Jump to content

Write Speed 16x


Luffy

Recommended Posts

I was burning Linux ISO to the disc. I wanted Write Speed 1x. I got 16x

I understand that the write speed is up to the drive. But 16x? Is it too fast?

ATAPI iHAS124 B AL0L

Disc ID: 97m15s17f, Ritek Co.

Edited by Luffy
Link to comment
Share on other sites

I understand that the write speed is up to the drive.

 

It is a combo of drive+firmware version+media.

 

 

1x is never an option for DVDs, and in fact even on CDs these days 1x just isn't available.

DVDs usually start at a minimum write speed of 2.4x, but depending on the drive/discs usually the slowest would probably be 4x.

 

I don't really know why some people still insist on such slow speeds anyhow, perhaps we really should make a sticky that includes recommended writing speeds, and also a notice saying that slowest speeds does not produce the best burns.

 

For single layered DVD+-Rs, 8x is usually fine but I don't see why 16x can't be used if you are using decent media such as Verbatim DVD+R (MCC DYE), up to date firmware on your burner, as well as most recent version of imgburn and running the latest XP or Win7 service packs.

 

Just remember to verify your burns. I see no reason why you can't burn successfully at 16x though.

Edited by Rincewind
Link to comment
Share on other sites

I 20:41:58 ImgBurn Version 2.5.5.0 started!

I 20:41:58 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7601 : Service Pack 1)

I 20:41:58 Total Physical Memory: 4,191,736 KB - Available: 3,166,624 KB

I 20:41:58 Initialising SPTI...

I 20:41:58 Searching for SCSI / ATAPI devices...

I 20:41:58 -> Drive 1 - Info: ATAPI iHAS124 B AL0L (D:) (SATA)

I 20:41:58 Found 1 DVD±RW/RAM!

I 20:45:34 Operation Started!

I 20:45:34 Source File: C:\Users\johan\Desktop\lubuntu-11.04.iso

I 20:45:34 Source File Sectors: 348,333 (MODE1/2048)

I 20:45:34 Source File Size: 713,385,984 bytes

I 20:45:34 Source File Volume Identifier: Lubuntu natty 20

I 20:45:34 Source File Volume Set Identifier: Ubuntu Linux http___www.ubuntu.com

I 20:45:34 Source File Application Identifier: Lubuntu natty 20110427 - i386

I 20:45:34 Source File File System(s): ISO9660 (Bootable), Joliet

I 20:45:34 Destination Device: [6:0:0] ATAPI iHAS124 B AL0L (D:) (SATA)

I 20:45:34 Destination Media Type: CD-R (Disc ID: 97m15s17f, Ritek Co.) (Speeds: 16x, 24x, 32x, 40x, 48x)

I 20:45:34 Destination Media Sectors: 359,843

I 20:45:34 Write Mode: CD

I 20:45:34 Write Type: SAO

I 20:45:34 Write Speed: 1x

I 20:45:34 Lock Volume: Yes

I 20:45:34 Test Mode: No

I 20:45:34 OPC: No

I 20:45:34 BURN-Proof: Enabled

W 20:45:34 Write Speed Miscompare! - Wanted: 176 KB/s (1x), Got: 2,823 KB/s (16x)

I 20:45:34 Advanced Settings - Force HT: No, Online HT: No, OverSpeed: No, SmartBurn: Yes

I 20:45:35 Filling Buffer... (40 MB)

I 20:45:36 Writing LeadIn...

I 20:45:54 Writing Session 1 of 1... (1 Track, LBA: 0 - 348332)

I 20:45:54 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 348332)

I 20:50:43 Synchronising Cache...

I 20:50:54 Exporting Graph Data...

I 20:50:54 Graph Data File: C:\Users\johan\AppData\Roaming\ImgBurn\Graph Data Files\ATAPI_iHAS124_B_AL0L_FRIDAY-MAY-20-2011_8-45_PM_97m15s17f_1x.ibg

I 20:50:54 Export Successfully Completed!

I 20:50:54 Operation Successfully Completed! - Duration: 00:05:19

I 20:50:54 Average Write Rate: 2,418 KB/s (16.1x) - Maximum Write Rate: 2,442 KB/s (16.3x)

I 20:50:54 Cycling Tray before Verify...

W 20:51:02 Waiting for device to become ready...

I 20:51:10 Device Ready!

I 20:51:12 Operation Started!

I 20:51:12 Source Device: [6:0:0] ATAPI iHAS124 B AL0L (D:) (SATA)

I 20:51:12 Source Media Type: CD-R (Disc ID: 97m15s17f, Ritek Co.) (Speeds: 16x, 24x, 32x, 40x, 48x)

I 20:51:12 Image File: C:\Users\johan\Desktop\lubuntu-11.04.iso

I 20:51:12 Image File Sectors: 348,333 (MODE1/2048)

I 20:51:12 Image File Size: 713,385,984 bytes

I 20:51:12 Image File Volume Identifier: Lubuntu natty 20

I 20:51:12 Image File Volume Set Identifier: Ubuntu Linux http___www.ubuntu.com

I 20:51:12 Image File Application Identifier: Lubuntu natty 20110427 - i386

I 20:51:12 Image File File System(s): ISO9660 (Bootable), Joliet

I 20:51:12 Read Speed (Data/Audio): MAX / MAX

I 20:51:12 Verifying Session 1 of 1... (1 Track, LBA: 0 - 348332)

I 20:51:12 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 348332)

I 20:53:29 Exporting Graph Data...

I 20:53:29 Graph Data File: C:\Users\johan\AppData\Roaming\ImgBurn\Graph Data Files\ATAPI_iHAS124_B_AL0L_FRIDAY-MAY-20-2011_8-45_PM_97m15s17f_1x.ibg

I 20:53:29 Export Successfully Completed!

I 20:53:29 Operation Successfully Completed! - Duration: 00:02:17

I 20:53:29 Average Verify Rate: 5,085 KB/s (33.9x) - Maximum Verify Rate: 7,174 KB/s (47.8x)

Link to comment
Share on other sites

I 20:45:34 Destination Media Type: CD-R (Disc ID: 97m15s17f, Ritek Co.) (Speeds: 16x, 24x, 32x, 40x, 48x)

16x is the slowest speed your burner supports on that media, and being it CD media, it's probably the best burn quality you can get. Besides, it verified OK, which means the disc is a good copy of your source ISO image, so you don't need to worry about it.

Link to comment
Share on other sites

I 20:45:34 Destination Media Type: CD-R (Disc ID: 97m15s17f, Ritek Co.) (Speeds: 16x, 24x, 32x, 40x, 48x)

16x is the slowest speed your burner supports on that media, and being it CD media, it's probably the best burn quality you can get. Besides, it verified OK, which means the disc is a good copy of your source ISO image, so you don't need to worry about it.

 

Does it mean that no matter what write speed is. As long as it verified OK. It's a perfect burn, right?

Link to comment
Share on other sites

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.