Logical Unit Communication CRC Error (ULTRA-DMA/32)
W 16:30:58 Retrying (1 of 20)...
W 16:30:58 Retry Failed - Reason: Logical Unit Communication CRC Error (ULTRA-DMA/32)
W 16:30:58 Retrying (2 of 20)...
W 16:30:58 Retry Failed - Reason: Logical Unit Communication CRC Error (ULTRA-DMA/32)
W 16:30:58 Retrying (3 of 20)...
W 16:30:58 Retry Failed - Reason: Logical Unit Communication CRC Error (ULTRA-DMA/32)
W 16:30:58 Retrying (4 of 20)...
W 16:31:28 Retry Failed - Reason: Timeout on Logical Unit
W 16:31:28 Retrying (5 of 20)...
W 16:31:28 Retry Failed - Reason: Logical Unit Communication CRC Error (ULTRA-DMA/32)
W 16:31:28 Retrying (6 of 20)...
W 16:31:58 Retry Failed - Reason: Timeout on Logical Unit
W 16:31:58 Retrying (7 of 20)...
W 16:31:58 Retry Failed - Reason: Logical Unit Communication CRC Error (ULTRA-DMA/32)
W 16:31:58 Retrying (8 of 20)...
W 16:31:58 Retry Failed - Reason: Logical Unit Communication CRC Error (ULTRA-DMA/32)
W 16:31:58 Retrying (9 of 20)...
W 16:32:28 Retry Failed - Reason: Timeout on Logical Unit
W 16:32:28 Retrying (10 of 20)...
W 16:32:28 Retry Failed - Reason: Logical Unit Communication CRC Error (ULTRA-DMA/32)
W 16:32:28 Retrying (11 of 20)...
W 16:33:10 Retry Failed - Reason: Timeout on Logical Unit
W 16:33:10 Retrying (12 of 20)...
W 16:33:10 Retry Failed - Reason: Logical Unit Communication CRC Error (ULTRA-DMA/32)
W 16:33:10 Retrying (13 of 20)...
W 16:33:40 Retry Failed - Reason: Timeout on Logical Unit
W 16:33:40 Retrying (14 of 20)...
W 16:33:40 Retry Failed - Reason: Logical Unit Communication CRC Error (ULTRA-DMA/32)
W 16:33:40 Retrying (15 of 20)...
W 16:34:10 Retry Failed - Reason: Timeout on Logical Unit
W 16:34:10 Retrying (16 of 20)...
W 16:34:10 Retry Failed - Reason: Logical Unit Communication CRC Error (ULTRA-DMA/32)
W 16:34:10 Retrying (17 of 20)...
W 16:34:40 Retry Failed - Reason: Timeout on Logical Unit
W 16:34:40 Retrying (18 of 20)...
W 16:34:40 Retry Failed - Reason: Logical Unit Communication CRC Error (ULTRA-DMA/32)
W 16:34:40 Retrying (19 of 20)...
W 16:34:40 Retry Failed - Reason: Logical Unit Communication CRC Error (ULTRA-DMA/32)
W 16:34:40 Retrying (20 of 20)...
W 16:34:40 Retry Failed - Reason: Logical Unit Communication CRC Error (ULTRA-DMA/32)
W 16:36:14 Retrying (21)...
W 16:36:14 Retry Failed - Reason: Logical Unit Communication CRC Error (ULTRA-DMA/32)
W 16:36:14 Retrying (22)...
W 16:36:14 Retry Failed - Reason: Logical Unit Communication CRC Error (ULTRA-DMA/32)
W 16:36:15 Retrying (23)...
W 16:36:15 Retry Failed - Reason: Logical Unit Communication CRC Error (ULTRA-DMA/32)
E 16:36:17 Failed to Write Sectors 0 - 26 - Reason: Logical Unit Communication CRC Error (ULTRA-DMA/32)
I 16:36:17 Synchronising Cache...
W 16:36:18 Potential 'WaitImmediateIO' Deferred Error - (1/3) - Track Following Error
W 16:36:18 Synchronise Cache Failed! - Reason: Track Following Error
W 16:36:18 Retrying (1 of 3)...
W 16:36:21 User opted to skip the 'Close Track/Session/Disc' functions.
E 16:36:21 Failed to Write Image!
E 16:36:29 Operation Failed! - Duration: 00:05:53
I 16:36:29 Average Write Rate: N/A - Maximum Write Rate: N/A

Link to comment
Share on other sites

Have you tried replacing the cable for a decent new 80 wire one? If not, do so.

 

If you only have 1 drive (the burner) on the cable, make sure you configure the jumpers to 'Master' on the back of the drive. You want the motherboard connected at one end of the cable and the drive at the opposite end - leaving one blank connector in the middle.

Link to comment
Share on other sites

Have you tried replacing the cable for a decent new 80 wire one? If not, do so.

 

If you only have 1 drive (the burner) on the cable, make sure you configure the jumpers to 'Master' on the back of the drive. You want the motherboard connected at one end of the cable and the drive at the opposite end - leaving one blank connector in the middle.

 

I think my cable is 80 with lots of wire...

And its also new...

The jumpers are set to master..

Link to comment
Share on other sites

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.